DisplayPort Intel® FPGA IP User Guide

Download PDF
ID 683273
Date 10/16/2023
Public
Document Table of Contents
Document Table of Contents x
1. DisplayPort Intel® FPGA IP Quick Reference 2. About This IP 3. Getting Started 4. DisplayPort Intel® FPGA IP Hardware Design Examples 5. DisplayPort Source 6. DisplayPort Sink 7. DisplayPort Intel® FPGA IP Parameters 8. DisplayPort Intel® FPGA IP Simulation Example 9. DisplayPort API Reference 10. DisplayPort Source Register Map and DPCD Locations 11. DisplayPort Sink Register Map and DPCD Locations 12. DisplayPort Intel® FPGA IP User Guide Archives 13. Document Revision History for the DisplayPort Intel® FPGA IP User Guide
1. DisplayPort Intel® FPGA IP Quick Reference x
1.1. DisplayPort Terms and Acronyms
2. About This IP x
2.1. Release Information 2.2. Device Family Support 2.3. IP Core Verification 2.4. Performance and Resource Utilization
3. Getting Started x
3.1. Installing and Licensing Intel® FPGA IP Cores 3.2. Specifying IP Parameters and Options 3.3. Simulating the Design 3.4. Compiling the Full Design and Programming the FPGA 3.5. Calculating Video Bandwidth and Recovered Pixel Clock Frequency
3.1. Installing and Licensing Intel® FPGA IP Cores x
3.1.1. Intel® FPGA IP Evaluation Mode
3.3. Simulating the Design x
3.3.1. Simulating with the ModelSim Simulator
4. DisplayPort Intel® FPGA IP Hardware Design Examples x
4.1. DisplayPort Intel® FPGA IP Hardware Design Examples for Intel® Arria® 10, Intel® Cyclone® 10 GX, Intel® Stratix® 10, and Intel® Agilex™ 7 F-Tile Devices 4.2. HDCP Over DisplayPort Design Example for Intel® Arria® 10 and Intel® Stratix® 10 Devices 4.3. DisplayPort Intel® FPGA IP Hardware Design Examples for Arria V, Cyclone V, and Stratix V Devices
4.3. DisplayPort Intel® FPGA IP Hardware Design Examples for Arria V, Cyclone V, and Stratix V Devices x
4.3.1. Clock Recovery Core 4.3.2. Transceiver and Clocking 4.3.3. Required Hardware 4.3.4. Design Walkthrough 4.3.5. DisplayPort Link Training Flow 4.3.6. DisplayPort Post Link Training Adjust Request Flow (LQA) 4.3.7. Translating DisplayPort Link Training AUX Transactions 4.3.8. DisplayPort MST Source User Application
4.3.1. Clock Recovery Core x
4.3.1.1. Clock Recovery Core Parameters 4.3.1.2. Clock Recovery Interface
4.3.1.2. Clock Recovery Interface x
4.3.1.2.1. Video Input Port
4.3.4. Design Walkthrough x
4.3.4.1. Set Up the Hardware 4.3.4.2. Copy the Design Files to Your Working Directory 4.3.4.3. Build the FPGA Design 4.3.4.4. Load and Run the Software 4.3.4.5. View the Results
5. DisplayPort Source x
5.1. IP to Transceiver Parallel Data Interface Width 5.2. Main Data Path 5.3. Controller Interface 5.4. Sideband Channel 5.5. Source Embedded DisplayPort (eDP) Support 5.6. HDCP 1.3 TX Architecture 5.7. HDCP 2.3 TX Architecture 5.8. Source Interfaces 5.9. Source Clock Tree
5.2. Main Data Path x
5.2.1. Video Packetizer Path 5.2.2. Video Geometry Measurement Path 5.2.3. Audio and Secondary Stream Encoder Path 5.2.4. Training and Link Quality Patterns Generator
5.2.4. Training and Link Quality Patterns Generator x
5.2.4.1. DP1.4 (8B/10B Channel Coding) 5.2.4.2. DP2.0 (128B/132B Channel Coding)
5.8. Source Interfaces x
5.8.1. Controller Interface 5.8.2. AUX Interface 5.8.3. Video Interface 5.8.4. TX Transceiver Interface 5.8.5. Transceiver Reconfiguration Interface 5.8.6. Transceiver Analog Reconfiguration Interface 5.8.7. Secondary Stream Interface 5.8.8. Audio Interface
5.8.3. Video Interface x
5.8.3.1. Video Interface (TX Video IM Enable = 0) 5.8.3.2. Video Interface (TX Video IM Enable = 1) 5.8.3.3. Video Interface (Enable Active Video Data Protocols = AXIS-VVP Full)
6. DisplayPort Sink x
6.1. Transceiver to IP Parallel Data Interface Width 6.2. Sink Embedded DisplayPort (eDP) Support 6.3. Sink Non-GPU Mode Support 6.4. HDCP 1.3 RX Architecture 6.5. HDCP 2.3 RX Architecture 6.6. Sink Interfaces 6.7. Sink Clock Tree
6.6. Sink Interfaces x
6.6.1. Controller Interface 6.6.2. AUX Interface 6.6.3. Debugging Interface 6.6.4. Video Interface 6.6.5. Video Interface (Enable Active Video Data Protocols = AXIS-VVP Full) 6.6.6. Clocked Video Input Interface 6.6.7. RX Transceiver Interface 6.6.8. Transceiver Reconfiguration Interface 6.6.9. Secondary Stream Interface 6.6.10. Audio Interface 6.6.11. Non-GPU Mode EDID Interface 6.6.12. MSA Interface
6.6.2. AUX Interface x
6.6.2.1. AUX Debug Interface 6.6.2.2. EDID Interface
6.6.3. Debugging Interface x
6.6.3.1. Link Parameters Interface 6.6.3.2. Video Stream Out Interface
7. DisplayPort Intel® FPGA IP Parameters x
7.1. DisplayPort Intel® FPGA IP Source Parameters 7.2. DisplayPort Intel® FPGA IP Sink Parameters
8. DisplayPort Intel® FPGA IP Simulation Example x
8.1. Design Walkthrough
8.1. Design Walkthrough x
8.1.1. Copy the Simulation Files to Your Working Directory 8.1.2. Generate the IP Simulation Files and Scripts, and Compile and Simulate 8.1.3. View the Results
9. DisplayPort API Reference x
9.1. Using the Library 9.2. btc_dprx_syslib API Reference 9.3. btc_dprx_aux_get_request 9.4. btc_dprx_aux_handler 9.5. btc_dprx_aux_post_reply 9.6. btc_dprx_baseaddr 9.7. btc_dprx_dpcd_gpu_access 9.8. btc_dprx_edid_set 9.9. btc_dprx_hpd_get 9.10. btc_dprx_hpd_pulse 9.11. btc_dprx_hpd_set 9.12. btc_dprx_lt_eyeq_init 9.13. btc_dprx_lt_force 9.14. btc_dprx_rtl_ver 9.15. btc_dprx_sw_ver 9.16. btc_dprx_syslib_add_rx 9.17. btc_dprx_syslib_info 9.18. btc_dprx_syslib_init 9.19. btc_dprx_syslib_monitor 9.20. btc_dprx_mst_link_addr_rep_set 9.21. btc_dprx_mst_conn_stat_notify_req 9.22. btc_dprx_mst_conn_stat_notify_rep 9.23. btc_dptx_syslib API Reference 9.24. btc_dptx_aux_i2c_read 9.25. btc_dptx_aux_i2c_write 9.26. btc_dptx_aux_read 9.27. btc_dptx_aux_write 9.28. btc_dptx_baseaddr 9.29. btc_dptx_edid_block_read 9.30. btc_dptx_edid_read 9.31. btc_dptx_fast_link_training 9.32. btc_dptx_hpd_change 9.33. btc_dptx_is_link_up 9.34. btc_dptx_link_bw 9.35. btc_dptx_link_training 9.36. btc_dptx_rtl_ver 9.37. btc_dptx_set_color_space 9.38. btc_dptx_sw_ver 9.39. btc_dptx_syslib_add_tx 9.40. btc_dptx_syslib_init 9.41. btc_dptx_syslib_monitor 9.42. btc_dptx_test_autom 9.43. btc_dptx_video_enable 9.44. btc_dptx_mst_allocate_payload_rep 9.45. btc_dptx_mst_allocate_payload_req 9.46. btc_dptx_mst_clear_payload_table_rep 9.47. btc_dptx_mst_clear_payload_table_req 9.48. btc_dptx_mst_conn_stat_notify_req 9.49. btc_dptx_mst_down_rep_irq 9.50. btc_dptx_mst_enable 9.51. btc_dptx_mst_enum_path_rep 9.52. btc_dptx_mst_enum_path_req 9.53. btc_dptx_mst_get_msg_transact_ver_rep 9.54. btc_dptx_mst_get_msg_transact_ver_req 9.55. btc_dptx_mst_link_address_rep 9.56. btc_dptx_mst_link_address_req 9.57. btc_dptx_mst_remote_dpcd_wr_rep 9.58. btc_dptx_mst_remote_dpcd_wr_req 9.59. btc_dptx_mst_remote_i2c_rd_rep 9.60. btc_dptx_mst_remote_i2c_rd_req 9.61. btc_dptx_mst_set_color_space 9.62. btc_dptx_mst_tavgts_set 9.63. btc_dptx_mst_up_req_irq 9.64. btc_dptx_mst_vcpid_set 9.65. btc_dptx_mst_vcptab_addvc 9.66. btc_dptx_mst_vcptab_clear 9.67. btc_dptx_mst_vcptab_delvc 9.68. btc_dptx_mst_vcptab_update 9.69. btc_dptxll_syslib API Reference 9.70. btc_dptxll_hpd_change 9.71. btc_dptxll_hpd_irq 9.72. btc_dptxll_mst_cmp_ports 9.73. btc_dptxll_mst_edid_read_rep 9.74. btc_dptxll_mst_edid_read_req 9.75. btc_dptxll_mst_get_device_ports 9.76. btc_dptxll_mst_set_csn_callback 9.77. btc_dptxll_mst_topology_discover 9.78. btc_dptxll_stream_allocate_rep 9.79. btc_dptxll_stream_allocate_req 9.80. btc_dptxll_stream_calc_VCP_size 9.81. btc_dptxll_stream_delete_rep 9.82. btc_dptxll_stream_delete_req 9.83. btc_dptxll_stream_get 9.84. btc_dptxll_stream_set_color_space 9.85. btc_dptxll_stream_set_pixel_rate 9.86. btc_dptxll_sw_ver 9.87. btc_dptxll_syslib_add_tx 9.88. btc_dptxll_syslib_init 9.89. btc_dptxll_syslib_monitor 9.90. btc_dpxx_syslib Additional Types 9.91. btc_dprx_syslib Supported DPCD Locations
10. DisplayPort Source Register Map and DPCD Locations x
10.1. Source General Registers 10.2. Source MSA Registers 10.3. Source Link PHY Control and Status 10.4. Source Timestamp 10.5. Source CRC Registers 10.6. Source Audio Registers 10.7. Source MST Registers 10.8. Source AUX Controller Interface 10.9. Source-Supported DPCD Locations 10.10. Source AXI2CV Registers
10.1. Source General Registers x
10.1.1. DPTX_TX_CONTROL 10.1.2. DPTX_TX_STATUS 10.1.3. DPTX_TX_VERSION
10.2. Source MSA Registers x
10.2.1. DPTX0_MSA_MVID 10.2.2. DPTX0_MSA_NVID 10.2.3. DPTX0_MSA_HTOTAL 10.2.4. DPTX0_MSA_VTOTAL 10.2.5. DPTX0_MSA_HSP 10.2.6. DPTX0_MSA_HSW 10.2.7. DPTX0_MSA_HSTART 10.2.8. DPTX0_MSA_VSTART 10.2.9. DPTX0_MSA_VSP 10.2.10. DPTX0_MSA_VSW 10.2.11. DPTX0_MSA_HWIDTH 10.2.12. DPTX0_MSA_VHEIGHT 10.2.13. DPTX0_MSA_MISC0 10.2.14. DPTX0_MSA_MISC1 10.2.15. DPTX0_MSA_COLOR 10.2.16. DPTX0_VBID
10.3. Source Link PHY Control and Status x
10.3.1. DPTX_PRE_VOLT0/DPTX_REG_TXFFE0 10.3.2. DPTX_PRE_VOLT1/DPTX_REG_TXFFE1 10.3.3. DPTX_PRE_VOLT2/DPTX_REG_TXFFE2 10.3.4. DPTX_PRE_VOLT3/DPTX_REG_TXFFE3 10.3.5. DPTX_RECONFIG 10.3.6. DPTX_TEST_80BIT_PATTERN1/DPTX_TEST_264BIT_PATTERN1 10.3.7. DPTX_TEST_80BIT_PATTERN2/DPTX_TEST_264BIT_PATTERN2 10.3.8. DPTX_TEST_80BIT_PATTERN3/DPTX_TEST_264BIT_PATTERN3 10.3.9. DPTX_TEST_264BIT_PATTERN4 10.3.10. DPTX_TEST_264BIT_PATTERN5 10.3.11. DPTX_TEST_264BIT_PATTERN6 10.3.12. DPTX_TEST_264BIT_PATTERN7 10.3.13. DPTX_TEST_264BIT_PATTERN8 10.3.14. DPTX_TEST_264BIT_PATTERN9
10.7. Source MST Registers x
10.7.1. DPTX_MST_VCPTAB0 10.7.2. DPTX_MST_VCPTAB1 10.7.3. DPTX_MST_VCPTAB2 10.7.4. DPTX_MST_VCPTAB3 10.7.5. DPTX_MST_VCPTAB4 10.7.6. DPTX_MST_VCPTAB5 10.7.7. DPTX_MST_VCPTAB6 10.7.8. DPTX_MST_VCPTAB7 10.7.9. DPTX_MST_TAVG_TS 10.7.10. DPTX_MST_ECF0 10.7.11. DPTX_MST_ECF1
10.8. Source AUX Controller Interface x
10.8.1. DPTX_AUX_CONTROL 10.8.2. DPTX_AUX_COMMAND 10.8.3. DPTX_AUX_BYTE0 10.8.4. DPTX_AUX_BYTE1 10.8.5. DPTX_AUX_BYTE2 10.8.6. DPTX_AUX_BYTE3 10.8.7. DPTX_AUX_BYTE4 10.8.8. DPTX_AUX_BYTE5 10.8.9. DPTX_AUX_BYTE6 10.8.10. DPTX_AUX_BYTE7 10.8.11. DPTX_AUX_BYTE8 10.8.12. DPTX_AUX_BYTE9 10.8.13. DPTX_AUX_BYTE10 10.8.14. DPTX_AUX_BYTE11 10.8.15. DPTX_AUX_BYTE12 10.8.16. DPTX_AUX_BYTE13 10.8.17. DPTX_AUX_BYTE14 10.8.18. DPTX_AUX_BYTE15 10.8.19. DPTX_AUX_BYTE16 10.8.20. DPTX_AUX_BYTE17 10.8.21. DPTX_AUX_BYTE18 10.8.22. DPTX_AUX_RESET
10.10. Source AXI2CV Registers x
10.10.1. Source AXI2CV Registers Summary 10.10.2. Source AXI2CV Registers Description
10.10.2. Source AXI2CV Registers Description x
10.10.2.1. STATUS (0x50) 10.10.2.2. VIDEO_MODE_MATCH (0X51) 10.10.2.3. VIDEO_MODE_BANK_SELECT (0x53) 10.10.2.4. VIDEO_MODE_CONTROL (0x54) 10.10.2.5. VIDEO_MODE_SAMPLE_COUNT(0x55) 10.10.2.6. VIDEO_MODE_F0_LINE_COUNT (0x56) 10.10.2.7. VIDEO_MODE_F1_LINE_COUNT (0x57) 10.10.2.8. VIDEO_MODE_HORIZONTAL_FRONT_PORCH (0x58) 10.10.2.9. VIDEO_MODE_HORIZONTAL_SYNC_LENGTH (0x59) 10.10.2.10. VIDEO_MODE_HORIZONTAL_BLANKING (0x5A) 10.10.2.11. VIDEO_MODE_VERTICAL_FRONT_PORCH (0x5B) 10.10.2.12. VIDEO_MODE_VERTICAL_SYNC_LENGTH (0x5C) 10.10.2.13. VIDEO_MODE_VERTICAL_BLANKING (0x5D) 10.10.2.14. VIDEO_MODE_F0_VERTICAL_FRONT_PORCH (0x5E) 10.10.2.15. VIDEO_MODE_F0_VERTICAL_SYNC_LENGTH (0x5F) 10.10.2.16. VIDEO_MODE_F0_VERTICAL_BLANKING (0x60) 10.10.2.17. VIDEO_MODE_ACTIVE_PICTURE_LINE (0x61) 10.10.2.18. VIDEO_MODE_F0_VERTICAL_RISING (0x62) 10.10.2.19. VIDEO_MODE_FIELD_RISING (0x63) 10.10.2.20. VIDEO_MODE_FIELD_FALLING (0x64) 10.10.2.21. VIDEO_MODE_VALID (0x6D)
11. DisplayPort Sink Register Map and DPCD Locations x
11.1. Sink General Registers 11.2. Sink Timestamp 11.3. Sink Bit-Error Counters 11.4. FEC Registers 11.5. 128B/132B Link Quality Test Pattern Registers 11.6. Sink MSA Registers 11.7. Sink Audio Registers 11.8. Sink MST Registers 11.9. Sink AUX Controller Interface 11.10. Sink CRC Registers 11.11. Sink-Supported DPCD Locations 11.12. Sink CV2AXI Registers
11.1. Sink General Registers x
11.1.1. DPRX_RX_CONTROL 11.1.2. DPRX_RX_STATUS 11.1.3. DPRX_BER_CONTROL 11.1.4. DPRX_BER_CNT0 11.1.5. DPRX_BER_CNT1
11.3. Sink Bit-Error Counters x
11.3.1. DPRX_BER_CNTI0 11.3.2. DPRX_BER_CNTI1
11.4. FEC Registers x
11.4.1. DPRX_FEC_CONFIG 11.4.2. DPRX_FEC_ERROR_COUNT
11.5. 128B/132B Link Quality Test Pattern Registers x
11.5.1. DPRX_BER_TEST_PATTERN
11.6. Sink MSA Registers x
11.6.1. DPRX0_MSA_MVID 11.6.2. DPRX0_MSA_NVID 11.6.3. DPRX0_MSA_HTOTAL 11.6.4. DPRX0_MSA_VTOTAL 11.6.5. DPRX0_MSA_HSP 11.6.6. DPRX0_MSA_HSW 11.6.7. DPRX0_MSA_HSTART 11.6.8. DPRX0_MSA_VSTART 11.6.9. DPRX0_MSA_VSP 11.6.10. DPRX0_MSA_VSW 11.6.11. DPRX0_MSA_HWIDTH 11.6.12. DPRX0_MSA_VHEIGHT 11.6.13. DPRX0_MSA_MISC0 11.6.14. DPRX0_MSA_MISC1 11.6.15. DPRX0_MSA_COLOR 11.6.16. DPRX0_VBID
11.7. Sink Audio Registers x
11.7.1. DPRX0_AUD_MAUD 11.7.2. DPRX0_AUD_NAUD 11.7.3. DPRX0_AUD_AIF0 11.7.4. DPRX0_AUD_AIF1 11.7.5. DPRX0_AUD_AIF2 11.7.6. DPRX0_AUD_AIF3 11.7.7. DPRX0_AUD_AIF4
11.8. Sink MST Registers x
11.8.1. DPRX_MST_VCPTAB0 11.8.2. DPRX_MST_VCPTAB1 11.8.3. DPRX_MST_VCPTAB2 11.8.4. DPRX_MST_VCPTAB3 11.8.5. DPRX_MST_VCPTAB4 11.8.6. DPRX_MST_VCPTAB5 11.8.7. DPRX_MST_VCPTAB6 11.8.8. DPRX_MST_VCPTAB7
11.9. Sink AUX Controller Interface x
11.9.1. DPRX_AUX_CONTROL 11.9.2. DPRX_AUX_STATUS 11.9.3. DPRX_AUX_COMMAND 11.9.4. DPRX_AUX_BYTE0 11.9.5. DPRX_AUX_BYTE1 11.9.6. DPRX_AUX_BYTE2 11.9.7. DPRX_AUX_BYTE3 11.9.8. DPRX_AUX_BYTE4 11.9.9. DPRX_AUX_BYTE5 11.9.10. DPRX_AUX_BYTE6 11.9.11. DPRX_AUX_BYTE7 11.9.12. DPRX_AUX_BYTE8 11.9.13. DPRX_AUX_BYTE9 11.9.14. DPRX_AUX_BYTE10 11.9.15. DPRX_AUX_BYTE11 11.9.16. DPRX_AUX_BYTE12 11.9.17. DPRX_AUX_BYTE13 11.9.18. DPRX_AUX_BYTE14 11.9.19. DPRX_AUX_BYTE15 11.9.20. DPRX_AUX_BYTE16 11.9.21. DPRX_AUX_BYTE17 11.9.22. DPRX_AUX_BYTE18 11.9.23. DPRX_AUX_I2C0 11.9.24. DPRX_AUX_I2C1 11.9.25. DPRX_AUX_RESET 11.9.26. DPRX_AUX_HPD
11.12. Sink CV2AXI Registers x
11.12.1. Sink CV2AXI Registers Summary 11.12.2. Sink CV2AXI Registers Description
11.12.2. Sink CV2AXI Registers Description x
11.12.2.1. STATUS (0x50) 11.12.2.2. ACTIVE SAMPLE COUNT (0x52) 11.12.2.3. F0_ACTIVE_LINE_COUNT (0x53) 11.12.2.4. F1_ACTIVE_LINE_COUNT (0x54) 11.12.2.5. TOTAL_SAMPLE_COUNT (0x55) 11.12.2.6. F0_TOTAL_LINE_COUNT (0x56) 11.12.2.7. F1_TOTAL_LINE_COUNT (0x57) 11.12.2.8. COLOR_PATTERN (0x5C) 11.12.2.9. CONTROL (0x64)
1. DisplayPort Intel® FPGA IP Quick Reference
2. About This IP
3. Getting Started
4. DisplayPort Intel® FPGA IP Hardware Design Examples
5. DisplayPort Source
6. DisplayPort Sink
7. DisplayPort Intel® FPGA IP Parameters
8. DisplayPort Intel® FPGA IP Simulation Example
9. DisplayPort API Reference
10. DisplayPort Source Register Map and DPCD Locations
11. DisplayPort Sink Register Map and DPCD Locations
12. DisplayPort Intel® FPGA IP User Guide Archives
13. Document Revision History for the DisplayPort Intel® FPGA IP User Guide

6.5. HDCP 2.3 RX Architecture

The receiver block decrypts the protected video and secondary data, including main stream attributes (MSA), from the connected HDCP 2.3 device. The HDCP 2.3 receiver block has identical structure layers as the HDCP 2.3 transmitter block.
Figure 35. Architecture Block Diagram of HDCP 2.3 RX IP

The HDCP 2.3 RX core is fully autonomous. For DisplayPort application, the HDCP transmitter and the HDCP receiver communicates the HDCP register values over the AUX channel. Turn on the Enable GPU control parameter and use a Nios® II processor to drive the HDCP 2.3 RX core through the HDCP Register Port ( Avalon® memory-mapped interface). The HDCP Register Port is not exposed and will be automatically driven when you enable the Support HDCP 2.3 parameter.

The HDCP specifications requires the HDCP 2.3 RX core to be programmed with the DCP-issued production key – Global Constant (lc128), RSA private key (kprivrx) and RSA Public Key Certificate (certrx). The IP retrieves the key from the on-chip memory externally to the core through the HDCP Key Port (rx_hdcp interface). The on-chip memory must store the key data in the arrangement shown in the following table:

Table 39.  HDCP 2.3 RX Key Port Addressing
Address Content
8'hE3 lc128[127:96]
8'hE2 lc128[95:64]
8'hE1 lc128[63:32]
8'hE0 lc128[31:0]
8'hDF kprivrx_p[511:480]
... ...
8'hD0 kprivrx_p[31:0]
8'hCF kprivrx_q[511:480]
... ...
8'hC0 kprivrx_q[31:0]
8'hBF kprivrx_dp[511:480]
... ...
8'hB0 kprivrx_dp[31:0]
8'hAF kprivrx_dq[511:480]
... ...
8'hA0 kprivrx_dq[31:0]
8'h9F kprivrx_qinv[511:480]
... ...
8'h90 kprivrx_qinv[31:0]
8'h83–8'h8F Reserved
8'h82 {16’d0, certrx[4175:4160]}
8'h81 certrx[4159:4128]
... ...
8'h01 certrx[63:32]
8'h00 certrx[31:0]

The Video Stream and Secondary Data Layer receives audio and video content over its Video and Secondary Data Input Port, and performs the decryption operation. The Video Stream and Secondary Data Layer detects the Encryption Status Signaling (ESS) provided by the DisplayPort IP to determine when to decrypt frames.

To implement the HDCP 2.3 RX core as a repeater upstream interface, the IP must propagate certain information such as ReceiverID List and RxInfo to the upstream transmitter and to be used for HMAC computation. The repeater downstream interface (TX) must provide this information using the Repeater Message Port (rx_rpt_msg interface) using the Avalon® memory-mapped interface. You can use the same clock source to drive the clocking for the HDCP Register Port (or the controller interface of the DisplayPort Intel® FPGA IP) and Repeater Message Port.

The mapping for the RX registers and RX Repeater registers are defined in the following tables.

Table 40.  HDCP 2.3 RX Register Mapping
Address Register R/W Reset Bit Bit Name Description
0x40 CTRL RW 0x00000000 31 Reserved Reserved.
30 CP_IRQ_DET Write-only. Set to 1 to reset the CP_IRQ_STATUS flag in the RXSTATUS register.
29 STOP_DET Write-only. Set to 1 to indicate the end of HDCP messages.
28:1 Reserved Reserved.
0 TYPE

0: Type 0 content stream.

1: Type 1 content stream.
Note: Only applies to Non-Repeater mode.
0x41 RXSTATUS RO 0x00000000 31:19 Reserved Reserved.
18 CP_IRQ_STATUS

0: No HDCP 2.3 event.

1: An HDCP 2.3 event occurred and HPD interrupts were generated.
17:5 Reserved Reserved.
4 LINK_INTEGRITY_FAILURE RxStatus[4:0].

Refer to the HDCP on DisplayPort Specification version 2.3 for more information.

3 REAUTH_IRQ
2 PAIRING_AVAILABLE
1 HPRIME_AVAILABLE
0 READY
0x42 MESSAGES RW 0x00000000 31:8 Reserved Reserved.
7:0 MESSAGES Write or read messages (in bytes) to or from the IP in burst mode.
0x43 RXCAPS RO 0x00020002 31:24 Reserved Reserved.
23:16 VERSION Default value is 0x02.
15:2 RECEIVER_CAPABILITY_MASK Reserved. Read as 0.
1 HDCP_CAPABLE Default value is 0x01. Indicates that the RX is HDCP 2.3 capable.
0 REPEATER

0: Indicates that the RX is an endpoint receiver.

1: Indicates that the RX is a repeater that supports downstream connections.
0x44 STRMTYP_L RW 0x00000000 31:0 STRMTYP_L

Unused when operating in Non-Repeater mode.

When operating in MST mode, bit 1 to bit 31 represent the Stream Content Type for time slot 1 to time slot 31. Bit 0 is unused.

When operating in SST mode, bit 0 represent the Stream Content Type. Bit 1 to bit 31 are unused.

0x45 STRMTYP_H RW 0x00000000 31:0 STRMTYP_H

Unused when operating in Non-Repeater mode.

When operating in MST mode, bit 0 to bit 31 represent the Stream Content Type for time slot 32 to time slot 63.

When operating in SST mode, all bits are unused.
Table 41.  HDCP 2.3 RX Repeater Register Mapping
Address Register R/W Reset Bit Bit Name Description
0x00 RPT_RCVDID_LIST WO 0x00000000 31:8 Reserved Reserved.
7:0 RCVDID_LIST Byte write ReceiverID_List in big endian order.
0x01 RPT_RXINFO RW 0x00000000 31:19 Reserved Reserved.
18 REQUEST Read-only. Asserted by the core to request for RCVDID_LIST and RXINFO. This usually happens when re-authentication is triggered by the connected upstream. Note that when REQUEST is asserted, the READY should also be asserted.
17 READY Read-only. Asserted by the core to indicate RCVDID_LIST and RXINFO are processed. Write RCVDID_LIST and RXINFO after this bit is asserted.
16 VALID Set to 1 after RCVDID_LIST and RXINFO are written. Self-cleared by the core after RCVDID_LIST and RXINFO are read.
15:0 RXINFO

[15:12]: Reserved.

[11:9]: DEPTH

[8:4]: DEVICE_COUNT

[3]: MAX_DEVS_EXCEEDED

[2]: MAX_CASCADE_EXCEEDED

[1]: HDCP2_REPEATER_DOWNSTREAM

[0]: HDCP1_DEVICE_DOWNSTREAM

0x02 RPT_TYPE RO 0x00000000 31:9 Reserved Reserved.
8 VALID Asserted by the core to indicate content stream TYPE is valid. Self-cleared by the core after TYPE is read.
7:0 TYPE

0x00: Type 0 Content Stream

0x01: Type 1 Content Stream

0x02-0xFF: Reserved. Treated as Type 1 Content Stream.
0x03 RPT_MISC RW 0x00000000 31:1 Reserved Reserved.
0 REPEATER

Set to 0 if no downstream is connected or if the connected downstream is not HDCP 2.3-capable. This means the receiver IP is an end-point receiver rather than a repeater.

Set to 1 if the connected downstream is HDCP- capable.

Level Two Title