Intel® Quartus® Prime Pro Edition User Guide: Getting Started

Download PDF
ID 683463
Date 12/04/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Answers to Top FAQs 2. Introduction to Intel® Quartus® Prime Pro Edition 3. Planning FPGA Design for RTL Flow 4. Selecting a Starting Point for Your Intel® Quartus® Prime Pro Edition Project 5. Working With Intel® FPGA IP Cores 6. Managing Intel® Quartus® Prime Projects A. Next Steps After Getting Started B. Using the Design Space Explorer II C. Document Revision History for Intel® Quartus® Prime Pro Edition User Guide Getting Started D. Intel® Quartus® Prime Pro Edition User Guides
2. Introduction to Intel® Quartus® Prime Pro Edition x
2.1. Before You Begin
2.1. Before You Begin x
2.1.1. Prerequisite Knowledge and Training 2.1.2. Navigate Content Through Tasks 2.1.3. Acronyms
3. Planning FPGA Design for RTL Flow x
3.1. Design Planning 3.2. Selecting the Design Methodology 3.3. Related Trainings
3.1. Design Planning x
3.1.1. Creating a Design Specification and Test Plan 3.1.2. Planning for the Target Device or Board 3.1.3. Planning for Intellectual Property Cores 3.1.4. Planning for Standard Interfaces 3.1.5. Planning for Device Programming 3.1.6. Planning for Device Power Consumption 3.1.7. Planning for Interface I/O Pins 3.1.8. Planning for other EDA Tools 3.1.9. Planning for On-Chip Debugging Tools 3.1.10. Planning HDL Coding Styles
3.1.2. Planning for the Target Device or Board x
3.1.2.1. Device Migration Planning
3.1.8. Planning for other EDA Tools x
3.1.8.1. Third-Party Synthesis Tools 3.1.8.2. Third-Party Simulation Tools
3.1.10. Planning HDL Coding Styles x
3.1.10.1. Design Recommendations 3.1.10.2. Recommended HDL Coding Styles 3.1.10.3. Managing Metastability
3.2. Selecting the Design Methodology x
3.2.1. Flat Design Vs. Incremental Block-based Design 3.2.2. Partial Reconfiguration Design
4. Selecting a Starting Point for Your Intel® Quartus® Prime Pro Edition Project x
4.1. Creating a New FPGA Design Project 4.2. Migrating Projects from Other Intel® Quartus® Prime Editions to Intel® Quartus® Prime Pro Edition 4.3. Migrating Your AMD* Vivado* Project to Intel® Quartus® Prime Pro Edition 4.4. Migrating Projects Across Operating Systems 4.5. Migrating Project From One Device to Another 4.6. Related Trainings
4.1. Creating a New FPGA Design Project x
4.1.1. Using the Board-Aware Flow 4.1.2. Project Path Length Considerations
4.1.1. Using the Board-Aware Flow x
4.1.1.1. Creating a New Project from a Design Example 4.1.1.2. Specifying a Target Board for the Project
4.1.1.1. Creating a New Project from a Design Example x
4.1.1.1.1. Family, Device & Board Settings 4.1.1.1.2. Accessing Pre-Installed Design Examples 4.1.1.1.3. Accessing Online Design Examples 4.1.1.1.4. Accessing Downloaded Design Examples
4.1.1.1.3. Accessing Online Design Examples x
4.1.1.1.3.1. Internet Connectivity Options 4.1.1.1.3.2. Design Examples Options
4.2. Migrating Projects from Other Intel® Quartus® Prime Editions to Intel® Quartus® Prime Pro Edition x
4.2.1. Keeping Pro Edition Project Files Separate 4.2.2. Upgrading Project Assignments and Constraints 4.2.3. Upgrading IP Cores and Platform Designer Systems 4.2.4. Upgrading Non-Compliant Design RTL
4.2.2. Upgrading Project Assignments and Constraints x
4.2.2.1. Modifying Entity Name Assignments 4.2.2.2. Resolving Timing Constraint Entity Names 4.2.2.3. Verifying Generated Node Name Assignments 4.2.2.4. Replace Logic Lock (Standard) Regions 4.2.2.5. Modifying Signal Tap Logic Analyzer Files 4.2.2.6. Removing References to .qip Files 4.2.2.7. Removing Unsupported Feature Assignments
4.2.2.4. Replace Logic Lock (Standard) Regions x
4.2.2.4.1. Logic Lock Region Assignment Examples
4.2.4. Upgrading Non-Compliant Design RTL x
4.2.4.1. Verifying Verilog Compilation Unit 4.2.4.2. Updating Entity Auto-Discovery 4.2.4.3. Ensuring Distinct VHDL Namespace for Each Library 4.2.4.4. Removing Unsupported Parameter Passing 4.2.4.5. Removing Unsized Constant from WYSIWYG Instantiation 4.2.4.6. Removing Non-Standard Pragmas 4.2.4.7. Declaring Objects Before Initial Values 4.2.4.8. Confining SystemVerilog Features to SystemVerilog Files 4.2.4.9. Avoiding Assignment Mixing in Always Blocks 4.2.4.10. Avoiding Unconnected, Non-Existent Ports 4.2.4.11. Avoiding Invalid Parameter Ranges 4.2.4.12. Updating Verilog HDL and VHDL Type Mapping 4.2.4.13. Converting Symbolic BDF Files to Acceptable File Formats
4.2.4.1. Verifying Verilog Compilation Unit x
4.2.4.1.1. Verilog HDL Configuration Instantiation
4.4. Migrating Projects Across Operating Systems x
4.4.1. Migrating Design Files and Libraries 4.4.2. Design Library Migration Guidelines
4.4.1. Migrating Design Files and Libraries x
4.4.1.1. Use Relative Paths
5. Working With Intel® FPGA IP Cores x
5.1. IP Catalog and Parameter Editor 5.2. Installing and Licensing Intel® FPGA IP Cores 5.3. IP General Settings 5.4. Adding IP to IP Catalog 5.5. Best Practices for Intel® FPGA IP 5.6. Specifying the IP Core Parameters and Options ( Intel® Quartus® Prime Pro Edition) 5.7. IP Core Generation Output ( Intel® Quartus® Prime Pro Edition) 5.8. Scripting IP Core Generation 5.9. Modifying an IP Variation 5.10. Upgrading IP Cores 5.11. Simulating Intel® FPGA IP Cores 5.12. Generating Simulation Files for Platform Designer Systems and IP Variants 5.13. Synthesizing IP Cores in Other EDA Tools 5.14. Instantiating IP Cores in HDL 5.15. Support for the IEEE 1735 Encryption Standard 5.16. Related Trainings and Resources
5.1. IP Catalog and Parameter Editor x
5.1.1. The Parameter Editor
5.2. Installing and Licensing Intel® FPGA IP Cores x
5.2.1. Intel® FPGA IP Evaluation Mode
5.2.1. Intel® FPGA IP Evaluation Mode x
5.2.1.1. Intel FPGA IP Versioning 5.2.1.2. Checking the IP License Status
5.6. Specifying the IP Core Parameters and Options ( Intel® Quartus® Prime Pro Edition) x
5.6.1. Applying Preset Parameters for Specific Applications 5.6.2. Customizing IP Presets
5.6.1. Applying Preset Parameters for Specific Applications x
5.6.1.1. Viewing, Applying, and Deleting IP Presets
5.6.2. Customizing IP Presets x
5.6.2.1. Defining Preset Pin Assignments
5.6.2.1. Defining Preset Pin Assignments x
5.6.2.1.1. Defining Preset Pin Assignments in Pin Assignments Tab 5.6.2.1.2. Defining Preset Pin Assignments in a Pin File
5.10. Upgrading IP Cores x
5.10.1. Upgrading IP Cores at Command-Line 5.10.2. Migrating IP Cores to a Different Device 5.10.3. Troubleshooting IP or Platform Designer System Upgrade
5.11. Simulating Intel® FPGA IP Cores x
5.11.1. Generating IP Simulation Files 5.11.2. Scripting IP Simulation
5.11.2. Scripting IP Simulation x
5.11.2.1. Generating a Combined Simulator Setup Script
5.14. Instantiating IP Cores in HDL x
5.14.1. Example Top-Level Verilog HDL Module 5.14.2. Example Top-Level VHDL Module
6. Managing Intel® Quartus® Prime Projects x
6.1. Viewing Basic Project Information 6.2. Exploring Intel® Quartus® Prime Project Contents 6.3. Managing Project Settings 6.4. Viewing Parameter Settings From the Project Navigator 6.5. Managing Logic Design Files 6.6. Managing Timing Constraints 6.7. Integrating Other EDA Tools 6.8. Exporting Compilation Results 6.9. Archiving Projects 6.10. Command-Line Interface 6.11. Related Trainings
6.1. Viewing Basic Project Information x
6.1.1. Using the Compilation Dashboard 6.1.2. Viewing Project Reports 6.1.3. Viewing Project Messages
6.1.3. Viewing Project Messages x
6.1.3.1. Viewing Synthesis Warning Messages 6.1.3.2. Suppressing Message Display 6.1.3.3. Promoting Critical Warnings to Errors
6.2. Exploring Intel® Quartus® Prime Project Contents x
6.2.1. Project File Best Practices
6.5. Managing Logic Design Files x
6.5.1. Including Design Libraries 6.5.2. Creating a Project Copy
6.8. Exporting Compilation Results x
6.8.1. Exporting a Version-Compatible Compilation Database 6.8.2. Importing a Version-Compatible Compilation Database 6.8.3. Creating a Design Partition 6.8.4. Exporting a Design Partition 6.8.5. Reusing a Design Partition 6.8.6. Viewing Quartus Database File Information 6.8.7. Clearing Compilation Results
6.8.6. Viewing Quartus Database File Information x
6.8.6.1. QDB File Attribute Types
6.9. Archiving Projects x
6.9.1. Manually Adding Files To Archives 6.9.2. Archiving Projects for Service Requests 6.9.3. Archiving Projects for External Revision Control 6.9.4. Creating Database-Only Archives
6.9.3. Archiving Projects for External Revision Control x
6.9.3.1. Project Files to Include In External Revision Control
6.10. Command-Line Interface x
6.10.1. Project Revision Commands 6.10.2. Project Archive Commands 6.10.3. Project Database Commands
6.10.3. Project Database Commands x
6.10.3.1. quartus_cdb Executables to Manage Version-Compatible Databases
A. Next Steps After Getting Started x
A.1. Additional Resources A.2. Training
B. Using the Design Space Explorer II x
B.1. Optimizing Project Settings B.2. Running DSE II B.3. Setting Up Remote Farm Using Design Space Explorer II
B.1. Optimizing Project Settings x
B.1.1. Optimizing Settings with Design Space Explorer II B.1.2. Optimizing Settings with Project Revisions B.1.3. Back-Annotating Optimized Assignments
B.1.1. Optimizing Settings with Design Space Explorer II x
B.1.1.1. DSE II Computing Resources B.1.1.2. DSE II Optimization Parameters B.1.1.3. DSE II Result Management
1. Answers to Top FAQs
2. Introduction to Intel® Quartus® Prime Pro Edition
3. Planning FPGA Design for RTL Flow
4. Selecting a Starting Point for Your Intel® Quartus® Prime Pro Edition Project
5. Working With Intel® FPGA IP Cores
6. Managing Intel® Quartus® Prime Projects
A. Next Steps After Getting Started
B. Using the Design Space Explorer II
C. Document Revision History for Intel® Quartus® Prime Pro Edition User Guide Getting Started
D. Intel® Quartus® Prime Pro Edition User Guides

5.2.1. Intel® FPGA IP Evaluation Mode

The free Intel® FPGA IP Evaluation Mode allows you to evaluate licensed Intel® FPGA IP cores in simulation and hardware before purchase. Intel® FPGA IP Evaluation Mode supports the following evaluations without additional license:
  • Simulate the behavior of a licensed Intel® FPGA IP core in your system.
  • Verify the functionality, size, and speed of the IP core quickly and easily.
  • Generate time-limited device programming files for designs that include IP cores.
  • Program a device with your IP core and verify your design in hardware.

Intel® FPGA IP Evaluation Mode supports the following operation modes:

  • Tethered—Allows running the design containing the licensed Intel® FPGA IP indefinitely with a connection between your board and the host computer. Tethered mode requires a serial joint test action group (JTAG) cable connected between the JTAG port on your board and the host computer, which is running the Intel® Quartus® Prime Programmer for the duration of the hardware evaluation period. The Programmer only requires a minimum installation of the Intel® Quartus® Prime software, and requires no Intel® Quartus® Prime license. The host computer controls the evaluation time by sending a periodic signal to the device via the JTAG port. If all licensed IP cores in the design support tethered mode, the evaluation time runs until any IP core evaluation expires. If all of the IP cores support unlimited evaluation time, the device does not time-out.
  • Untethered—Allows running the design containing the licensed IP for a limited time. The IP core reverts to untethered mode if the device disconnects from the host computer running the Intel® Quartus® Prime software. The IP core also reverts to untethered mode if any other licensed IP core in the design does not support tethered mode.

When the evaluation time expires for any licensed Intel® FPGA IP in the design, the design stops functioning. All IP cores that use the Intel® FPGA IP Evaluation Mode time out simultaneously when any IP core in the design times out. When the evaluation time expires, you must reprogram the FPGA device before continuing hardware verification. To extend use of the IP core for production, purchase a full production license for the IP core.

You must purchase the license and generate a full production license key before you can generate an unrestricted device programming file. During Intel® FPGA IP Evaluation Mode, the Compiler only generates a time-limited device programming file (<project name> _time_limited.sof) that expires at the time limit.

Figure 27.  Intel® FPGA IP Evaluation Mode Flow
Note: Refer to each IP core's user guide for parameterization steps and implementation details.

Intel® licenses IP cores on a per-seat, perpetual basis. The license fee includes first-year maintenance and support. You must renew the maintenance contract to receive updates, bug fixes, and technical support beyond the first year. You must purchase a full production license for Intel® FPGA IP cores that require a production license, before generating programming files that you may use for an unlimited time. During Intel® FPGA IP Evaluation Mode, the Compiler only generates a time-limited device programming file (<project name> _time_limited.sof) that expires at the time limit. To obtain your production license keys, visit the Intel® FPGA Self-Service Licensing Center.

The Intel® FPGA Software License Agreements govern the installation and use of licensed IP cores, the Intel® Quartus® Prime design software, and all unlicensed IP cores.


Section Content
Intel FPGA IP Versioning
Checking the IP License Status

Related Information
Level Two Title