Agilex™ 7 Device Family Pin Connection Guidelines: M-Series

ID 776197
Date 6/12/2024
Public
Document Table of Contents

1.6.12. HPS UART Pins

Note: Altera recommends that you create an Quartus® Prime design, enter your device I/O assignments, and compile the design. The Quartus® Prime software will check your pin connections according to I/O assignment and placement rules. The rules differ from one device to another based on device density, package, I/O assignments, voltage assignments, and other factors that are not fully described in this document or the device user guides.
Table 28.  HPS UART PinsThere are two UART (UART0 and UART1) controllers for the Agilex™ 7 M-Series HPS.
HPS Pin Function Pin Description and Connection Guidelines Pin Type Valid Assignments (select from one of the groups)
Group 1 Group 2 Group 3
UART0_CTS_N

UART0 Clear to Send.

This is an active-low signal.

Input HPS_IOA_1 HPS_IOA_21 HPS_IOB_1
UART0_RTS_N

UART0 Request to Send.

This is an active-low signal.

Output HPS_IOA_2 HPS_IOA_22 HPS_IOB_2
UART0_TX UART0 Transmit. Output HPS_IOA_3 HPS_IOA_23 HPS_IOB_3
UART0_RX UART0 Receive. Input HPS_IOA_4 HPS_IOA_24 HPS_IOB_4
UART1_CTS_N

UART1 Clear to Send.

This is an active-low signal.

Input HPS_IOA_5 HPS_IOB_5 HPS_IOB_17
UART1_RTS_N

UART1 Request to Send.

This is an active-low signal.

Output HPS_IOA_6 HPS_IOB_6 HPS_IOB_18
UART1_TX UART1 Transmit. Output HPS_IOA_7 HPS_IOB_7 HPS_IOB_15
UART1_RX UART1 Receive. Input HPS_IOA_8 HPS_IOB_8 HPS_IOB_16