DisplayPort Intel® FPGA IP User Guide

ID 683273
Date 1/24/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.3.3. Required Hardware

The hardware demonstration requires the following hardware:

  • Intel FPGA kit (includes USB cable to connect the board to your PC); the demonstration supports the following kits:
    • Stratix V GX FPGA Development Kit (5SGXEA7K2F40C2)
    • Arria V GX FPGA Starter Kit (5AGXFB3H4F40C5)
    • Cyclone V GT FPGA Development Kit (5CGTFD9E5F35C7)
  • Bitec DisplayPort daughter card (HSMC revision 11 and later)
  • PC with a DisplayPort output
  • Monitor with a DisplayPort input
  • Two DisplayPort cables
    • One cable connects from the graphics card to the FPGA development board
    • The other cable connects from the FPGA development board to the monitor
Note: Intel recommends that you first test the PC and monitor by connecting the PC directly to the monitor to ensure that you have all drivers installed correctly.