DisplayPort Intel® FPGA IP User Guide

ID 683273
Date 10/16/2023
Public
Document Table of Contents

6.6.7. RX Transceiver Interface

The transceiver or Native PHY IP core instance is no longer instantiated within the DisplayPort Intel® FPGA IP. The DisplayPort Intel® FPGA IP uses a soft 8B/10B decoder for DP1.4. This interface receives RX transceiver recovered data (rx_parallel_data) in either dual symbol (20-bit) or quad symbol (40-bit) mode in DP1.4. The DisplayPort Intel® FPGA IP drives the digital reset (rx_digitalreset), analog reset (rx_analogreset), and controls the CDR circuitry locking mode.

When 128B/132B channel coding is used, the 32-bit or 64-bit symbols (per lane) is muxed to the 40-bit wide interface (rx_parallel_data) from the transceiver. The transceiver then needs to be dynamically reconfigured between 32-bit or 64-bit PMA width (128B/132B channel coding) and 40-bit PMA width (8B/10B channel coding). Disable Enable Simplified Data Interface to expose a static width (rx_parallel_data) port.

The tables below show the DP IP parallel mapping to Transceiver Parallel Data between 8b10b and 128b132b channel coding:

Figure 39. DPRX IP Parallel Data Mapping to 40 bits PMA width Receiver Transceiver Parallel Data
Figure 40. DPRX IP Parallel Data Mapping to 64 bits PMA width Receiver Transceiver Parallel Data