DisplayPort Intel® FPGA IP User Guide

ID 683273
Date 10/16/2023
Public
Document Table of Contents

4.3.4.1. Set Up the Hardware

Set up the hardware using the following steps:

  1. Connect the Bitec daughter card to the FPGA development board.
  2. Connect the development board to your PC using a USB cable.
    Note: The FPGA development board has an On-Board Intel® FPGA Download Cable II connection. If your version of the board does not have this connection, you can use an external Intel® FPGA Download Cable. Refer to the documentation for your board for more information.
  3. Connect a DisplayPort cable from the DisplayPort TX on the Bitec HSMC daughter card to a DisplayPort monitor (do not power up the monitor).
  4. Power-up the development board.
  5. Connect one end of a DisplayPort cable to your PC (do not connect the other end to anything).