Video and Vision Processing Suite Intel® FPGA IP User Guide

ID 683329
Date 9/30/2024
Public
Document Table of Contents
1. About the Video and Vision Processing Suite 2. Getting Started with the Video and Vision Processing IPs 3. Video and Vision Processing IPs Functional Description 4. Video and Vision Processing IP Interfaces 5. Video and Vision Processing IP Registers 6. Video and Vision Processing IPs Software Programming Model 7. Protocol Converter Intel® FPGA IP 8. 1D LUT Intel® FPGA IP 9. 3D LUT Intel® FPGA IP 10. Adaptive Noise Reduction Intel® FPGA IP 11. Advanced Test Pattern Generator Intel® FPGA IP 12. AXI-Stream Broadcaster Intel® FPGA IP 13. Bits per Color Sample Adapter Intel® FPGA IP 14. Black Level Correction Intel® FPGA IP 15. Black Level Statistics Intel® FPGA IP 16. Chroma Key Intel® FPGA IP 17. Chroma Resampler Intel® FPGA IP 18. Clipper Intel® FPGA IP 19. Clocked Video Input Intel® FPGA IP 20. Clocked Video to Full-Raster Converter Intel® FPGA IP 21. Clocked Video Output Intel® FPGA IP 22. Color Plane Manager Intel® FPGA IP 23. Color Space Converter Intel® FPGA IP 24. Defective Pixel Correction Intel® FPGA IP 25. Deinterlacer Intel® FPGA IP 26. Demosaic Intel® FPGA IP 27. FIR Filter Intel® FPGA IP 28. Frame Cleaner Intel® FPGA IP 29. Full-Raster to Clocked Video Converter Intel® FPGA IP 30. Full-Raster to Streaming Converter Intel® FPGA IP 31. Genlock Controller Intel® FPGA IP 32. Generic Crosspoint Intel® FPGA IP 33. Genlock Signal Router Intel® FPGA IP 34. Guard Bands Intel® FPGA IP 35. Histogram Statistics Intel® FPGA IP 36. Interlacer Intel® FPGA IP 37. Mixer Intel® FPGA IP 38. Pixels in Parallel Converter Intel® FPGA IP 39. Scaler Intel® FPGA IP 40. Stream Cleaner Intel® FPGA IP 41. Switch Intel® FPGA IP 42. Text Box Intel® FPGA IP 43. Tone Mapping Operator Intel® FPGA IP 44. Test Pattern Generator Intel® FPGA IP 45. Unsharp Mask Intel® FPGA IP 46. Video and Vision Monitor Intel FPGA IP 47. Video Frame Buffer Intel® FPGA IP 48. Video Frame Reader Intel FPGA IP 49. Video Frame Writer Intel FPGA IP 50. Video Streaming FIFO Intel® FPGA IP 51. Video Timing Generator Intel® FPGA IP 52. Vignette Correction Intel® FPGA IP 53. Warp Intel® FPGA IP 54. White Balance Correction Intel® FPGA IP 55. White Balance Statistics Intel® FPGA IP 56. Design Security 57. Document Revision History for Video and Vision Processing Suite User Guide

44.2. Test Pattern Generator IP Parameters

The IP offers run time and compile time parameters.
Parameter Value Description
Interface Configuration
Lite mode On or off Turn on to use the Lite variant of the Intel FPGA Streaming Video protocol.
Bits per color sample 8 to 16 Select the number of bits per color sample
Number of pixels in parallel 1 to 8 Select the number of pixels in parallel at the output interface.
Output format 4:4:4, 4:2:2, 4:2:0. Variable or Monochrome Select the chroma sampling format for the output interface.
General
Memory-mapped control interface On or off Turn on for the Avalon memory-mapped control agent interface and allow runtime configuration via the register map. You must have the Avalon memory-mapped control agent interface when you turn on Lite mode.
Separate clock for control interface On or off Turn on for a separate clock for the control agent interface.
Debug features On or off Turn on for read back of writeable registers via the control agent interface.
Pipeline ready signals On or off Turn on to add extra pipeline registers to the AXI4-S tready signals.
Shared configuration
Fixed interlacing 0 to 15 Only if Memory-mapped control interface is not on. Select if output stream is progressive, interlaced with F0 sent first after reset, or interlaced with F1 sent first after reset. If Lite mode is off, the selected value populates the interlaced identifier field in the output image info packets.
  1. Values 0-7 give progressive output
  2. Values 8-11 give interlaced output with F0 send first
  3. Values 12-15 give interlaced output with F1 sent first
.
Fixed frame width 1 to 16384 Only if Memory-mapped control interface is off. Select the width of the frames and fields produced at the output. If the selected output subsampling is 4:2:2 or 4:2:0, the frame width must be a multiple of 2.
Fixed frame height 1 to 16384 Only if Memory-mapped control interface is off. Select the height of the frames and fields produced at the output. If the selected output subsampling is 4:2:0, the field height must be a multiple of 2.
Pattern configuration
Fixed bars mode Color, Greyscale, Black and white, Mixed Only if Memory-mapped control interface is off and you select the bars test pattern. Sets which variant of the bars pattern to use.
Fixed constant color R/Cr 0 – (2^ Bits per color sample)-1 Only if Memory-mapped control interface is off and you select the constant color test pattern. Sets the value the IP uses for the R color plane if the output is RGB, or the Cr color plane if the output is YCbCr.
Fixed constant color G/Y 0 – (2^ Bits per color sample)-1 Only if Memory-mapped control interface is off and you select the constant color test pattern. Sets the value the IP uses for the G color plane if the output is RGB, or the Y color plane if the output is YCbCr.
Fixed constant color B/Cb 0 – (2^ Bits per color sample)-1 Only if Memory-mapped control interface is off and you select the constant color test pattern. Sets the value the IP uses for the B color plane if the output is RGB, or the Cb color plane if the output is YCbCr.
Fixed zone plate coarse scaling factor 1 to 31 Only if Memory-mapped control interface is off. Increase this value to increase the size of the zone plate. The value is arbitrary, but Intel recommends a starting value of 14 for HD and 20 for 4k resolutions.
Fixed zone plate fine tune scaling factor

1 to 65535

Only if Memory-mapped control interface is off. A 16-bit fixed-point value, with 8 bits fractional part. For example, 256 represents a value of 1.0. Increase this value to decrease the size of the zone plate.
Fixed clock background color (B/Cb component) 0– (2^ Bits per color sample)-1 Only if Memory-mapped control interface is off. Select the value the IP uses for the B background color plane if the output is RGB, or the Cb color plane if the output is YCbCr.
Fixed clock background color (G/Y component) 0– (2^ Bits per color sample)-1 Only if Memory-mapped control interface is off. Sets the value the IP uses for the G background color plane if the output is RGB, or the Y color plane if the output is YCbCr.
Fixed clock background color (R/Cr component) 0– (2^ Bits per color sample)-1 Only if Memory-mapped control interface is off. Select the value the IP uses for the R background color plane if the output is RGB, or the Cr color plane if the output is YCbCr.
Fixed clock font color (B/Cb component) 0– (2^ Bits per color sample)-1 Only if Memory-mapped control interface is off. Select the value the IP uses for the B font color plane if the output is RGB, or the Cb color plane if the output is YCbCr.
Fixed clock font color (G/Y component) 0– (2^ Bits per color sample)-1 Only if Memory-mapped control interface is off. Select the value the IP uses for the G font color plane if the output is RGB, or the Y color plane if the output is YCbCr.
Fixed clock font color (R/Cr component) 0– (2^ Bits per color sample)-1 Only if Memory-mapped control interface is off. Select the value the IP uses for the R font color plane if the output is RGB, or the Cr color plane if the output is YcbCr.
Fixed clock location x-coordinate 0 to 16383 Only if Memory-mapped control interface is off. Select the x-location of the top-left pixel of the digital clock.
Fixed clock location y-coordinate 0 to 16383 Only if Memory-mapped control interface is off. Select the y-location of the top-left pixel of the digital clock.
Fixed clock scale factor 1 to 65535 Only if Memory-mapped control interface is off and you select the digital clock test pattern. Selectt the multiplying coefficient to the original digital clock dimensions.
Fixed clock FPS 1 to 60 Only if Memory-mapped control interface is off. Select the number of frames until one second is reached. This parameter does not affect the output video refresh rate).
Number of test patterns 1 to 8 Set the number of test pattern configurations to turn on.

Core 0 test pattern

Core 1 test pattern

Core 2 test pattern

Core 3 test pattern

Core 4 test pattern

Core 5 test pattern

Core 6 test pattern

Core 7 test pattern

Bars, Constant color, SDI pathological, Zone plate, Digital clock Selects the test pattern for each configuration.

Core 0 color space

Core 1 color space

Core 2 color space

Core 3 color space

Core 4 color space

Core 5 color space

Core 6 color space

Core 7 color space

RGB, YCbCr 444, YCbCr 422, YCbCr 420, MONO Sets the output color space and chroma sampling for each test pattern configuration.