Intel Agilex® 7 LVDS SERDES User Guide: F-Series and I-Series

Download PDF
ID 721819
Date 12/11/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Overview 2. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Architecture 3. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Transmitter 4. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Receiver 5. Intel Agilex® 7 F-Series and I-Series High-Speed LVDS I/O Implementation Guide 6. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Timing 7. LVDS SERDES Intel® FPGA IP Design Examples 8. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Design Guidelines 9. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Troubleshooting Guidelines 10. Documentation Related to the Intel Agilex® 7 LVDS SERDES User Guide: F-Series and I-Series 11. Document Revision History for the Intel Agilex® 7 LVDS SERDES User Guide: F-Series and I-Series
1. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Overview x
1.1. LVDS SERDES Usage Modes
2. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Architecture x
2.1. F-Series and I-Series GPIO Banks, SERDES, and DPA Locations 2.2. SERDES Blocks, Modes, and Clock Domains
3. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Transmitter x
3.1. LVDS SERDES Transmitter Blocks 3.2. Serializer 3.3. Differential I/O Bit Position 3.4. Clocking the Differential Transmitters
3.2. Serializer x
3.2.1. Serializer Bypass for DDR and SDR Operations
3.4. Clocking the Differential Transmitters x
3.4.1. Transmitter Output Clock Parameters Settings
3.4.1. Transmitter Output Clock Parameters Settings x
3.4.1.1. Edge-Aligned tx_outclock to tx_out 3.4.1.2. Center-Aligned tx_outclock to tx_out
4. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Receiver x
4.1. LVDS SERDES Receiver Blocks 4.2. Clocking the LVDS SERDES Receivers 4.3. LVDS SERDES Receiver Modes
4.1. LVDS SERDES Receiver Blocks x
4.1.1. Dynamic Phase Alignment Block 4.1.2. Synchronizer (DPA FIFO) 4.1.3. Data Realignment Block (Bit Slip) 4.1.4. Deserializer
4.2. Clocking the LVDS SERDES Receivers x
4.2.1. Receiver Input Clock Parameters Settings
4.2.1. Receiver Input Clock Parameters Settings x
4.2.1.1. Edge-Aligned inclock to rx_in 4.2.1.2. Center-Aligned inclock to rx_in
4.3. LVDS SERDES Receiver Modes x
4.3.1. Non-DPA Mode 4.3.2. DPA Mode 4.3.3. Soft-CDR Mode
5. Intel Agilex® 7 F-Series and I-Series High-Speed LVDS I/O Implementation Guide x
5.1. LVDS SERDES Intel® FPGA IP 5.2. LVDS Interface with External PLL Mode 5.3. LVDS SERDES IP Initialization and Reset
5.1. LVDS SERDES Intel® FPGA IP x
5.1.1. Release Information 5.1.2. LVDS SERDES Intel® FPGA IP Features 5.1.3. LVDS SERDES IP Usage Modes 5.1.4. Generating the LVDS SERDES Intel® FPGA IP 5.1.5. LVDS SERDES Intel® FPGA IP Parameter Settings 5.1.6. LVDS SERDES Intel® FPGA IP Signals
5.1.4. Generating the LVDS SERDES Intel® FPGA IP x
5.1.4.1. Intel® FPGA IP Generation Output
5.1.5. LVDS SERDES Intel® FPGA IP Parameter Settings x
5.1.5.1. LVDS SERDES Intel® FPGA IP General Settings 5.1.5.2. LVDS SERDES Intel® FPGA IP PLL Settings 5.1.5.3. LVDS SERDES Intel® FPGA IP Receiver Settings 5.1.5.4. LVDS SERDES Intel® FPGA IP Transmitter Settings 5.1.5.5. LVDS SERDES Intel® FPGA IP Clock Resource Summary
5.2. LVDS Interface with External PLL Mode x
5.2.1. IOPLL IP Signal Interface with LVDS SERDES IP 5.2.2. IOPLL Parameter Values for External PLL Mode 5.2.3. Connection between IOPLL IP and LVDS SERDES IP in External PLL Mode
5.3. LVDS SERDES IP Initialization and Reset x
5.3.1. Initializing the LVDS SERDES IP in Non-DPA Mode 5.3.2. Initializing the LVDS SERDES IP in DPA Mode 5.3.3. Resetting the DPA 5.3.4. Word Boundaries Alignment
5.3.4. Word Boundaries Alignment x
5.3.4.1. Aligning Word Boundaries
6. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Timing x
6.1. LVDS SERDES Intel® FPGA IP Timing 6.2. LVDS SERDES Source-Synchronous Timing Budget
6.1. LVDS SERDES Intel® FPGA IP Timing x
6.1.1. I/O Timing Analysis 6.1.2. FPGA Timing Analysis 6.1.3. Timing Analysis for the External PLL Mode
6.1.1. I/O Timing Analysis x
6.1.1.1. Obtaining RSKM Report 6.1.1.2. Obtaining TCCS Report
6.2. LVDS SERDES Source-Synchronous Timing Budget x
6.2.1. Transmitter Channel-to-Channel Skew 6.2.2. Receiver Skew Margin
7. LVDS SERDES Intel® FPGA IP Design Examples x
7.1. LVDS SERDES IP Synthesizable Intel® Quartus® Prime Design Examples 7.2. LVDS SERDES IP Simulation Design Example
8. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Design Guidelines x
8.1. Use PLLs in Integer PLL Mode for LVDS 8.2. Use High-Speed Clock from PLL to Clock SERDES Only 8.3. Pin Placement for Differential Channels 8.4. SERDES Pin Pairs for Soft-CDR Mode 8.5. Placing LVDS Transmitters and Receivers in the Same GPIO Bank
1. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Overview
2. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Architecture
3. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Transmitter
4. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Receiver
5. Intel Agilex® 7 F-Series and I-Series High-Speed LVDS I/O Implementation Guide
6. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Timing
7. LVDS SERDES Intel® FPGA IP Design Examples
8. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Design Guidelines
9. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Troubleshooting Guidelines
10. Documentation Related to the Intel Agilex® 7 LVDS SERDES User Guide: F-Series and I-Series
11. Document Revision History for the Intel Agilex® 7 LVDS SERDES User Guide: F-Series and I-Series

5.2. LVDS Interface with External PLL Mode

The LVDS SERDES IP parameter editor provides an option to implement the LVDS interface with the Use External PLL option. With this option turned on you can control the PLL settings, such as dynamically reconfiguring the PLL to support different data rates, dynamic phase shift, and other settings.

If you enable the Use External PLL option with the LVDS SERDES IP core transmitter and receiver, the following signals are required from the IOPLL Intel® FPGA IP:

  • Serial clock (fast clock) input to the SERDES of the LVDS SERDES IP transmitter and receiver
  • Load enable to the SERDES of the LVDS SERDES IP transmitter and receiver
  • Parallel clock (core clock) used to clock the transmitter FPGA fabric logic and parallel clock used for the receiver
  • Asynchronous PLL reset port of the LVDS SERDES IP receiver
  • PLL VCO signal for the DPA and soft-CDR modes of the LVDS SERDES IP receiver

The Clock Resource Summary tab in the LVDS SERDES IP parameter editor provides the details for the signals in the preceding list.

You must instantiate an IOPLL IP to generate the various clocks and load enable signals. Configure these settings in the IOPLL IP parameter editor:

  • In the Settings tab, select Enable LVDS_CLK/LOADEN 0 & 1 for the Access to PLL LVDS_CLK/LOADEN output port parameter.
  • In the PLL tab:
    • Set the Output Clocks settings.
    • Select the Compensation Mode according to the following table.
Table 26.  Compensation Mode Setting to Generate IOPLL IPWhen you generate the IOPLL IP, use the PLL compensation mode in this table for the corresponding LVDS functional mode.
LVDS Functional Mode IOPLL IP Compensation Mode
TX, RX DPA, RX Soft-CDR direct
RX non-DPA lvds

Section Content
IOPLL IP Signal Interface with LVDS SERDES IP
IOPLL Parameter Values for External PLL Mode
Connection between IOPLL IP and LVDS SERDES IP in External PLL Mode

Level Two Title