DisplayPort Arria® 10 FPGA IP Design Example User Guide

Download PDF
ID 683050
Date 4/29/2024
Public
Document Table of Contents
Document Table of Contents x
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide 2. DisplayPort Design Examples 3. HDCP Over DisplayPort Design Example 4. DisplayPort Arria® 10 FPGA IP Design Example User Guide Archives 5. Revision History for DisplayPort Arria® 10 FPGA IP Design Example User Guide
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide x
1.1. Directory Structure 1.2. DisplayPort Intel® FPGA IP Design Example Hardware and Software Requirements 1.3. Generating the DisplayPort Intel® FPGA IP Design Example 1.4. Simulating the Design 1.5. Compiling and Testing the Design 1.6. DisplayPort Intel® FPGA IP Design Example Parameters
1.5. Compiling and Testing the Design x
1.5.1. Regenerating .elf File
2. DisplayPort Design Examples x
2.1. Arria® 10 DisplayPort SST Parallel Loopback Design Features 2.2. Arria® 10 DisplayPort MST Parallel Loopback Design Features 2.3. Enabling Adaptive Sync Support 2.4. Arria® 10 DisplayPort SST TX-only or RX-only Design Features 2.5. Design Components 2.6. Clocking Scheme 2.7. Interface Signals and Parameters 2.8. Hardware Setup 2.9. Simulation Testbench 2.10. DisplayPort Transceiver Reconfiguration Flow 2.11. Transceiver Lane Configurations
2.4. Arria® 10 DisplayPort SST TX-only or RX-only Design Features x
2.4.1. Arria® 10 DisplayPort SST TX-only Design Features 2.4.2. Arria® 10 DisplayPort SST RX-only Design Features
3. HDCP Over DisplayPort Design Example x
3.1. High-bandwidth Digital Content Protection (HDCP) 3.2. HDCP Over DisplayPort Design Example Architecture 3.3. Nios® V Processor Software Flow 3.4. Design Walkthrough 3.5. Protection of Encryption Key Embedded in FPGA Design 3.6. Debug Guidelines
3.4. Design Walkthrough x
3.4.1. Setting Up the Hardware 3.4.2. Generating the Design 3.4.3. Including HDCP Production Keys 3.4.4. Compiling the Design 3.4.5. Viewing the Results
3.4.3. Including HDCP Production Keys x
3.4.3.1. Storing Plain HDCP Production Keys in the FPGA (Support HDCP Key Management = 0) 3.4.3.2. Storing Encrypted HDCP Production Keys in the External Flash Memory or EEPROM (Support HDCP Key Management = 1)
3.4.3.1. Storing Plain HDCP Production Keys in the FPGA (Support HDCP Key Management = 0) x
3.4.3.1.1. HDCP Key Mapping from DCP Key Files 3.4.3.1.2. hdcp1x_tx_kmem.v and hdcp1x_rx_kmem.v files 3.4.3.1.3. hdcp2x_rx_kmem.v file 3.4.3.1.4. hdcp2x_tx_kmem.v file
3.4.3.2. Storing Encrypted HDCP Production Keys in the External Flash Memory or EEPROM (Support HDCP Key Management = 1) x
3.4.3.2.1. Intel KEYENC 3.4.3.2.2. Key Programmer
3.5. Protection of Encryption Key Embedded in FPGA Design x
3.5.1. Security Considerations
3.6. Debug Guidelines x
3.6.1. HDCP Status Signals 3.6.2. Modifying HDCP Software Parameters 3.6.3. Frequently Asked Questions (FAQ)
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide
2. DisplayPort Design Examples
3. HDCP Over DisplayPort Design Example
4. DisplayPort Arria® 10 FPGA IP Design Example User Guide Archives
5. Revision History for DisplayPort Arria® 10 FPGA IP Design Example User Guide

2.3. Enabling Adaptive Sync Support

To enable support for the Adaptive Sync feature in the design examples without PCR, you need to edit the MSA_TIMING_PAR_IGNORED bit of the DPCD 00007h register and the MSA_TIMING_PAR_IGNORE_EN bit of the DPCD 00107h register in the rx_utils.c file in the software folder.
Note: The Adaptive Sync feature is applicable only when you turn on the Enable GPU control parameter.
To edit the bits:
  1. Locate data[7] = 0x80; // DPCD_ADDR_DOWN_STREAM_PORT_COUNT.
  2. Change 0x80 to 0xC0.
  3. Locate data[7] = 0x00; // DPCD_ADDR_DOWNSPREAD_CTRL
  4. Change 0x00 to 0x80.
  5. Regenerate the ELF file, refer to Regenerating .elf File.
  6. After programming the SOF file into the FPGA, program the updated ELF file into the FPGA.
Level Two Title