Visible to Intel only — GUID: nfa1448948464121
Ixiasoft
1. Quick Start Guide
2. 10M/100M/1G/10G Ethernet Design Example for Intel® Arria® 10 Devices
3. 1G/10G Ethernet Design Example for Intel® Arria® 10 Devices
4. 10GBASE-R Ethernet Design Example for Intel® Arria® 10 Devices
5. 1G/2.5G Ethernet Design Example for Intel® Arria® 10 Devices
6. 1G/2.5G/10G Ethernet Design Example for Intel® Arria® 10 Devices
7. 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example for Intel® Arria® 10 Devices
8. Interface Signals Description
9. Configuration Registers Description
10. Low Latency Ethernet 10G MAC Intel® Arria® 10 FPGA IP Design Example User Guide Archives
11. Document Revision History for the Low Latency Ethernet 10G MAC Intel® Arria® 10 FPGA IP Design Example User Guide
Visible to Intel only — GUID: nfa1448948464121
Ixiasoft
4.5.1. Test Cases
You can run any of the following tests from the System Console.
Test Case | Command | Description |
---|---|---|
SFP+ loopback |
source gen_conf.tcl | The generator generates and sends about 4 billion packets. Wait 6 minutes for it to complete its tasks. |
source monitor_conf.tcl | The monitor checks the number of good and bad packets received. | |
source show_stats.tcl | This script displays the values of the statistics counters. | |
Avalon® streaming interface loopback | source loopback_conf.tcl | This command enables the Avalon® streaming interface loopback. This test is used with an external tester such as Spirent tester. |
After the test is completed, observe the output displayed in the System Console.
Figure 31. Sample Test Output—Ethernet Packet Monitor
Figure 32. Sample Test Output—Statistics Counters