DisplayPort Intel® FPGA IP User Guide

Download PDF
ID 683273
Date 10/16/2023
Public
Document Table of Contents
Document Table of Contents x
1. DisplayPort Intel® FPGA IP Quick Reference 2. About This IP 3. Getting Started 4. DisplayPort Intel® FPGA IP Hardware Design Examples 5. DisplayPort Source 6. DisplayPort Sink 7. DisplayPort Intel® FPGA IP Parameters 8. DisplayPort Intel® FPGA IP Simulation Example 9. DisplayPort API Reference 10. DisplayPort Source Register Map and DPCD Locations 11. DisplayPort Sink Register Map and DPCD Locations 12. DisplayPort Intel® FPGA IP User Guide Archives 13. Document Revision History for the DisplayPort Intel® FPGA IP User Guide
1. DisplayPort Intel® FPGA IP Quick Reference x
1.1. DisplayPort Terms and Acronyms
2. About This IP x
2.1. Release Information 2.2. Device Family Support 2.3. IP Core Verification 2.4. Performance and Resource Utilization
3. Getting Started x
3.1. Installing and Licensing Intel® FPGA IP Cores 3.2. Specifying IP Parameters and Options 3.3. Simulating the Design 3.4. Compiling the Full Design and Programming the FPGA 3.5. Calculating Video Bandwidth and Recovered Pixel Clock Frequency
3.1. Installing and Licensing Intel® FPGA IP Cores x
3.1.1. Intel® FPGA IP Evaluation Mode
3.3. Simulating the Design x
3.3.1. Simulating with the ModelSim Simulator
4. DisplayPort Intel® FPGA IP Hardware Design Examples x
4.1. DisplayPort Intel® FPGA IP Hardware Design Examples for Intel® Arria® 10, Intel® Cyclone® 10 GX, Intel® Stratix® 10, and Intel® Agilex™ 7 F-Tile Devices 4.2. HDCP Over DisplayPort Design Example for Intel® Arria® 10 and Intel® Stratix® 10 Devices 4.3. DisplayPort Intel® FPGA IP Hardware Design Examples for Arria V, Cyclone V, and Stratix V Devices
4.3. DisplayPort Intel® FPGA IP Hardware Design Examples for Arria V, Cyclone V, and Stratix V Devices x
4.3.1. Clock Recovery Core 4.3.2. Transceiver and Clocking 4.3.3. Required Hardware 4.3.4. Design Walkthrough 4.3.5. DisplayPort Link Training Flow 4.3.6. DisplayPort Post Link Training Adjust Request Flow (LQA) 4.3.7. Translating DisplayPort Link Training AUX Transactions 4.3.8. DisplayPort MST Source User Application
4.3.1. Clock Recovery Core x
4.3.1.1. Clock Recovery Core Parameters 4.3.1.2. Clock Recovery Interface
4.3.1.2. Clock Recovery Interface x
4.3.1.2.1. Video Input Port
4.3.4. Design Walkthrough x
4.3.4.1. Set Up the Hardware 4.3.4.2. Copy the Design Files to Your Working Directory 4.3.4.3. Build the FPGA Design 4.3.4.4. Load and Run the Software 4.3.4.5. View the Results
5. DisplayPort Source x
5.1. IP to Transceiver Parallel Data Interface Width 5.2. Main Data Path 5.3. Controller Interface 5.4. Sideband Channel 5.5. Source Embedded DisplayPort (eDP) Support 5.6. HDCP 1.3 TX Architecture 5.7. HDCP 2.3 TX Architecture 5.8. Source Interfaces 5.9. Source Clock Tree
5.2. Main Data Path x
5.2.1. Video Packetizer Path 5.2.2. Video Geometry Measurement Path 5.2.3. Audio and Secondary Stream Encoder Path 5.2.4. Training and Link Quality Patterns Generator
5.2.4. Training and Link Quality Patterns Generator x
5.2.4.1. DP1.4 (8B/10B Channel Coding) 5.2.4.2. DP2.0 (128B/132B Channel Coding)
5.8. Source Interfaces x
5.8.1. Controller Interface 5.8.2. AUX Interface 5.8.3. Video Interface 5.8.4. TX Transceiver Interface 5.8.5. Transceiver Reconfiguration Interface 5.8.6. Transceiver Analog Reconfiguration Interface 5.8.7. Secondary Stream Interface 5.8.8. Audio Interface
5.8.3. Video Interface x
5.8.3.1. Video Interface (TX Video IM Enable = 0) 5.8.3.2. Video Interface (TX Video IM Enable = 1) 5.8.3.3. Video Interface (Enable Active Video Data Protocols = AXIS-VVP Full)
6. DisplayPort Sink x
6.1. Transceiver to IP Parallel Data Interface Width 6.2. Sink Embedded DisplayPort (eDP) Support 6.3. Sink Non-GPU Mode Support 6.4. HDCP 1.3 RX Architecture 6.5. HDCP 2.3 RX Architecture 6.6. Sink Interfaces 6.7. Sink Clock Tree
6.6. Sink Interfaces x
6.6.1. Controller Interface 6.6.2. AUX Interface 6.6.3. Debugging Interface 6.6.4. Video Interface 6.6.5. Video Interface (Enable Active Video Data Protocols = AXIS-VVP Full) 6.6.6. Clocked Video Input Interface 6.6.7. RX Transceiver Interface 6.6.8. Transceiver Reconfiguration Interface 6.6.9. Secondary Stream Interface 6.6.10. Audio Interface 6.6.11. Non-GPU Mode EDID Interface 6.6.12. MSA Interface
6.6.2. AUX Interface x
6.6.2.1. AUX Debug Interface 6.6.2.2. EDID Interface
6.6.3. Debugging Interface x
6.6.3.1. Link Parameters Interface 6.6.3.2. Video Stream Out Interface
7. DisplayPort Intel® FPGA IP Parameters x
7.1. DisplayPort Intel® FPGA IP Source Parameters 7.2. DisplayPort Intel® FPGA IP Sink Parameters
8. DisplayPort Intel® FPGA IP Simulation Example x
8.1. Design Walkthrough
8.1. Design Walkthrough x
8.1.1. Copy the Simulation Files to Your Working Directory 8.1.2. Generate the IP Simulation Files and Scripts, and Compile and Simulate 8.1.3. View the Results
9. DisplayPort API Reference x
9.1. Using the Library 9.2. btc_dprx_syslib API Reference 9.3. btc_dprx_aux_get_request 9.4. btc_dprx_aux_handler 9.5. btc_dprx_aux_post_reply 9.6. btc_dprx_baseaddr 9.7. btc_dprx_dpcd_gpu_access 9.8. btc_dprx_edid_set 9.9. btc_dprx_hpd_get 9.10. btc_dprx_hpd_pulse 9.11. btc_dprx_hpd_set 9.12. btc_dprx_lt_eyeq_init 9.13. btc_dprx_lt_force 9.14. btc_dprx_rtl_ver 9.15. btc_dprx_sw_ver 9.16. btc_dprx_syslib_add_rx 9.17. btc_dprx_syslib_info 9.18. btc_dprx_syslib_init 9.19. btc_dprx_syslib_monitor 9.20. btc_dprx_mst_link_addr_rep_set 9.21. btc_dprx_mst_conn_stat_notify_req 9.22. btc_dprx_mst_conn_stat_notify_rep 9.23. btc_dptx_syslib API Reference 9.24. btc_dptx_aux_i2c_read 9.25. btc_dptx_aux_i2c_write 9.26. btc_dptx_aux_read 9.27. btc_dptx_aux_write 9.28. btc_dptx_baseaddr 9.29. btc_dptx_edid_block_read 9.30. btc_dptx_edid_read 9.31. btc_dptx_fast_link_training 9.32. btc_dptx_hpd_change 9.33. btc_dptx_is_link_up 9.34. btc_dptx_link_bw 9.35. btc_dptx_link_training 9.36. btc_dptx_rtl_ver 9.37. btc_dptx_set_color_space 9.38. btc_dptx_sw_ver 9.39. btc_dptx_syslib_add_tx 9.40. btc_dptx_syslib_init 9.41. btc_dptx_syslib_monitor 9.42. btc_dptx_test_autom 9.43. btc_dptx_video_enable 9.44. btc_dptx_mst_allocate_payload_rep 9.45. btc_dptx_mst_allocate_payload_req 9.46. btc_dptx_mst_clear_payload_table_rep 9.47. btc_dptx_mst_clear_payload_table_req 9.48. btc_dptx_mst_conn_stat_notify_req 9.49. btc_dptx_mst_down_rep_irq 9.50. btc_dptx_mst_enable 9.51. btc_dptx_mst_enum_path_rep 9.52. btc_dptx_mst_enum_path_req 9.53. btc_dptx_mst_get_msg_transact_ver_rep 9.54. btc_dptx_mst_get_msg_transact_ver_req 9.55. btc_dptx_mst_link_address_rep 9.56. btc_dptx_mst_link_address_req 9.57. btc_dptx_mst_remote_dpcd_wr_rep 9.58. btc_dptx_mst_remote_dpcd_wr_req 9.59. btc_dptx_mst_remote_i2c_rd_rep 9.60. btc_dptx_mst_remote_i2c_rd_req 9.61. btc_dptx_mst_set_color_space 9.62. btc_dptx_mst_tavgts_set 9.63. btc_dptx_mst_up_req_irq 9.64. btc_dptx_mst_vcpid_set 9.65. btc_dptx_mst_vcptab_addvc 9.66. btc_dptx_mst_vcptab_clear 9.67. btc_dptx_mst_vcptab_delvc 9.68. btc_dptx_mst_vcptab_update 9.69. btc_dptxll_syslib API Reference 9.70. btc_dptxll_hpd_change 9.71. btc_dptxll_hpd_irq 9.72. btc_dptxll_mst_cmp_ports 9.73. btc_dptxll_mst_edid_read_rep 9.74. btc_dptxll_mst_edid_read_req 9.75. btc_dptxll_mst_get_device_ports 9.76. btc_dptxll_mst_set_csn_callback 9.77. btc_dptxll_mst_topology_discover 9.78. btc_dptxll_stream_allocate_rep 9.79. btc_dptxll_stream_allocate_req 9.80. btc_dptxll_stream_calc_VCP_size 9.81. btc_dptxll_stream_delete_rep 9.82. btc_dptxll_stream_delete_req 9.83. btc_dptxll_stream_get 9.84. btc_dptxll_stream_set_color_space 9.85. btc_dptxll_stream_set_pixel_rate 9.86. btc_dptxll_sw_ver 9.87. btc_dptxll_syslib_add_tx 9.88. btc_dptxll_syslib_init 9.89. btc_dptxll_syslib_monitor 9.90. btc_dpxx_syslib Additional Types 9.91. btc_dprx_syslib Supported DPCD Locations
10. DisplayPort Source Register Map and DPCD Locations x
10.1. Source General Registers 10.2. Source MSA Registers 10.3. Source Link PHY Control and Status 10.4. Source Timestamp 10.5. Source CRC Registers 10.6. Source Audio Registers 10.7. Source MST Registers 10.8. Source AUX Controller Interface 10.9. Source-Supported DPCD Locations 10.10. Source AXI2CV Registers
10.1. Source General Registers x
10.1.1. DPTX_TX_CONTROL 10.1.2. DPTX_TX_STATUS 10.1.3. DPTX_TX_VERSION
10.2. Source MSA Registers x
10.2.1. DPTX0_MSA_MVID 10.2.2. DPTX0_MSA_NVID 10.2.3. DPTX0_MSA_HTOTAL 10.2.4. DPTX0_MSA_VTOTAL 10.2.5. DPTX0_MSA_HSP 10.2.6. DPTX0_MSA_HSW 10.2.7. DPTX0_MSA_HSTART 10.2.8. DPTX0_MSA_VSTART 10.2.9. DPTX0_MSA_VSP 10.2.10. DPTX0_MSA_VSW 10.2.11. DPTX0_MSA_HWIDTH 10.2.12. DPTX0_MSA_VHEIGHT 10.2.13. DPTX0_MSA_MISC0 10.2.14. DPTX0_MSA_MISC1 10.2.15. DPTX0_MSA_COLOR 10.2.16. DPTX0_VBID
10.3. Source Link PHY Control and Status x
10.3.1. DPTX_PRE_VOLT0/DPTX_REG_TXFFE0 10.3.2. DPTX_PRE_VOLT1/DPTX_REG_TXFFE1 10.3.3. DPTX_PRE_VOLT2/DPTX_REG_TXFFE2 10.3.4. DPTX_PRE_VOLT3/DPTX_REG_TXFFE3 10.3.5. DPTX_RECONFIG 10.3.6. DPTX_TEST_80BIT_PATTERN1/DPTX_TEST_264BIT_PATTERN1 10.3.7. DPTX_TEST_80BIT_PATTERN2/DPTX_TEST_264BIT_PATTERN2 10.3.8. DPTX_TEST_80BIT_PATTERN3/DPTX_TEST_264BIT_PATTERN3 10.3.9. DPTX_TEST_264BIT_PATTERN4 10.3.10. DPTX_TEST_264BIT_PATTERN5 10.3.11. DPTX_TEST_264BIT_PATTERN6 10.3.12. DPTX_TEST_264BIT_PATTERN7 10.3.13. DPTX_TEST_264BIT_PATTERN8 10.3.14. DPTX_TEST_264BIT_PATTERN9
10.7. Source MST Registers x
10.7.1. DPTX_MST_VCPTAB0 10.7.2. DPTX_MST_VCPTAB1 10.7.3. DPTX_MST_VCPTAB2 10.7.4. DPTX_MST_VCPTAB3 10.7.5. DPTX_MST_VCPTAB4 10.7.6. DPTX_MST_VCPTAB5 10.7.7. DPTX_MST_VCPTAB6 10.7.8. DPTX_MST_VCPTAB7 10.7.9. DPTX_MST_TAVG_TS 10.7.10. DPTX_MST_ECF0 10.7.11. DPTX_MST_ECF1
10.8. Source AUX Controller Interface x
10.8.1. DPTX_AUX_CONTROL 10.8.2. DPTX_AUX_COMMAND 10.8.3. DPTX_AUX_BYTE0 10.8.4. DPTX_AUX_BYTE1 10.8.5. DPTX_AUX_BYTE2 10.8.6. DPTX_AUX_BYTE3 10.8.7. DPTX_AUX_BYTE4 10.8.8. DPTX_AUX_BYTE5 10.8.9. DPTX_AUX_BYTE6 10.8.10. DPTX_AUX_BYTE7 10.8.11. DPTX_AUX_BYTE8 10.8.12. DPTX_AUX_BYTE9 10.8.13. DPTX_AUX_BYTE10 10.8.14. DPTX_AUX_BYTE11 10.8.15. DPTX_AUX_BYTE12 10.8.16. DPTX_AUX_BYTE13 10.8.17. DPTX_AUX_BYTE14 10.8.18. DPTX_AUX_BYTE15 10.8.19. DPTX_AUX_BYTE16 10.8.20. DPTX_AUX_BYTE17 10.8.21. DPTX_AUX_BYTE18 10.8.22. DPTX_AUX_RESET
10.10. Source AXI2CV Registers x
10.10.1. Source AXI2CV Registers Summary 10.10.2. Source AXI2CV Registers Description
10.10.2. Source AXI2CV Registers Description x
10.10.2.1. STATUS (0x50) 10.10.2.2. VIDEO_MODE_MATCH (0X51) 10.10.2.3. VIDEO_MODE_BANK_SELECT (0x53) 10.10.2.4. VIDEO_MODE_CONTROL (0x54) 10.10.2.5. VIDEO_MODE_SAMPLE_COUNT(0x55) 10.10.2.6. VIDEO_MODE_F0_LINE_COUNT (0x56) 10.10.2.7. VIDEO_MODE_F1_LINE_COUNT (0x57) 10.10.2.8. VIDEO_MODE_HORIZONTAL_FRONT_PORCH (0x58) 10.10.2.9. VIDEO_MODE_HORIZONTAL_SYNC_LENGTH (0x59) 10.10.2.10. VIDEO_MODE_HORIZONTAL_BLANKING (0x5A) 10.10.2.11. VIDEO_MODE_VERTICAL_FRONT_PORCH (0x5B) 10.10.2.12. VIDEO_MODE_VERTICAL_SYNC_LENGTH (0x5C) 10.10.2.13. VIDEO_MODE_VERTICAL_BLANKING (0x5D) 10.10.2.14. VIDEO_MODE_F0_VERTICAL_FRONT_PORCH (0x5E) 10.10.2.15. VIDEO_MODE_F0_VERTICAL_SYNC_LENGTH (0x5F) 10.10.2.16. VIDEO_MODE_F0_VERTICAL_BLANKING (0x60) 10.10.2.17. VIDEO_MODE_ACTIVE_PICTURE_LINE (0x61) 10.10.2.18. VIDEO_MODE_F0_VERTICAL_RISING (0x62) 10.10.2.19. VIDEO_MODE_FIELD_RISING (0x63) 10.10.2.20. VIDEO_MODE_FIELD_FALLING (0x64) 10.10.2.21. VIDEO_MODE_VALID (0x6D)
11. DisplayPort Sink Register Map and DPCD Locations x
11.1. Sink General Registers 11.2. Sink Timestamp 11.3. Sink Bit-Error Counters 11.4. FEC Registers 11.5. 128B/132B Link Quality Test Pattern Registers 11.6. Sink MSA Registers 11.7. Sink Audio Registers 11.8. Sink MST Registers 11.9. Sink AUX Controller Interface 11.10. Sink CRC Registers 11.11. Sink-Supported DPCD Locations 11.12. Sink CV2AXI Registers
11.1. Sink General Registers x
11.1.1. DPRX_RX_CONTROL 11.1.2. DPRX_RX_STATUS 11.1.3. DPRX_BER_CONTROL 11.1.4. DPRX_BER_CNT0 11.1.5. DPRX_BER_CNT1
11.3. Sink Bit-Error Counters x
11.3.1. DPRX_BER_CNTI0 11.3.2. DPRX_BER_CNTI1
11.4. FEC Registers x
11.4.1. DPRX_FEC_CONFIG 11.4.2. DPRX_FEC_ERROR_COUNT
11.5. 128B/132B Link Quality Test Pattern Registers x
11.5.1. DPRX_BER_TEST_PATTERN
11.6. Sink MSA Registers x
11.6.1. DPRX0_MSA_MVID 11.6.2. DPRX0_MSA_NVID 11.6.3. DPRX0_MSA_HTOTAL 11.6.4. DPRX0_MSA_VTOTAL 11.6.5. DPRX0_MSA_HSP 11.6.6. DPRX0_MSA_HSW 11.6.7. DPRX0_MSA_HSTART 11.6.8. DPRX0_MSA_VSTART 11.6.9. DPRX0_MSA_VSP 11.6.10. DPRX0_MSA_VSW 11.6.11. DPRX0_MSA_HWIDTH 11.6.12. DPRX0_MSA_VHEIGHT 11.6.13. DPRX0_MSA_MISC0 11.6.14. DPRX0_MSA_MISC1 11.6.15. DPRX0_MSA_COLOR 11.6.16. DPRX0_VBID
11.7. Sink Audio Registers x
11.7.1. DPRX0_AUD_MAUD 11.7.2. DPRX0_AUD_NAUD 11.7.3. DPRX0_AUD_AIF0 11.7.4. DPRX0_AUD_AIF1 11.7.5. DPRX0_AUD_AIF2 11.7.6. DPRX0_AUD_AIF3 11.7.7. DPRX0_AUD_AIF4
11.8. Sink MST Registers x
11.8.1. DPRX_MST_VCPTAB0 11.8.2. DPRX_MST_VCPTAB1 11.8.3. DPRX_MST_VCPTAB2 11.8.4. DPRX_MST_VCPTAB3 11.8.5. DPRX_MST_VCPTAB4 11.8.6. DPRX_MST_VCPTAB5 11.8.7. DPRX_MST_VCPTAB6 11.8.8. DPRX_MST_VCPTAB7
11.9. Sink AUX Controller Interface x
11.9.1. DPRX_AUX_CONTROL 11.9.2. DPRX_AUX_STATUS 11.9.3. DPRX_AUX_COMMAND 11.9.4. DPRX_AUX_BYTE0 11.9.5. DPRX_AUX_BYTE1 11.9.6. DPRX_AUX_BYTE2 11.9.7. DPRX_AUX_BYTE3 11.9.8. DPRX_AUX_BYTE4 11.9.9. DPRX_AUX_BYTE5 11.9.10. DPRX_AUX_BYTE6 11.9.11. DPRX_AUX_BYTE7 11.9.12. DPRX_AUX_BYTE8 11.9.13. DPRX_AUX_BYTE9 11.9.14. DPRX_AUX_BYTE10 11.9.15. DPRX_AUX_BYTE11 11.9.16. DPRX_AUX_BYTE12 11.9.17. DPRX_AUX_BYTE13 11.9.18. DPRX_AUX_BYTE14 11.9.19. DPRX_AUX_BYTE15 11.9.20. DPRX_AUX_BYTE16 11.9.21. DPRX_AUX_BYTE17 11.9.22. DPRX_AUX_BYTE18 11.9.23. DPRX_AUX_I2C0 11.9.24. DPRX_AUX_I2C1 11.9.25. DPRX_AUX_RESET 11.9.26. DPRX_AUX_HPD
11.12. Sink CV2AXI Registers x
11.12.1. Sink CV2AXI Registers Summary 11.12.2. Sink CV2AXI Registers Description
11.12.2. Sink CV2AXI Registers Description x
11.12.2.1. STATUS (0x50) 11.12.2.2. ACTIVE SAMPLE COUNT (0x52) 11.12.2.3. F0_ACTIVE_LINE_COUNT (0x53) 11.12.2.4. F1_ACTIVE_LINE_COUNT (0x54) 11.12.2.5. TOTAL_SAMPLE_COUNT (0x55) 11.12.2.6. F0_TOTAL_LINE_COUNT (0x56) 11.12.2.7. F1_TOTAL_LINE_COUNT (0x57) 11.12.2.8. COLOR_PATTERN (0x5C) 11.12.2.9. CONTROL (0x64)
1. DisplayPort Intel® FPGA IP Quick Reference
2. About This IP
3. Getting Started
4. DisplayPort Intel® FPGA IP Hardware Design Examples
5. DisplayPort Source
6. DisplayPort Sink
7. DisplayPort Intel® FPGA IP Parameters
8. DisplayPort Intel® FPGA IP Simulation Example
9. DisplayPort API Reference
10. DisplayPort Source Register Map and DPCD Locations
11. DisplayPort Sink Register Map and DPCD Locations
12. DisplayPort Intel® FPGA IP User Guide Archives
13. Document Revision History for the DisplayPort Intel® FPGA IP User Guide

7.2. DisplayPort Intel® FPGA IP Sink Parameters

You set parameters for the sink using the DisplayPort Intel® FPGA IP parameter editor.

Table 59.  Sink Parameters
Parameter Description
Device family Select the targeted device family: Intel® Agilex™ 7, Intel® Stratix® 10, Intel® Arria® 10, Intel® Cyclone® 10 GX, Arria V GX, Arria V GZ, Cyclone V, or Stratix V.
Support DisplayPort sink Turn on to enable DisplayPort sink.
Maximum video output color depth Determines the maximum video input color depth (bits per color) supported by the DisplayPort source. Select 6, 8, 10, 12 or 16 bpc. DisplayPort sink supports RGB, YCbCr 4:4:4, YCbCr 4:2:2, and YCbCr 4:2:0 video formats by default.
RX maximum link rate Select the maximum link rate supported: 20 Gbps, 10 Gbps, 8.1 Gbps, 5.4 Gbps, 2.7 Gbps, or 1.62 Gbps.
Note: Cyclone V devices only support up to 2.7 Gbps. 8.10 Gbps is only available in quad symbols per clock for Intel® Arria® 10, Intel® Cyclone® 10 GX, Intel® Stratix® 10, and Intel® Agilex™ 7 devices.
Note: UHBR rates can only be supported in Intel® Stratix® 10 and Intel® Agilex™ 7 F-Tile devices.
Maximum lane count Select the maximum lanes supported: 1, 2, or 4.
Note: If you turn on the Support MST parameter, the maximum lane count is fixed to 4 lanes.
Symbol input mode

Determines the RX transceiver data width in symbols per clock. Select dual (20 bits) or quad (40 bits).

Dual symbol mode saves logic resource but requires the core to run at twice the clock frequency of quad symbol mode. If timing closure is a problem in the device, you should consider using quad symbol mode.

Note: For 8.1 Gbps and above, this option is limited to Quad (40 bits).
Pixel output mode Select the number of pixels per clock (single, dual, or quad symbol).
  • If you select dual pixels per clock, the pixel clock is ½ of the full rate clock and the video port becomes two times wider.
  • If you select four pixels per clock, the pixel clock is ¼ of the full rate clock and the video port becomes four times wider.
Enable Active Video Data Protocols Select the following options to configure the type of Video Interface:
  • None
  • AXIS-VVP Full
Note:
Sink scrambler seed value Select the initial seed value for the scrambler block.
  • DP: 16’hFFFF
  • eDP: 16’hFFFE
Note: All DP2.0 link rates limit this to 16’hFFFF.
Export MSA Turn on to enable the sink to export the MSA interface to the top-level port interface.
IEEE OUI Specify an IEEE organizationally unique identifier (OUI) as part of the DPCD registers.
Enable GPU control Turn on to use an embedded controller to control the sink.
Note: All DP2.0 link rates will require Enable GPU control to be set.
Enable AUX debug stream Turn on to enable AUX traffic output to an Avalon-ST port.
Support CTS test automation Turn on to support automated test features.
Support PRBS Checker DP2.0 only. Supports PRBS* error checking during Link Quality Test Mode.
Support GTC The Global Time Code (GTC) feature is not available. However, if you want to use this feature, contact your nearest Intel FPGA sales representative or file a Service Request.
Support secondary data channel Turn on to enable secondary data.
Support audio data channel Turn on to enable audio packet decoding.
Note: To use this parameter, you must also turn on Support secondary data channel.
Number of audio data channels Select the number of audio channels (2 or 8).
Support MST

Turn on to enable multi-stream support.

You must turn on Enable GPU control to support MST mode.
Note: For multi-stream support, the maximum lane count is fixed to four lanes.
Note: In DP2.0, turn on to enable multiple streams support and set the max stream count accordingly.
Max stream count Specify the maximum amount of streams supported: 2, 3, or 4.
Note: To use this parameter, you must turn on the Support MST parameter.
Support HDCP 1.3 Turn on to enable HDCP 1.3 RX support. This parameter can only be used when you specify these settings:
  • Maximum lane count: 4
  • Symbol input mode: Dual (20 bits) or Quad (40 bits)
  • Enable GPU control: On
Note: The HDCP-related parameters are not included in the Intel® Quartus® Prime Pro Edition software. To access the HDCP feature, contact Intel at https://www.intel.com/content/www/us/en/broadcast/products/programmable/applications/connectivity-solutions.html .
Support HDCP 2.3 Turn on to enable HDCP 2.3 RX support. This parameter can only be used when you specify these settings:
  • Maximum lane count: 4
  • Symbol input mode: Dual (20 bits) or Quad (40 bits)
  • Enable GPU control: On
Note: The HDCP-related parameters are not included in the Intel® Quartus® Prime Pro Edition software. To access the HDCP feature, contact Intel at https://www.intel.com/content/www/us/en/broadcast/products/programmable/applications/connectivity-solutions.html .
Support HDCP Key Management Turn on to enable HDCP key management support. To use this parameter, you must turn on the Support HDCP 1.3 or Support HDCP 2.3 parameters.
Note:
  1. The HDCP-related parameters are not included in the Intel® Quartus® Prime Pro Edition software. To access the HDCP feature, contact Intel at https://www.intel.com/content/www/us/en/broadcast/products/programmable/applications/connectivity-solutions.html .
  2. The HDCP key management support from version 21.3 onwards is not compatible with the KEYENC version 21.2 and earlier. You need to re-encrypt the HDCP production keys using the KEYENC version 21.3 onwards. Refer to DisplayPort Intel Arria 10 FPGA IP Design Example User Guide and DisplayPort Intel Stratix 10 FPGA IP Design Example User Guide for more details.
Related Information
Level Two Title