Low Latency Ethernet 10G MAC Stratix® 10 FPGA IP Design Example User Guide

Download PDF
ID 683026
Date 1/23/2025
Public
Document Table of Contents
Document Table of Contents x
1. Quick Start Guide 2. 10GBASE-R Ethernet Design Example 3. 10M/100M/1G/2.5G/10G Ethernet Design Example 4. 1G/2.5G Ethernet Design Example with IEEE 1588v2 Feature 5. 1G/2.5G/10G Ethernet Design Example with IEEE 1588v2 Feature 6. 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example 7. Interface Signals Description 8. Configuration Registers Description 9. Low Latency Ethernet 10G MAC Stratix® 10 FPGA IP Design Example User Guide Archives 10. Document Revision History for the Low Latency Ethernet 10G MAC Stratix® 10 FPGA IP Design Example User Guide
1. Quick Start Guide x
1.1. Directory Structure 1.2. Generating the Design 1.3. Compiling and Simulating the Design 1.4. Changing Target Device in Hardware Design Example 1.5. Compiling and Testing the Design in Hardware
1.2. Generating the Design x
1.2.1. Procedure 1.2.2. Design Example Parameters
1.3. Compiling and Simulating the Design x
1.3.1. Procedure 1.3.2. Testbench
1.3.1. Procedure x
1.3.1.1. Updating PHY IP Design File Names
1.4. Changing Target Device in Hardware Design Example x
1.4.1. Procedure
1.5. Compiling and Testing the Design in Hardware x
1.5.1. Procedure 1.5.2. Hardware Setup
2. 10GBASE-R Ethernet Design Example x
2.1. Features 2.2. Hardware and Software Requirements 2.3. Functional Description 2.4. Simulation 2.5. Hardware Testing 2.6. Interface Signals 2.7. Configuration Registers
2.3. Functional Description x
2.3.1. Design Components 2.3.2. Clocking and Reset Scheme
2.5. Hardware Testing x
2.5.1. Test Cases 2.5.2. Configuring FIFO Depth for Avalon® Streaming Loopback 2.5.3. Running Avalon® Streaming Loopback Test Case with Jumbo Ethernet Packets
3. 10M/100M/1G/2.5G/10G Ethernet Design Example x
3.1. Features 3.2. Hardware and Software Requirements 3.3. Functional Description 3.4. Simulation 3.5. Hardware Testing 3.6. Interface Signals 3.7. Configuration Registers
3.3. Functional Description x
3.3.1. Design Components 3.3.2. Clocking Scheme 3.3.3. Reset Scheme 3.3.4. Timing Constraints
3.5. Hardware Testing x
3.5.1. Test Procedure
4. 1G/2.5G Ethernet Design Example with IEEE 1588v2 Feature x
4.1. Features 4.2. Hardware and Software Requirements 4.3. Functional Description 4.4. Simulation 4.5. Hardware Testing 4.6. Interface Signals 4.7. Configuration Registers
4.3. Functional Description x
4.3.1. Design Components 4.3.2. Clocking Scheme 4.3.3. Reset Scheme 4.3.4. Timing Constraints
4.4. Simulation x
4.4.1. Test Case—Design Example with the IEEE 1588v2 Feature
4.5. Hardware Testing x
4.5.1. Test Procedure
5. 1G/2.5G/10G Ethernet Design Example with IEEE 1588v2 Feature x
5.1. Features 5.2. Hardware and Software Requirements 5.3. Functional Description 5.4. Simulation 5.5. Hardware Testing 5.6. Interface Signals 5.7. Configuration Registers
5.3. Functional Description x
5.3.1. Design Components 5.3.2. Clocking Scheme 5.3.3. Reset Scheme 5.3.4. Timing Constraints
5.4. Simulation x
5.4.1. Test Case—Design Example with the IEEE 1588v2 Feature
5.5. Hardware Testing x
5.5.1. Changing to SFP+ Setting 5.5.2. Test Procedure
6. 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example x
6.1. Features 6.2. Hardware and Software Requirements 6.3. Functional Description 6.4. Simulation 6.5. Hardware Testing 6.6. Interface Signals 6.7. Configuration Registers
6.3. Functional Description x
6.3.1. Design Components 6.3.2. Clocking Scheme 6.3.3. Reset Scheme
6.4. Simulation x
6.4.1. Test Case—Design Example with the IEEE 1588v2 Feature 6.4.2. Test Case—Design Example without the IEEE 1588v2 Feature
6.5. Hardware Testing x
6.5.1. Test Procedure
7. Interface Signals Description x
7.1. Clock and Reset Interface Signals 7.2. Avalon® Memory-Mapped Interface Signals 7.3. Avalon® Streaming Interface Signals 7.4. PHY Interface Signals 7.5. Status Interface 7.6. IEEE 1588v2 Timestamp Interface Signals 7.7. Packet Classifier Interface Signals 7.8. TOD Interface Signals
8. Configuration Registers Description x
8.1. Register Access Definition 8.2. Low Latency Ethernet 10G MAC 8.3. PHY 8.4. Transceiver Reconfiguration 8.5. TOD
8.3. PHY x
8.3.1. 1G/2.5G/5G/10G Multirate PHY
1. Quick Start Guide
2. 10GBASE-R Ethernet Design Example
3. 10M/100M/1G/2.5G/10G Ethernet Design Example
4. 1G/2.5G Ethernet Design Example with IEEE 1588v2 Feature
5. 1G/2.5G/10G Ethernet Design Example with IEEE 1588v2 Feature
6. 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example
7. Interface Signals Description
8. Configuration Registers Description
9. Low Latency Ethernet 10G MAC Stratix® 10 FPGA IP Design Example User Guide Archives
10. Document Revision History for the Low Latency Ethernet 10G MAC Stratix® 10 FPGA IP Design Example User Guide

1.4.1. Procedure

To change the target device in your hardware design example, follow these steps:

  1. Launch the Quartus® Prime Pro Edition software and open the hardware test project file /hardware_test_design/altera_eth_top.qpf.
  2. On the Assignments menu, click Device. The Device dialog box appears.
  3. In the Device dialog box, select the device in the target device table that matches the device part number on your development kit. Refer to the Stratix® 10 GX Signal Integrity Development Kit link on the Altera website for more information.
  4. A prompt appears when you select a device, as shown in the figure below. Select No to preserve the generated pin assignments and I/O assignments.
    Figure 5.  Quartus® Prime Prompt for Device Selection
  5. If you select an L-Tile GX device such as 1SG280LU2F50E2VG as your target device, click Upgrade IP Components in Project menu, select L-Tile/H-Tile Transceiver Native PHY Stratix® 10 FPGA IP from the list of IP components, and click Upgrade in Editor. Regenerate this IP component.
    Note: If you select H-Tile GX as your target device, skip this step if you are using the same Quartus and IP version.
  6. Perform full compilation of your design.
You can now test the design on your hardware.
Note: No other pin assignment modifications are required for the design example. When you generate the design example targeting other Stratix® 10 development kits, refer to the respective development kit user guides for pin assignment.
Related Information
Level Two Title