Video and Vision Processing Suite Intel® FPGA IP User Guide

ID 683329
Date 10/02/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
1. About the Video and Vision Processing Suite 2. Getting Started with the Video and Vision Processing IPs 3. Video and Vision Processing IPs Functional Description 4. Video and Vision Processing IP Interfaces 5. Video and Vision Processing IP Registers 6. Video and Vision Processing IPs Software Programming Model 7. Protocol Converter Intel® FPGA IP 8. 3D LUT Intel® FPGA IP 9. AXI-Stream Broadcaster Intel® FPGA IP 10. Bits per Color Sample Adapter Intel FPGA IP 11. Chroma Key Intel® FPGA IP 12. Chroma Resampler Intel® FPGA IP 13. Clipper Intel® FPGA IP 14. Clocked Video Input Intel® FPGA IP 15. Clocked Video to Full-Raster Converter Intel® FPGA IP 16. Clocked Video Output Intel® FPGA IP 17. Color Space Converter Intel® FPGA IP 18. Deinterlacer Intel® FPGA IP 19. FIR Filter Intel® FPGA IP 20. Frame Cleaner Intel® FPGA IP 21. Full-Raster to Clocked Video Converter Intel® FPGA IP 22. Full-Raster to Streaming Converter Intel® FPGA IP 23. Genlock Controller Intel® FPGA IP 24. Generic Crosspoint Intel® FPGA IP 25. Genlock Signal Router Intel® FPGA IP 26. Guard Bands Intel® FPGA IP 27. Interlacer Intel® FPGA IP 28. Mixer Intel® FPGA IP 29. Pixels in Parallel Converter Intel® FPGA IP 30. Scaler Intel® FPGA IP 31. Stream Cleaner Intel® FPGA IP 32. Switch Intel® FPGA IP 33. Tone Mapping Operator Intel® FPGA IP 34. Test Pattern Generator Intel® FPGA IP 35. Video and Vision Monitor Intel FPGA IP 36. Video Frame Buffer Intel® FPGA IP 37. Video Frame Reader Intel FPGA IP 38. Video Frame Writer Intel FPGA IP 39. Video Streaming FIFO Intel® FPGA IP 40. Video Timing Generator Intel® FPGA IP 41. Warp Intel® FPGA IP 42. Design Security 43. Document Revision History for Video and Vision Processing Suite User Guide

8.2. 3D LUT IP Parameters

The 3D LUT IP offers compile-time parameters.
Table 34.  3D LUT IP compile-time parameters
Name Values Description
Video data format
Number of pixels in parallel 1 to 8 Number of pixels transmitted every clock cycle.
Input bits per color sample 8 to 16 Number of bits per color sample at the input.
Output bits per color sample 8 to 16 Number of bits per color sample at the output.
Control settings
Separate clock for control interface On or off Turn on to run the run-time control interface on a different clock domain.
LUT read interface On or off Allows you to read LUT contents via the CPU interface.
Enabled out of reset On or off
  • Turn on to enable the LUT out of reset
  • Turn off to bypass the LUT out of reset
LUT settings
Size 9, 17, 33, 65 Size of each LUT dimension.
Bits per color 8 to 16 The number of bits per color in the LUT (LUT_DEPTH).
Output alpha channel On or off

Turn on to add alpha channel to the LUT (RGBA).

Bypass alpha 0 to 2 LUT_DEPTH -1 The alpha value output in bypass mode.
Double buffered On or off

Double the memory for seamless LUT programming and switching:

  • On to instantiate the second buffer
  • Off for single buffer only
Buffer 0 and Buffer 1
Initialize from file On or off Turn on to initialize the LUT from the initialization file.
Init file user file Optional initialization file.
Init file type normalized, integer

Type of coefficients in the initialization file:

  • Normalized floating- or fixed-point numbers between 0.0 and 1.0
  • Integer numbers between 0 and 2 LUT_DEPTH -1
Figure 13. 3D LUT GUI

LUT Initialization File

You can initialize each buffer of the LUT from reset by providing a compatible 3D LUT file to Init file in the GUI. The IP generation process converts the LUT file into RAM initialization .hex files that get built into the firmware during compilation. The script can read .cube format files, or any 3D LUT files that follow these conventions:

  • RGB component order (must match the video stream’s order)
  • Components change first from left to right, i.e. R first, G second, B third
  • If you turn on alpha, you append the alpha value as a fourth component (RGBA)
  • The data type must match the IP GUI parameter and may either be:
    • normalized fixed- or floating-point numbers between 0.0 to 1.0
    • integers between 0 and 2LUT_DEPTH-1 (e.g. 10-bit: 0 to 1023)
  • The data type must be the same for the whole file
  • Lines starting with # or any letter are ignored