Visible to Intel only — GUID: etr1699471543922
Ixiasoft
1. About the GTS CPRI PHY FPGA IP
2. Getting Started
3. GTS CPRI PHY IP Parameter Settings
4. Functional Description
5. Interface Signals
6. GTS CPRI PHY IP Registers
7. GTS CPRI PHY IP Troubleshooting
8. GTS CPRI PHY Intel FPGA IP User Guide Archives
9. Document Revision History for the GTS CPRI PHY Intel FPGA IP User Guide
5.1. GTS CPRI PHY IP Clock Signals
5.2. GTS CPRI PHY IP Reset Signals
5.3. GTS CPRI PHY IP TX MII (64b/66b)
5.4. GTS CPRI PHY IP RX MII (64b/66b)
5.5. GTS CPRI PHY IP Status Interface for 64b/66b Line Rate
5.6. GTS CPRI PHY IP TX Interface (8b/10b)
5.7. GTS CPRI PHY IP RX Interface (8b/10b)
5.8. GTS CPRI PHY IP Status Interface for 8b/10b Line Rate
5.9. GTS CPRI PHY IP Serial Interface
5.10. GTS CPRI PHY Reconfiguration Interface
5.11. GTS CPRI PHY IP Datapath and PMA Avalon Memory-Mapped Interface
Visible to Intel only — GUID: etr1699471543922
Ixiasoft
5.11. GTS CPRI PHY IP Datapath and PMA Avalon Memory-Mapped Interface
Port Name | Width (Bits) | Domain | Description |
---|---|---|---|
i_reconfig_addr | 18 | i_reconfig_clk | Address for hard CSRs. Word addressing is used. |
i_reconfig_read | 1 | i_reconfig_clk | Read command for hard CSRs. |
i_reconfig_write | 1 | i_reconfig_clk | Write command for hard CSRs. |
o_reconfig_readdata | 32 | i_reconfig_clk | Read data from hard CSRs. |
o_reconfig_readdatavalid | 1 | i_reconfig_clk | Read data from hard CSRs is valid. |
i_reconfig_writedata | 32 | i_reconfig_clk | Data for writes to hard CSRs. |
o_reconfig_waitrequest | 1 | i_reconfig_clk | Stalling signal for operations on hard CSRs. |
i_reconfig_byteenable | 4 | i_reconfig_clk | Byteenable for hard CSRs |