Intel® Stratix® 10 TX Transceiver Signal Integrity Development Kit User Guide

Download PDF
ID 683591
Date 9/27/2019
Public
Document Table of Contents
Document Table of Contents x
1. Overview 2. Getting Started 3. Development Kit Setup 4. Development Kit Components 5. Board Test System A. Additional Information B. Revision History
1. Overview x
1.1. General Development Kit Description 1.2. Recommended Operating Conditions 1.3. Handling the Kit
2. Getting Started x
2.1. About the Intel® Quartus® Prime Software 2.2. Development Kit Package 2.3. Installing the Intel® FPGA Download Cable II Driver
3. Development Kit Setup x
3.1. Setting up the Development Kit 3.2. Factory Default Switch and Jumper Settings
4. Development Kit Components x
4.1. Development Kit Overview 4.2. Intel® Stratix® 10 TX FPGA 4.3. MAX® V CPLD 4.4. FPGA Configuration 4.5. Status and Setup Elements 4.6. User Input-Output Components 4.7. Clocks 4.8. Transceiver Channels 4.9. Communication Ports 4.10. Flash Memory 4.11. System Power
4.4. FPGA Configuration x
4.4.1. Configuring the FPGA over Embedded Intel® FPGA Download Cable II 4.4.2. Configuring the FPGA through Flash Memory 4.4.3. Configuring the FPGA over External Intel® FPGA Download Cable
4.7. Clocks x
4.7.1. Transceiver Dedicated Clocks 4.7.2. General-Purpose Clocks 4.7.3. Embedded Intel® FPGA Download Cable II Clock
4.10. Flash Memory x
4.10.1. Parallel NOR Flash Memory 4.10.2. EPCQL Flash Memory
4.11. System Power x
4.11.1. Power Guidelines 4.11.2. Power Supply 4.11.3. Power Management 4.11.4. Power Distribution System 4.11.5. Thermal Limitations and Protection Guidelines
5. Board Test System x
5.1. Preparing the Development Kit 5.2. Running the Board Test System 5.3. Using the Board Test System 5.4. Simple Socket Server
5.3. Using the Board Test System x
5.3.1. The Configure Menu 5.3.2. The System Info Tab 5.3.3. The GPIO Tab 5.3.4. The EPCQ Tab 5.3.5. The FMC+ Tab 5.3.6. The PAM4 Tab 5.3.7. The MXP Tab 5.3.8. The QSFPDD1x2 Tab 5.3.9. The QSFPDD2x1 Tab 5.3.10. Power Monitor 5.3.11. Clock Controller
A. Additional Information x
A.1. Add SmartVID settings in QSF file A.2. Safety and Regulatory Information A.3. Compliance and Conformity Information
A.2. Safety and Regulatory Information x
A.2.1. Safety Warnings A.2.2. Safety Cautions
1. Overview
2. Getting Started
3. Development Kit Setup
4. Development Kit Components
5. Board Test System
A. Additional Information
B. Revision History

5.4. Simple Socket Server

The Intel® Stratix® 10 TX Transceiver Signal Integrity Development Kit ships with the Simple Socket Server design example stored in the factory portion of the EPCQL flash memory. The design consists of a Nios® II embedded processor and an Ethernet MAC.

When you power up the board, the Intel® Stratix® 10 TX FPGA configures with the Simple Socket Server design example. The design can obtain an IP address from any DHCP server and serve a telnet server to any host computer on the same network. The telnet server allows you to control the LEDs on the board.

The source code for the Simple Socket Server design resides in the <package dir>\examples\simple_socket_server directory. If the Simple Socket Server is corrupted or deleted from the flash memory, you might need to restore the board's original contents, using the BTS application.

Level Two Title