F-Tile Low Latency Ethernet 10G MAC Intel® FPGA IP Design Example User Guide

ID 720987
Date 4/01/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.2.2. Design Example Parameters

Table 4.  Parameters in the Example Design Tab
Parameter Description
Select Design Available example designs for the IP parameter settings. When you select an example design from the Preset library, this field shows the selected design.
Example Design Files

The files to generate for the different development phase.

  • Simulation—generates the necessary files for simulating the example design.
  • Synthesis—generates the synthesis files. Use these files to compile the design in the Intel® Quartus® Prime Pro Edition software for hardware testing and perform static timing analysis.
Generate File Format The format of the RTL files for simulation—Verilog or VHDL.
Select Board Supported hardware for design implementation. When you select an Intel FPGA development board, the Target Device is the one that matches the device on the Development Kit.

If this menu is not available, there is no supported board for the options that you select.

Agilex I-Series Transceiver-SoC Dev Kit (AGIA027R29A1E2VR0) : This option allows you to test the design example on the selected Intel FPGA IP development kit. This option automatically selects the Target Device to match the device on the Intel® FPGA IP development kit.

None: This option excludes the hardware aspects for the design example.