Visible to Intel only — GUID: wuf1508436206567
Ixiasoft
1. Introduction
2. FPGA Configuration First Mode
3. HPS Boot First Mode
4. Creating the Configuration Files
5. Golden System Reference Design and Design Examples
6. Configuring the FPGA Fabric from HPS Software
7. Debugging the Agilex™ 7 SoC FPGA Boot Flow
8. SoC FPGA Boot User Guide Archives
9. Document Revision History for Agilex™ 7 SoC FPGA Boot User Guide
A. Boot Scratch Registers
4.1. Overview
4.2. Quartus® Prime Hardware Project Compilation
4.3. Bootloader Software Compilation
4.4. Programming File Generator
4.5. Configuration over JTAG
4.6. Configuration from QSPI
4.7. Configuration over AVST
4.8. Configuration via Protocol
4.9. Remote System Update
4.10. Partial Reconfiguration
A.1. BOOT_SCRATCH_COLD0
A.2. BOOT_SCRATCH_COLD1
A.3. BOOT_SCRATCH_COLD2
A.4. BOOT_SCRATCH_COLD3
A.5. BOOT_SCRATCH_COLD4, BOOT_SCRATCH_COLD5
A.6. BOOT_SCRATCH_COLD6, BOOT_SCRATCH_COLD7
A.7. BOOT_SCRATCH_COLD8
A.8. BOOT_SCRATCH_COLD9
A.9. BOOT_SCRATCH_COLD0, BOOT_SCRATCH_COLD1, BOOT_SCRATCH_COLD8, BOOT_SCRATCH_COLD9
Visible to Intel only — GUID: wuf1508436206567
Ixiasoft
2.2.3. Single SDM Flash
In a single flash attached to SDM layout, the flash contains all of the files required for booting, including the configuration bitstream and OS files.
Software running on the HPS such as the FSBL must request permission from the SDM to access the flash attached to the SDM.
In the Quad SPI flash example, the SSBL, OS and file system reside in the Unsorted Block Image File System (UBIFS).
Figure 4. FPGA Configuration First Layout with Quad SPI