Visible to Intel only — GUID: mlq1661431489850
Ixiasoft
1. About the Video and Vision Processing Suite
2. Getting Started with the Video and Vision Processing IPs
3. Video and Vision Processing IPs Functional Description
4. Video and Vision Processing IP Interfaces
5. Video and Vision Processing IP Registers
6. Video and Vision Processing IPs Software Programming Model
7. Protocol Converter Intel® FPGA IP
8. 3D LUT Intel® FPGA IP
9. AXI-Stream Broadcaster Intel® FPGA IP
10. Chroma Key Intel® FPGA IP
11. Chroma Resampler Intel® FPGA IP
12. Clipper Intel® FPGA IP
13. Clocked Video Input Intel® FPGA IP
14. Clocked Video to Full-Raster Converter Intel® FPGA IP
15. Clocked Video Output Intel® FPGA IP
16. Color Space Converter Intel® FPGA IP
17. Deinterlacer Intel® FPGA IP
18. FIR Filter Intel® FPGA IP
19. Frame Cleaner Intel® FPGA IP
20. Full-Raster to Clocked Video Converter Intel® FPGA IP
21. Full-Raster to Streaming Converter Intel® FPGA IP
22. Genlock Controller Intel® FPGA IP
23. Generic Crosspoint Intel® FPGA IP
24. Genlock Signal Router Intel® FPGA IP
25. Guard Bands Intel® FPGA IP
26. Interlacer Intel® FPGA IP
27. Mixer Intel® FPGA IP
28. Pixels in Parallel Converter Intel® FPGA IP
29. Scaler Intel® FPGA IP
30. Stream Cleaner Intel® FPGA IP
31. Switch Intel® FPGA IP
32. Tone Mapping Operator Intel® FPGA IP
33. Test Pattern Generator Intel® FPGA IP
34. Video Frame Buffer Intel® FPGA IP
35. Video Streaming FIFO Intel® FPGA IP
36. Video Timing Generator Intel® FPGA IP
37. Warp Intel® FPGA IP
38. Design Security
39. Document Revision History for Video and Vision Processing Suite User Guide
22.4.1. Achieving Genlock Controller Free Running (for Initialization or from Lock to Reference Clock N)
22.4.2. Locking to Reference Clock N (from Genlock Controller IP free running)
22.4.3. Setting the VCXO hold over
22.4.4. Restarting the Genlock Controller IP
22.4.5. Locking to Reference Clock N New (from Locking to Reference Clock N Old)
22.4.6. Changing to Reference Clock or VCXO Base Frequencies (switch between p50 and p59.94 video formats and vice-versa)
22.4.7. Disturbing a Reference Clock (a cable pull)
Visible to Intel only — GUID: mlq1661431489850
Ixiasoft
31.2. Switch IP Parameters
The IP offers compile- and run-time parameters.
Parameter | Values | Description |
---|---|---|
Video Data Format | ||
Intel FPGA streaming video interface type | Full, Lite, Full raster | Select the required streaming video protocol. |
Bits per color sample | 8 to 16 | Select the number of bits per color sample. |
Number of color planes | 1 to 4 | Select the number of color planes per pixel. |
Number of pixels in parallel | 1 to 8 | Select the number of color planes per pixel. |
Switch settings | ||
Number of inputs | 1 to 8 | Select the number of inputs required |
Number of outputs | 1 to 8 | Select the number of outputs required |
Crash switching | On or off | Select the type of switching required. Crash switching may cut short packets. |
Autoconsume inputs | On or off | Turn on to allow inputs to consume automatically during switches if required. |
All inputs are uninterrupted | On or off | For lite variants, turn on only when you can ensure that the start of another field follows each end-of-field. If you turn on for lite variants, the switch occurs at the start-of-field, as indicated by TUSER[0]. If you turn off for lite variants, the IP switch occurs at the end-of-field, as indicated by TUSER[0].. Full variants do not use this parameter, as the switch always occurs at field boundaries. |
‘tready’ signal present on switch streaming interfaces | On or off | For full raster variants only, select if tready signals are present on the switch inputs and output connections |
Control settings | ||
Debug features | On or off | No effect. The Switch IP has no debugging features. |
Separate clock for control interface | On or off | Turn on for a separate clock for the control interface |
Figure 68. Switch IP GUI