Intel® Quartus® Prime Pro Edition User Guide: Getting Started

Download PDF
ID 683463
Date 12/04/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Answers to Top FAQs 2. Introduction to Intel® Quartus® Prime Pro Edition 3. Planning FPGA Design for RTL Flow 4. Selecting a Starting Point for Your Intel® Quartus® Prime Pro Edition Project 5. Working With Intel® FPGA IP Cores 6. Managing Intel® Quartus® Prime Projects A. Next Steps After Getting Started B. Using the Design Space Explorer II C. Document Revision History for Intel® Quartus® Prime Pro Edition User Guide Getting Started D. Intel® Quartus® Prime Pro Edition User Guides
2. Introduction to Intel® Quartus® Prime Pro Edition x
2.1. Before You Begin
2.1. Before You Begin x
2.1.1. Prerequisite Knowledge and Training 2.1.2. Navigate Content Through Tasks 2.1.3. Acronyms
3. Planning FPGA Design for RTL Flow x
3.1. Design Planning 3.2. Selecting the Design Methodology 3.3. Related Trainings
3.1. Design Planning x
3.1.1. Creating a Design Specification and Test Plan 3.1.2. Planning for the Target Device or Board 3.1.3. Planning for Intellectual Property Cores 3.1.4. Planning for Standard Interfaces 3.1.5. Planning for Device Programming 3.1.6. Planning for Device Power Consumption 3.1.7. Planning for Interface I/O Pins 3.1.8. Planning for other EDA Tools 3.1.9. Planning for On-Chip Debugging Tools 3.1.10. Planning HDL Coding Styles
3.1.2. Planning for the Target Device or Board x
3.1.2.1. Device Migration Planning
3.1.8. Planning for other EDA Tools x
3.1.8.1. Third-Party Synthesis Tools 3.1.8.2. Third-Party Simulation Tools
3.1.10. Planning HDL Coding Styles x
3.1.10.1. Design Recommendations 3.1.10.2. Recommended HDL Coding Styles 3.1.10.3. Managing Metastability
3.2. Selecting the Design Methodology x
3.2.1. Flat Design Vs. Incremental Block-based Design 3.2.2. Partial Reconfiguration Design
4. Selecting a Starting Point for Your Intel® Quartus® Prime Pro Edition Project x
4.1. Creating a New FPGA Design Project 4.2. Migrating Projects from Other Intel® Quartus® Prime Editions to Intel® Quartus® Prime Pro Edition 4.3. Migrating Your AMD* Vivado* Project to Intel® Quartus® Prime Pro Edition 4.4. Migrating Projects Across Operating Systems 4.5. Migrating Project From One Device to Another 4.6. Related Trainings
4.1. Creating a New FPGA Design Project x
4.1.1. Using the Board-Aware Flow 4.1.2. Project Path Length Considerations
4.1.1. Using the Board-Aware Flow x
4.1.1.1. Creating a New Project from a Design Example 4.1.1.2. Specifying a Target Board for the Project
4.1.1.1. Creating a New Project from a Design Example x
4.1.1.1.1. Family, Device & Board Settings 4.1.1.1.2. Accessing Pre-Installed Design Examples 4.1.1.1.3. Accessing Online Design Examples 4.1.1.1.4. Accessing Downloaded Design Examples
4.1.1.1.3. Accessing Online Design Examples x
4.1.1.1.3.1. Internet Connectivity Options 4.1.1.1.3.2. Design Examples Options
4.2. Migrating Projects from Other Intel® Quartus® Prime Editions to Intel® Quartus® Prime Pro Edition x
4.2.1. Keeping Pro Edition Project Files Separate 4.2.2. Upgrading Project Assignments and Constraints 4.2.3. Upgrading IP Cores and Platform Designer Systems 4.2.4. Upgrading Non-Compliant Design RTL
4.2.2. Upgrading Project Assignments and Constraints x
4.2.2.1. Modifying Entity Name Assignments 4.2.2.2. Resolving Timing Constraint Entity Names 4.2.2.3. Verifying Generated Node Name Assignments 4.2.2.4. Replace Logic Lock (Standard) Regions 4.2.2.5. Modifying Signal Tap Logic Analyzer Files 4.2.2.6. Removing References to .qip Files 4.2.2.7. Removing Unsupported Feature Assignments
4.2.2.4. Replace Logic Lock (Standard) Regions x
4.2.2.4.1. Logic Lock Region Assignment Examples
4.2.4. Upgrading Non-Compliant Design RTL x
4.2.4.1. Verifying Verilog Compilation Unit 4.2.4.2. Updating Entity Auto-Discovery 4.2.4.3. Ensuring Distinct VHDL Namespace for Each Library 4.2.4.4. Removing Unsupported Parameter Passing 4.2.4.5. Removing Unsized Constant from WYSIWYG Instantiation 4.2.4.6. Removing Non-Standard Pragmas 4.2.4.7. Declaring Objects Before Initial Values 4.2.4.8. Confining SystemVerilog Features to SystemVerilog Files 4.2.4.9. Avoiding Assignment Mixing in Always Blocks 4.2.4.10. Avoiding Unconnected, Non-Existent Ports 4.2.4.11. Avoiding Invalid Parameter Ranges 4.2.4.12. Updating Verilog HDL and VHDL Type Mapping 4.2.4.13. Converting Symbolic BDF Files to Acceptable File Formats
4.2.4.1. Verifying Verilog Compilation Unit x
4.2.4.1.1. Verilog HDL Configuration Instantiation
4.4. Migrating Projects Across Operating Systems x
4.4.1. Migrating Design Files and Libraries 4.4.2. Design Library Migration Guidelines
4.4.1. Migrating Design Files and Libraries x
4.4.1.1. Use Relative Paths
5. Working With Intel® FPGA IP Cores x
5.1. IP Catalog and Parameter Editor 5.2. Installing and Licensing Intel® FPGA IP Cores 5.3. IP General Settings 5.4. Adding IP to IP Catalog 5.5. Best Practices for Intel® FPGA IP 5.6. Specifying the IP Core Parameters and Options ( Intel® Quartus® Prime Pro Edition) 5.7. IP Core Generation Output ( Intel® Quartus® Prime Pro Edition) 5.8. Scripting IP Core Generation 5.9. Modifying an IP Variation 5.10. Upgrading IP Cores 5.11. Simulating Intel® FPGA IP Cores 5.12. Generating Simulation Files for Platform Designer Systems and IP Variants 5.13. Synthesizing IP Cores in Other EDA Tools 5.14. Instantiating IP Cores in HDL 5.15. Support for the IEEE 1735 Encryption Standard 5.16. Related Trainings and Resources
5.1. IP Catalog and Parameter Editor x
5.1.1. The Parameter Editor
5.2. Installing and Licensing Intel® FPGA IP Cores x
5.2.1. Intel® FPGA IP Evaluation Mode
5.2.1. Intel® FPGA IP Evaluation Mode x
5.2.1.1. Intel FPGA IP Versioning 5.2.1.2. Checking the IP License Status
5.6. Specifying the IP Core Parameters and Options ( Intel® Quartus® Prime Pro Edition) x
5.6.1. Applying Preset Parameters for Specific Applications 5.6.2. Customizing IP Presets
5.6.1. Applying Preset Parameters for Specific Applications x
5.6.1.1. Viewing, Applying, and Deleting IP Presets
5.6.2. Customizing IP Presets x
5.6.2.1. Defining Preset Pin Assignments
5.6.2.1. Defining Preset Pin Assignments x
5.6.2.1.1. Defining Preset Pin Assignments in Pin Assignments Tab 5.6.2.1.2. Defining Preset Pin Assignments in a Pin File
5.10. Upgrading IP Cores x
5.10.1. Upgrading IP Cores at Command-Line 5.10.2. Migrating IP Cores to a Different Device 5.10.3. Troubleshooting IP or Platform Designer System Upgrade
5.11. Simulating Intel® FPGA IP Cores x
5.11.1. Generating IP Simulation Files 5.11.2. Scripting IP Simulation
5.11.2. Scripting IP Simulation x
5.11.2.1. Generating a Combined Simulator Setup Script
5.14. Instantiating IP Cores in HDL x
5.14.1. Example Top-Level Verilog HDL Module 5.14.2. Example Top-Level VHDL Module
6. Managing Intel® Quartus® Prime Projects x
6.1. Viewing Basic Project Information 6.2. Exploring Intel® Quartus® Prime Project Contents 6.3. Managing Project Settings 6.4. Viewing Parameter Settings From the Project Navigator 6.5. Managing Logic Design Files 6.6. Managing Timing Constraints 6.7. Integrating Other EDA Tools 6.8. Exporting Compilation Results 6.9. Archiving Projects 6.10. Command-Line Interface 6.11. Related Trainings
6.1. Viewing Basic Project Information x
6.1.1. Using the Compilation Dashboard 6.1.2. Viewing Project Reports 6.1.3. Viewing Project Messages
6.1.3. Viewing Project Messages x
6.1.3.1. Viewing Synthesis Warning Messages 6.1.3.2. Suppressing Message Display 6.1.3.3. Promoting Critical Warnings to Errors
6.2. Exploring Intel® Quartus® Prime Project Contents x
6.2.1. Project File Best Practices
6.5. Managing Logic Design Files x
6.5.1. Including Design Libraries 6.5.2. Creating a Project Copy
6.8. Exporting Compilation Results x
6.8.1. Exporting a Version-Compatible Compilation Database 6.8.2. Importing a Version-Compatible Compilation Database 6.8.3. Creating a Design Partition 6.8.4. Exporting a Design Partition 6.8.5. Reusing a Design Partition 6.8.6. Viewing Quartus Database File Information 6.8.7. Clearing Compilation Results
6.8.6. Viewing Quartus Database File Information x
6.8.6.1. QDB File Attribute Types
6.9. Archiving Projects x
6.9.1. Manually Adding Files To Archives 6.9.2. Archiving Projects for Service Requests 6.9.3. Archiving Projects for External Revision Control 6.9.4. Creating Database-Only Archives
6.9.3. Archiving Projects for External Revision Control x
6.9.3.1. Project Files to Include In External Revision Control
6.10. Command-Line Interface x
6.10.1. Project Revision Commands 6.10.2. Project Archive Commands 6.10.3. Project Database Commands
6.10.3. Project Database Commands x
6.10.3.1. quartus_cdb Executables to Manage Version-Compatible Databases
A. Next Steps After Getting Started x
A.1. Additional Resources A.2. Training
B. Using the Design Space Explorer II x
B.1. Optimizing Project Settings B.2. Running DSE II B.3. Setting Up Remote Farm Using Design Space Explorer II
B.1. Optimizing Project Settings x
B.1.1. Optimizing Settings with Design Space Explorer II B.1.2. Optimizing Settings with Project Revisions B.1.3. Back-Annotating Optimized Assignments
B.1.1. Optimizing Settings with Design Space Explorer II x
B.1.1.1. DSE II Computing Resources B.1.1.2. DSE II Optimization Parameters B.1.1.3. DSE II Result Management
1. Answers to Top FAQs
2. Introduction to Intel® Quartus® Prime Pro Edition
3. Planning FPGA Design for RTL Flow
4. Selecting a Starting Point for Your Intel® Quartus® Prime Pro Edition Project
5. Working With Intel® FPGA IP Cores
6. Managing Intel® Quartus® Prime Projects
A. Next Steps After Getting Started
B. Using the Design Space Explorer II
C. Document Revision History for Intel® Quartus® Prime Pro Edition User Guide Getting Started
D. Intel® Quartus® Prime Pro Edition User Guides

5.12. Generating Simulation Files for Platform Designer Systems and IP Variants

If your design contains Intel® FPGA IP or a Platform Designer system, you must first generate files for RTL simulation of the IP or system with the Intel® Quartus® Prime Platform Designer before running simulation.

When you generate the system (or IP variant), Platform Designer optionally creates simulation files, including the functional simulation model, any testbench (or example design), and vendor-specific simulator setup scripts for each IP core.

You can use the functional simulation model and any testbench or example design for simulation of the IP or system. The IP generation output may also include scripts to compile and run any testbench. The scripts list all models or libraries you require to simulate your IP core.

To generate the simulation model and simulator setup scripts for your Platform Designer system or component, follow these steps:

  1. Click Tools > Platform Designer. Platform Designer and open or create a Platform Designer system or IP variant.
  2. In Platform Designer, after specifying parameters, click Generate > Generate HDL. The Generation dialog box appears.
  3. Under Simulation, specify Verilog or VHDL for the Create simulation model option.
    Figure 48. Simulation Options in Generation Dialog Box


  4. Turn on or off the ModelSim, VCS-MX, VCS, Riviera-Pro, or Xcelium option to generate simulator setup scripts for the simulation tool. If you turn on no simulator options, the scripts generate for all simulators.
  5. Click the Generate button. Platform Designer generates the simulation models and setup scripts for your system or IP component in the following directory:
    <top-level system name>/<system name>/<sim>/<simulator>
    Figure 49. Generated Simulation Files Location


By default, Platform Designer generates the simulation scripts for the currently loaded system and all subsystems. Alternatively, you can open a subsystem to generate a simulation script only for that subsystem.

You can use scripts to compile the required device libraries and system design files in the correct order and elaborate or load the top-level system for simulation.

Table 27.  Simulation Script VariablesThe simulation scripts provide variables that allow flexibility in your simulation environment.
Variable Description
TOP_LEVEL_NAME If the testbench Platform Designer system is not the top‑level instance in your simulation environment because you instantiate the Platform Designer testbench within your own top-level simulation file, set the TOP_LEVEL_NAME variable to the top-level hierarchy name.
QSYS_SIMDIR If the simulation files generated by Platform Designer are not in the simulation working directory, use the QSYS_SIMDIR variable to specify the directory location of the Platform Designer simulation files.
QUARTUS_INSTALL_DIR Points to the Quartus installation directory that contains the device family library.

Top-Level Simulation HDL File for a Testbench System

The example below shows the pattern_generator_tb generated for a Platform Designer system called pattern_generator. The top.sv file defines the top-level module that instantiates the pattern_generator_tb simulation model, as well as a custom SystemVerilog test program with BFM transactions, called test_program. 

module top();
 pattern_generator_tb tb();
 test_program pgm();
endmodule
Level Two Title