Developer Guide

Intel® oneAPI DPC++/C++ Compiler Handbook for FPGAs

Download PDF
ID 785441
Date 6/24/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
Intel oneAPI DPC++/C++ Compiler Handbook for FPGAs Overview Introduction To FPGA Design Concepts Intel oneAPI FPGA Development Getting Started with the Intel oneAPI DPC++/C++ Compiler for Intel FPGA Development Defining a Kernel for FPGAs Debugging and Verifying Your Design Analyzing Your Design Optimizing Your Kernel Optimizing Your Host Application Integrating Your Kernel into DSP Builder for Intel FPGAs Integrating Your RTL IP Core Into a System RTL IP Core Kernel Interfaces Loops Pipes Data Types and Arithmetic Operations Parallelism Memories and Memory Operations Libraries Additional FPGA Acceleration Flow Considerations FPGA Optimization Flags, Attributes, Pragmas, and Extensions Quick Reference Additional Information Document Revision History for the Intel oneAPI DPC++/C++ Compiler Handbook for Intel FPGAs Notices and Disclaimers
Introduction To FPGA Design Concepts x
FPGA Architecture Overview Concepts of FPGA Hardware Design How Source Code Becomes a Custom Hardware Datapath
How Source Code Becomes a Custom Hardware Datapath x
Mapping Source Code Instructions to Hardware Scheduling Mapping Parallelism Models to FPGA Hardware Memory Types
Intel oneAPI FPGA Development x
FPGA Flow Terminology Intel oneAPI FPGA Development Flow Types of SYCL* FPGA Compilation FPGA Compilation Flags FPGA Workflows in IDEs
Types of SYCL* FPGA Compilation x
Separating Device and Host Code Compilation
Getting Started with the Intel oneAPI DPC++/C++ Compiler for Intel FPGA Development x
Installing the Intel oneAPI FPGA Development Environment FPGA Development for Intel oneAPI Toolkits with Visual Studio* Code
Installing the Intel oneAPI FPGA Development Environment x
Simulation Prerequisites Installing the Questa*-Intel FPGA Edition Software Set Up the Simulation Environment
FPGA Development for Intel oneAPI Toolkits with Visual Studio* Code x
Set the Environment Variables and Launch Visual Studio* Code Create an FPGA Visual Studio* Code Project Enable Code Completion in a Visual Studio* Code Project Configure Running and Debugging in a Visual Studio* Code Project Debugging Your Kernel in Visual Studio* Code with a Native Debugger Generate and View the FPGA Optimization Report Build and Run the FPGA Hardware Image
Defining a Kernel for FPGAs x
Suggested Kernel Coding Styles Single Work-Item Kernels
Single Work-Item Kernels x
Single Work-item Kernel Design Guidelines Single-Cycle Floating-Point Accumulator for Single Work-Item Kernels
Single-Cycle Floating-Point Accumulator for Single Work-Item Kernels x
Strategies for Inferring the Accumulator
Debugging and Verifying Your Design x
Device Selectors for FPGA printf Command Restrictions Emulate and Debug Your Design Evaluate Your Kernel Through Simulation
Emulate and Debug Your Design x
Emulator Environment Variables Compile and Emulate Your Design Limitations of the Emulator Troubleshooting Discrepancies in Hardware and Emulator Results Emulator Known Issues
Evaluate Your Kernel Through Simulation x
Debug During Verification Compile a Kernel for Simulation Simulate Your Kernel Viewing Simulation Waveforms Troubleshooting Simulator Issues
Analyzing Your Design x
Review the FPGA Optimization Report Quartus (Static) Summary Intel® FPGA Dynamic Profiler for DPC++
Review the FPGA Optimization Report x
Loop Analysis Bottlenecks Viewer Area Estimates System Viewer Kernel Memory Viewer Schedule Viewer Access FPGA Optimization Reports in JSON Format
Quartus (Static) Summary x
Timing Failures
Intel® FPGA Dynamic Profiler for DPC++ x
Measure Kernel Performance Instrument the Kernel Pipeline with Performance Counters (-Xsprofile) Obtain Profiling Data During Run Time Reduce Area Resource Use While Profiling Profiler Analyses of Example SYCL* Design Scenarios Limitations
Obtain Profiling Data During Run Time x
Invoke the Profiler Runtime Wrapper to Obtain Profiling Data Use Intel® VTune™ Profiler
Use Intel® VTune™ Profiler x
Interpret Performance Counter Data
Optimizing Your Host Application x
Throughput Resource Use System-level Profiling Using the Intercept Layer for OpenCL™ Applications Multithreaded Host Application Utilizing Hardware Kernel Invocation Queue Double Buffering Host Utilizing Kernel Invocation Queue N-Way Buffering to Overlap Kernel Execution Prepinning Memory Simple Host-Device Streaming Buffered Host-Device Streaming
System-level Profiling Using the Intercept Layer for OpenCL™ Applications x
Set Up the Intercept Layer for OpenCL™ Applications
Double Buffering Host Utilizing Kernel Invocation Queue x
Analyzing Buffering Using the Intercept Layer for OpenCL™ Applications
Integrating Your RTL IP Core Into a System x
Synthesize Your RTL IP Core with Quartus Prime Software Encrypting RTL IP Cores Add an RTL IP Core into a Platform Designer System Add an RTL IP Core into a Quartus Prime Project
Encrypting RTL IP Cores x
Encrypting RTL IP Cores Without Licensing Encrypting RTL IP Core With Licensing
RTL IP Core Kernel Interfaces x
Kernel Argument Interfaces Memory-Mapped (MM) Agent Kernel Invocation Interface Ready/Valid Handshaking Kernel Invocation Interface Memory-Mapped Host Interfaces Structs in RTL IP Core Interfaces IP core Reset Behavior
Memory-Mapped Host Interfaces x
Memory-Mapped Host Interfaces Using Unified Shared Memory Pointers and the annotated_arg Class Memory-Mapped Host Interfaces Using Accessors
Memory-Mapped Host Interfaces Using Unified Shared Memory Pointers and the annotated_arg Class x
Buffer Locations in Memory-Mapped Host Interfaces The annotated_arg Template Class
Loops x
Refactor the Loop-Carried Data Dependency Relax Loop-Carried Dependency Transfer Loop-Carried Dependency to Local Memory Minimize the Memory Dependencies for Loop Pipelining Unroll Loops Fuse Loops to Reduce Overhead and Improve Performance Optimize Loops With Loop Speculation Remove Loop Bottlenecks Improve fMAX/II with Shannonization Optimize Inner Loop Throughput Improve Loop Performance by Caching Data in On-Chip Memory
Pipes x
Host Pipes Pipes Extension
Host Pipes x
Host Pipe Declaration Host Pipe API Host Pipes RTL Interfaces
Pipes Extension x
Key Properties of a Pipe Accessing Pipes The pipe Class and its Use I/O Pipes Characteristics of Pipes Restrictions of Pipes Guidelines for Designing Pipes The atomic_fence Function and Pipes
I/O Pipes x
Emulate Applications with a Pipe That Reads or Writes to an I/O Pipe
Data Types and Arithmetic Operations x
Optimize Floating-point Operation Minimize the Use of Expensive Functions Variable-Precision Data Type Support
Variable-Precision Data Type Support x
Advantages and Limitations of Variable Precision Data Types Declare and Use the AC Data Types
Declare and Use the AC Data Types x
Declare the ac_int Data Type Declare the ac_fixed Data Type Declare the ac_complex Data Type Declare the ap_float Data Type
Declare the ap_float Data Type x
Conversion Rules for the ap_float Data Type Operations with Explicit Precision Controls Comparison Operators Additional ap_float Functions Additional Data Types Provided by the ap_float.hpp Header File Quality of Results and the ap_float Data Type
Parallelism x
Pipelined Kernels NDRange Kernels Asynchronous Parallelism Within Kernels (task_sequence)
Pipelined Kernels x
Stable Arguments
Asynchronous Parallelism Within Kernels (task_sequence) x
Task Functions task_sequence Use Cases
Memories and Memory Operations x
The device_global Extension (Beta) The annotated_ptr Template Class (Beta) Memory Accesses Kernel Variable Accesses
Memory Accesses x
Load-Store Units Global Memory Accesses Optimization Perform Kernel Computations Using Local or Private Memory Local and Private Memory Accesses Optimization Annotating Unified Shared Memory Pointers Zero-Copy Memory Access Additional Recommendations
Load-Store Units x
Load-Store Unit Styles Load-Store Unit Modifiers Load-Store Unit Controls
Global Memory Accesses Optimization x
Global Memory Bandwidth Use Calculation Manual Partition of Global Memory Partitioning Buffers Across Different Memory Types (Heterogeneous Memory) Partitioning Buffers Across Memory Channels of the Same Memory Type Ignoring Dependencies Between Accessor Arguments Contiguous Memory Accesses Static Memory Coalescing
Libraries x
Use SYCL Shared Library With Third-Party Applications Use of RTL Libraries for FPGA Object Manifest File Syntax of an RTL Library Restrictions and Limitations in RTL Support Agilex 7 and Stratix 10 Design-Specific Reset Requirements for Stall-Free and Stallable RTL Libraries Stall-Free RTL
Additional FPGA Acceleration Flow Considerations x
FPGA-CPU Interaction FPGA Boards and Board Support Packages (BSPs) Targeting Multiple Identical FPGA Devices Targeting Multiple Platforms Split Kernel into Multiple FPGA Images (Linux only)
FPGA Boards and Board Support Packages (BSPs) x
The FPGA Board Utility Commands Managing an FPGA Board Advanced Board Management The OpenCL™ Installable Client Driver (ICD)
Advanced Board Management x
Extracting the FPGA Device Image (.aocx) File from a Multiarchitecture Binary File
FPGA Optimization Flags, Attributes, Pragmas, and Extensions x
Optimization Flags Optimization Targets Kernel Variables Kernel Attributes Memory Attributes Loop Directives Floating-Point Pragmas Latency Controls (Beta)
Optimization Flags x
Specify Schedule fMAX Target for Kernels (-Xsclock=<clock target>) Create a 2xclock Interface (-Xsuse-2xclock) Disable Burst-Interleaving of Global Memory (-Xsno-interleaving) Force Ring Interconnect for Global Memory (-Xsglobal-ring) Force a Single Store Ring to Reduce Area (-Xsforce-single-store-ring) Force Fewer Read Data Reorder Units to Reduce Area (-Xsnum-reorder) Disable Hardware Kernel Invocation Queue (-Xsno-hardware-kernel-invocation-queue) Modify the Handshaking Protocol Between Clusters (-Xshyper-optimized-handshaking) Disable Automatic Fusion of Loops (-Xsdisable-auto-loop-fusion) Fuse Adjacent Loops With Unequal Trip Counts (-Xsenable-unequal-tc-fusion) Pipeline Loops in Non-task Kernels (-Xsauto-pipeline) Control Semantics of Floating-Point Operations (-fp-model=<value>) Modify the Rounding Mode of Floating-point Operations (-Xsrounding=<rounding_type>) Global Control of Exit FIFO Latency of Stall-free Clusters (-Xssfc-exit-fifo-type=<value>) Enable the Read-Only Cache for Read-Only Accessors (-Xsread-only-cache-size=<N>) Control Hardware Implementation of the Supported Data Types and Math Operations (-Xsdsp-mode=<option>) Generate Register Map Wrapper (-Xsregister-map-wrapper-type) Allow Wide Memory Initialization (-Xsallow-wide-device-globals)
Optimization Targets x
Minimum Latency Flow Minimum Area Flow Balanced Throughput-Area Trade-Offs Flow
Kernel Attributes x
Specify Schedule fMAX Target for Kernels (scheduler_target_fmax_mhz) Specify a Workgroup Size (max_work_group_size/reqd_work_group_size) Specify Number of SIMD Work Items (num_simd_work_items) Omit Hardware that Generates and Dispatches Kernel IDs (max_global_work_dim) Omit Hardware that Supports Global Work Offsets (no_global_work_offset) Reduce Kernel Area and Latency (use_stall_enable_clusters)
Loop Directives x
disable_loop_pipelining Attribute initiation_interval Attribute ivdep Attribute loop_coalesce Attribute max_concurrency Attribute max_interleaving Attribute speculated_iterations Attribute unroll Pragma Loop Fuse Functions and nofusion Attribute max_reinvocation_delay Attribute (Beta)
Quick Reference x
Algorithmic C Data Types Floating Point Pragmas FPGA Accessor Properties FPGA Extensions FPGA Kernel Attributes FPGA Local Memory Function Latency Control Properties (Beta) FPGA LSU Controls FPGA Loop Directives FPGA Memory Attributes FPGA Optimization Flags Pipe API
Intel oneAPI DPC++/C++ Compiler Handbook for FPGAs Overview
Introduction To FPGA Design Concepts
Intel oneAPI FPGA Development
Getting Started with the Intel oneAPI DPC++/C++ Compiler for Intel FPGA Development
Defining a Kernel for FPGAs
Debugging and Verifying Your Design
Analyzing Your Design
Optimizing Your Kernel
Optimizing Your Host Application
Integrating Your Kernel into DSP Builder for Intel FPGAs
Integrating Your RTL IP Core Into a System
RTL IP Core Kernel Interfaces
Loops
Pipes
Data Types and Arithmetic Operations
Parallelism
Memories and Memory Operations
Libraries
Additional FPGA Acceleration Flow Considerations
FPGA Optimization Flags, Attributes, Pragmas, and Extensions
Quick Reference
Additional Information
Document Revision History for the Intel oneAPI DPC++/C++ Compiler Handbook for Intel FPGAs
Notices and Disclaimers

Memory Attributes

The following table lists attributes that allow fine-grained control on how you can implement a variable (usually an array) in on-chip memory. The attribute immediately precedes the variable declaration.

FPGA Memory Attributes

Attribute

Syntax

Description

bank_bits

[[intel::bank_bits(b0,b1,...,bn)]]

Specifies that the local memory addresses should use bits (b0,b1,...,bn) for bank selection, where, (b0,b1,...,bn) are indicated in terms of word-addressing and not byte-addressing. As a result, the number of banks is equal to 2<number of bank bits>. The bits of the local memory address not included in (b0,b1,...,bn) are used for word selection in each bank.

bankwidth

[[intel::bankwidth(N)]]

Specifies that the memory system implementing the local variable must have banks that are N bytes wide, where N is a power-of-2 integer value greater than zero.

doublepump

[[intel::doublepump]]

Specifies that the memory system implementing the local variable must operate at twice the clock frequency of the kernel accessing it. This allows twice as many memory accesses per kernel clock cycle but may reduce the maximum kernel clock frequency.

force_pow2_depth

[[intel::force_pow2_depth(N)]]

Specifies that the memory implementing the variable or array has a power-of-2 depth. This attribute is enabled if N is 1, and disabled if N is 0.

max_replicates

[[intel::max_replicates(N)]]

Specifies that the memory implementing the local variable or array has no more than the specified number of replicates to enable simultaneous reads from the datapath.

fpga_memory

[[intel::fpga_memory(<impl_type>)]]

Specifies that the compiler must implement the local variable in a memory system. You may pass an optional string argument to specify the memory implementation type. Specify <impl_type> as either a BLOCK_RAM or MLAB to implement the memory using memory blocks (for example, M20K) or memory logic array blocks (MLABs), respectively.

merge

[[intel::merge(<key>, <direction>)]]

Merges of two or more variables or arrays defined in the same scope in a width-wise or depth-wise manner. All variables with the same key string are merged into the same memory system. The string <direction> can be either width or depth.

numbanks

[[intel::numbanks(N)]]

Specifies that the memory system implementing the local variable must have N banks, where N is a power-of-2 integer value greater than zero.

private_copies

[[intel::private_copies(N)]]

Specifies that the memory has a defined number of copies to allow simultaneous iterations of a loop at any given time.

When you declare an array in the scope of a loop body, the array is private to that iteration of the loop. However, concurrency is limited if all iterations of the loop must share the same physical memory. Specifying private_copies(N) allows N iterations of the loop to execute concurrently, each with its own private copy of the array. A larger value of N may expose more opportunities for parallel execution, at a cost of higher on-chip memory utilization.

private_copies(N) interacts with max_concurrency attribute applied to the loop. For more information, refer to the max_concurrency Attribute and FPGA tutorial sample "Private Copies" on GitHub.

fpga_register

[[intel::fpga_register]]

Specifies that the variable must be carried through the pipeline in registers. The compiler may implement a register variable either exclusively in flip-flops (FFs), or in a combination of FFs and RAM-based FIFOs.

You can also apply this attribute to device_global variables. However, the device_global variables must be used in a single kernel and they must not have any host accesses.

The fpga_register memory attribute is functionally equivalent to the fpga_datapath class template.

RESTRICTION:
You cannot apply this attribute to device_global struct/class member variables. The compiler ignores the fpga_register attribute when it is applied to device_global struct/class member variables.

simple_dual_port

[[intel::simple_dual_port]]

Specifies that the memory implementing the variable or array should have read-only and write-only ports rather than read or write ports. Specifying simple_dual_port forces the compiler to configure the memory's underlying hardware resources in simple dual port mode, which can have area benefits in some corner cases.

singlepump

[[intel::singlepump]]

Specifies that the memory system implementing the local variable must operate at the same clock frequency as the kernel accessing it.

TIP:

For additional information, refer to the FPGA tutorial sample "Memory Attributes" on GitHub.

Struct Data Types and Memory Attributes

You can apply memory attributes to the member variables in a struct variable within the struct declaration. If you also apply memory attributes to the object instantiation of a struct variable, the attributes on the instantiation override the attributes from the declaration.

Consider the following code example where memory attributes are applied to both a declaration and instantiation: 

struct State {
 [[intel::fpga_memory]] int array[100];
 [[intel::fpga_register]] int reg[4];
};

cgh.single_task<class test>([=] {
  struct State S1;
  [[intel::fpga_memory]] struct State S2;
  // some uses
});

In this example code, the compiler splits S1 into two variables, S1.array[100] (implemented in the memory) and S1.reg[4] (implemented in registers). However, the compiler ignores attributes applied at the struct declaration for object S2 and does not split it since the S2 object has the [[intel::fpga_memory]] attribute applied to it.

Parent topic: FPGA Optimization Flags, Attributes, Pragmas, and Extensions
Level Two Title