Visible to Intel only — GUID: vqe1665161358866
Ixiasoft
1. Answers to Top FAQs
2. Network-on-Chip (NoC) Overview
3. Hard Memory NoC in Intel Agilex® 7 M-Series FPGAs
4. NoC Design Flow in Intel® Quartus® Prime Pro Edition
5. NoC Real-time Performance Monitoring
6. Simulating NoC Designs
7. NoC Power Estimation
8. Hard Memory NoC IP Reference
9. Document Revision History of Intel Agilex® 7 M-Series FPGA Network-on-Chip (NoC) User Guide
4.4.1. General NoC IP Connectivity Guidelines
4.4.2. Connectivity Guidelines: NoC Initiators for Fabric AXI4 Managers
4.4.3. Connectivity Guidelines: NoC Targets for Fabric AXI4 Managers
4.4.4. Connectivity Guidelines: NoC Clock Control
4.4.5. Connectivity Guidelines: NoC Initiators for HPS
4.4.6. Connectivity Guidelines: NoC Targets for HPS
6.1. Adding NoC Connectivity and Address Mapping to the Simulation Netlist
6.2. Generating a Simulation Registration Include File (NoC Assignment Editor Connection Flow)
6.3. Generating a Simulation Registration Include File (Platform Designer Connection Flow)
6.4. Contents of Simulation Registration Include File
8.1.2.1. NoC Initiator Intel FPGA IP AXI4/AXI4 Lite Interfaces
8.1.2.2. NoC Initiator AXI4 User Interface Signals
8.1.2.3. NoC Initiator Intel FPGA IP AXI4 Lite User Interface Signals
8.1.2.4. NoC Initiator Intel FPGA IP Clock and Reset Signals
8.1.2.5. NoC Initiator Intel FPGA IP Platform Designer-Only Signals
Visible to Intel only — GUID: vqe1665161358866
Ixiasoft
3.2.1. UIB Segments
UIB segments are NoC segments that interface with the UIB to connect to HBM2e memory. These UIB segments consist of three subsegments, each aligned with an FPGA clock sector. Overall, the UIB segment consists of the following:
- Nine AXI4 initiators on the FPGA fabric side.
- Sixteen AXI4 targets on the UIB side.
- Six AXI4 Lite targets on the UIB side.
- A network of switches that transfer packets laterally along the hard memory NoC and connect to the AXI4 initiators and target.
Figure 3. NoC UIB Segment
Note: There is an additional service network running parallel to the main switch network. This service network connects the NoC SSM to the AXI4 Lite initiators and targets. NoC initiators can send transactions over the main network to the NoC SSM to access the service network for sideband configuration and system monitoring. Figure 3. NoC UIB Segment does not show this network.