DSP Builder for Intel® FPGAs (Advanced Blockset): Handbook

ID 683337
Date 6/20/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

15.4.18. Constant Multiply (Const Mult)

The Const Mult block scales the input by a user configurable coefficient and outputs the result.

The Value parameter is a floating-point scaling factor that is multiplied by the input signal. If this parameter is a vector, the output is a vector. If both the input and the Value parameter are vectors, they must have the same length. If the Value parameter is complex, the block performs a complex multiply and the output is complex. When used in fixed-point designs, the Simulink simulation of the Const Mult block is only an approximation of the generated hardware. Turn on Bit-accurate simulation to simulate the correct behavior. Implementing this block results in a LUT-based architecture.

Table 177.  Port Interface for the Const Block
Signal Direction Type Description Vector Data Support Complex Data Support
x Input Any fixed- or floating-point type Operand 1 Yes Yes
q Output Any fixed- or floating-point type Result Yes Yes