Low Latency Ethernet 10G MAC Intel® Stratix® 10 FPGA IP Design Example User Guide

Download PDF
ID 683026
Date 1/08/2024
Public
Document Table of Contents
Document Table of Contents x
1. Quick Start Guide 2. 10GBASE-R Ethernet Design Example 3. 10M/100M/1G/2.5G/10G Ethernet Design Example 4. 1G/2.5G Ethernet Design Example with IEEE 1588v2 Feature 5. 1G/2.5G/10G Ethernet Design Example with IEEE 1588v2 Feature 6. 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example 7. Interface Signals Description 8. Configuration Registers Description 9. Low Latency Ethernet 10G MAC Intel® Stratix® 10 FPGA IP Design Example User Guide Archives 10. Document Revision History for the Low Latency Ethernet 10G MAC Intel® Stratix® 10 FPGA IP Design Example User Guide
1. Quick Start Guide x
1.1. Directory Structure 1.2. Generating the Design 1.3. Compiling and Simulating the Design 1.4. Changing Target Device in Hardware Design Example 1.5. Compiling and Testing the Design in Hardware
1.2. Generating the Design x
1.2.1. Procedure 1.2.2. Design Example Parameters
1.3. Compiling and Simulating the Design x
1.3.1. Procedure 1.3.2. Testbench
1.3.1. Procedure x
1.3.1.1. Updating PHY IP Design File Names
1.4. Changing Target Device in Hardware Design Example x
1.4.1. Procedure
1.5. Compiling and Testing the Design in Hardware x
1.5.1. Procedure 1.5.2. Hardware Setup
2. 10GBASE-R Ethernet Design Example x
2.1. Features 2.2. Hardware and Software Requirements 2.3. Functional Description 2.4. Simulation 2.5. Hardware Testing 2.6. Interface Signals 2.7. Configuration Registers
2.3. Functional Description x
2.3.1. Design Components 2.3.2. Clocking and Reset Scheme
2.5. Hardware Testing x
2.5.1. Test Cases 2.5.2. Configuring FIFO Depth for Avalon® Streaming Loopback 2.5.3. Running Avalon® Streaming Loopback Test Case with Jumbo Ethernet Packets
3. 10M/100M/1G/2.5G/10G Ethernet Design Example x
3.1. Features 3.2. Hardware and Software Requirements 3.3. Functional Description 3.4. Simulation 3.5. Hardware Testing 3.6. Interface Signals 3.7. Configuration Registers
3.3. Functional Description x
3.3.1. Design Components 3.3.2. Clocking Scheme 3.3.3. Reset Scheme 3.3.4. Timing Constraints
3.5. Hardware Testing x
3.5.1. Test Procedure
4. 1G/2.5G Ethernet Design Example with IEEE 1588v2 Feature x
4.1. Features 4.2. Hardware and Software Requirements 4.3. Functional Description 4.4. Simulation 4.5. Hardware Testing 4.6. Interface Signals 4.7. Configuration Registers
4.3. Functional Description x
4.3.1. Design Components 4.3.2. Clocking Scheme 4.3.3. Reset Scheme 4.3.4. Timing Constraints
4.4. Simulation x
4.4.1. Test Case—Design Example with the IEEE 1588v2 Feature
4.5. Hardware Testing x
4.5.1. Test Procedure
5. 1G/2.5G/10G Ethernet Design Example with IEEE 1588v2 Feature x
5.1. Features 5.2. Hardware and Software Requirements 5.3. Functional Description 5.4. Simulation 5.5. Hardware Testing 5.6. Interface Signals 5.7. Configuration Registers
5.3. Functional Description x
5.3.1. Design Components 5.3.2. Clocking Scheme 5.3.3. Reset Scheme 5.3.4. Timing Constraints
5.4. Simulation x
5.4.1. Test Case—Design Example with the IEEE 1588v2 Feature
5.5. Hardware Testing x
5.5.1. Changing to SFP+ Setting 5.5.2. Test Procedure
6. 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example x
6.1. Features 6.2. Hardware and Software Requirements 6.3. Functional Description 6.4. Simulation 6.5. Hardware Testing 6.6. Interface Signals 6.7. Configuration Registers
6.3. Functional Description x
6.3.1. Design Components 6.3.2. Clocking Scheme 6.3.3. Reset Scheme
6.4. Simulation x
6.4.1. Test Case—Design Example with the IEEE 1588v2 Feature 6.4.2. Test Case—Design Example without the IEEE 1588v2 Feature
6.5. Hardware Testing x
6.5.1. Test Procedure
7. Interface Signals Description x
7.1. Clock and Reset Interface Signals 7.2. Avalon® Memory-Mapped Interface Signals 7.3. Avalon® Streaming Interface Signals 7.4. PHY Interface Signals 7.5. Status Interface 7.6. IEEE 1588v2 Timestamp Interface Signals 7.7. Packet Classifier Interface Signals 7.8. TOD Interface Signals
8. Configuration Registers Description x
8.1. Register Access Definition 8.2. Low Latency Ethernet 10G MAC 8.3. PHY 8.4. Transceiver Reconfiguration 8.5. TOD
8.3. PHY x
8.3.1. 1G/2.5G/5G/10G Multi-rate PHY
1. Quick Start Guide
2. 10GBASE-R Ethernet Design Example
3. 10M/100M/1G/2.5G/10G Ethernet Design Example
4. 1G/2.5G Ethernet Design Example with IEEE 1588v2 Feature
5. 1G/2.5G/10G Ethernet Design Example with IEEE 1588v2 Feature
6. 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example
7. Interface Signals Description
8. Configuration Registers Description
9. Low Latency Ethernet 10G MAC Intel® Stratix® 10 FPGA IP Design Example User Guide Archives
10. Document Revision History for the Low Latency Ethernet 10G MAC Intel® Stratix® 10 FPGA IP Design Example User Guide

5.3.1. Design Components

Table 13.  Design Components
Component Description
LL 10GbE MAC

The Low Latency Ethernet 10G MAC Intel® FPGA IP with the following configuration:

  • Speed: 1G/2.5G/10G
  • Datapath options: TX & RX
  • Enable ECC on memory blocks: Not selected
  • Enable supplementary address: Selected
  • Enable statistics collection: Selected
  • Statistics counters: Memory-based
  • TX and RX datapath Reset/Default To Enable: Selected
  • All Legacy Ethernet 10G MAC Interfaces options: Selected
For the design example with the IEEE 1588v2 feature, the following additional parameters are configured:
  • Enable time stamping: Selected
  • Enable PTP one-step clock support: Selected
  • Timestamp fingerprint width: 4
  • Time Of Day format: Enable both 96b and 64b Time of Day Format
PHY The 1G/2.5G/5G/10G Multirate Ethernet PHY Intel® FPGA IP with the following configuration:
  • Speed: 1G/2.5G/10G
  • Enable SGMII bridge: Not selected
  • Enabled IEEE 1588 Precision Time Protocol: Selected
  • Connect to MGBASE-T PHY: Selected
  • Connect to NBASE-T PHY: Not selected
  • PHY ID (32 bit): 0x00000000
  • VCCR_GXB and VCC_GXB supply voltage for the Transceiver: 1_0V
  • Reference clock frequency for 10GbE (MHz): 644.53125
  • Selected TX PMA local clock division factor for 1 GbE: 1
  • Selected TX PMA local clock division factor for 2.5 GbE: 1
  • Enable Native PHY Debug Master Endpoint: Not selected
  • Enable capability registers: Not selected
  • Enable control and status registers: Not selected
  • Enable PRBS soft accumulators: Not selected
Transceiver Reset Controller The Transceiver PHY Reset Controller Intel® Stratix® 10 FPGA IP. Resets the transceiver.
Avalon® Memory-Mapped Mux Transceiver Reconfig Provides the transceiver reconfig block and system console access to the PHY's Avalon® memory-mapped interface.
Transceiver Reconfig Reconfigures the transceiver channel speed from 1G to 2.5G, or to 10G, and vice versa.
ATX PLL Generates a TX serial clock for the Intel® Stratix® 10 2.5G and 10G transceiver.
fPLL Generates a TX serial clock for the Intel® Stratix® 10 1G transceiver.
Design Components for the IEEE 1588v2 Feature
ToD Sampling fPLL Generates the clocks for the 1588 design components.
Master ToD The master ToD for all channels.
ToD Synch Synchronizes the master ToD to all local ToDs.
Local ToD The ToD for each channel.
Master PPS The master PPS. Returns pulse per second (pps) for all channels.
PPS The slave PPS. Returns pulse per second (pps) for each channel.
PTP Packet Classifier Decodes the packet type of incoming PTP packets and returns the decoded information to the LL 10GbE MAC Intel® FPGA IP.
Level Two Title