Quartus® Prime Pro Edition User Guide: Debug Tools

ID 683819
Date 7/08/2024
Public
Document Table of Contents

4.2.1. Required Components

To perform analysis using the LAI you need the following components:
  • Quartus® Prime software version 15.1 or later
  • The device under test
  • An external logic analyzer
  • An Intel FPGA communications cable
  • A cable to connect the Intel-supported device to the external logic analyzer
Figure 95. LAI and Hardware Setup

Notes to figure:

  1. Configuration and control of the LAI using a computer loaded with the Quartus® Prime software via the JTAG port.
  2. Configuration and control of the LAI using a third-party vendor logic analyzer via unused FPGA pins. Support varies by vendor.