Visible to Intel only — GUID: ctp1620253579361
Ixiasoft
1. Introduction
2. FPGA Configuration First Mode
3. HPS Boot First Mode
4. Creating the Configuration Files
5. Golden System Reference Design and Design Examples
6. Configuring the FPGA Fabric from HPS Software
7. Debugging the Intel® Agilex™ SoC FPGA Boot Flow
A. Document Revision History for Intel® Agilex™ SoC FPGA Boot User Guide
Visible to Intel only — GUID: ctp1620253579361
Ixiasoft
4.7.1. FPGA Configuration First
The following figure shows an overview of the process:
Figure 21. Configuration over Avalon Streaming Using FPGA Configuration First
The following steps are involved:
- Compile hardware project with Intel® Quartus® Prime to obtain the SOF file.
- Compile the HPS FSBL source code to obtain the HPS FSBL hex file, or use a precompiled file.
- Use Programming File Generator to create the following files:
Raw Binary File (RBF): contains the configuration bitstream in binary format.
- Set MSEL to the AVST mode.
- Power up, power cycle or toggle nCONFIG on the device.
- Use an external master connected over AVST to configure the device using the RBF File.