Low Latency E-Tile 40G Ethernet Intel® FPGA IP Design Example User Guide

ID 683747
Date 7/12/2024
Public

1.1.1. Design Example Parameters

Table 1.  Parameters in the Example Design Tab
Parameter Description
Select Design Available example designs for the IP parameter settings. When you select a design from the Preset library, this field shows the selected design.
Example Design Files

The files to generate for the different development phase.

  • Simulation—generates the necessary files for simulating the example design.
  • Synthesis—generates the synthesis files. Use these files to compile the design in the Quartus® Prime Pro Edition software for hardware testing and perform static timing analysis.
Generate File Format The format of the RTL files for simulation—Verilog or VHDL.
Select Board Supported hardware for design implementation. When you select an Intel development board, the Target Device is the one that matches the device on the Development Kit.

If this menu is not available, there is no supported board for the options that you select.

Intel Agilex 7 F-series Transceiver-SoC Development Kit : This option allows you to test the design example on the selected Intel FPGA IP development kit. This option automatically selects the Target Device of AGFB014R24A2E2VR0. If your board revision has a different device grade, you can change the target device.

Stratix 10 TX E-Tile Transceiver Signal Integrity Development Kit : This option allows you to test the design example on the selected Intel FPGA IP development kit. This option automatically selects the Target Device of 1ST280EY2F55E2VG. If your board revision has a different device grade, you can change the target device.

None: This option excludes the hardware aspects for the design example.