Visible to Intel only — GUID: bpz1655476736003
Ixiasoft
1. About the Video and Vision Processing Suite
2. Getting Started with the Video and Vision Processing IPs
3. Video and Vision Processing IPs Functional Description
4. Video and Vision Processing IP Interfaces
5. Video and Vision Processing IP Registers
6. Video and Vision Processing IPs Software Programming Model
7. Protocol Converter Intel® FPGA IP
8. 3D LUT Intel® FPGA IP
9. AXI-Stream Broadcaster Intel® FPGA IP
10. Chroma Key Intel® FPGA IP
11. Chroma Resampler Intel® FPGA IP
12. Clipper Intel® FPGA IP
13. Clocked Video Input Intel® FPGA IP
14. Clocked Video to Full-Raster Converter Intel® FPGA IP
15. Clocked Video Output Intel® FPGA IP
16. Color Space Converter Intel® FPGA IP
17. Deinterlacer Intel® FPGA IP
18. FIR Filter Intel® FPGA IP
19. Frame Cleaner Intel® FPGA IP
20. Full-Raster to Clocked Video Converter Intel® FPGA IP
21. Full-Raster to Streaming Converter Intel® FPGA IP
22. Genlock Controller Intel® FPGA IP
23. Generic Crosspoint Intel® FPGA IP
24. Genlock Signal Router Intel® FPGA IP
25. Guard Bands Intel® FPGA IP
26. Interlacer Intel® FPGA IP
27. Mixer Intel® FPGA IP
28. Pixels in Parallel Converter Intel® FPGA IP
29. Scaler Intel® FPGA IP
30. Stream Cleaner Intel® FPGA IP
31. Switch Intel® FPGA IP
32. Tone Mapping Operator Intel® FPGA IP
33. Test Pattern Generator Intel® FPGA IP
34. Video Frame Buffer Intel® FPGA IP
35. Video Streaming FIFO Intel® FPGA IP
36. Video Timing Generator Intel® FPGA IP
37. Warp Intel® FPGA IP
38. Design Security
39. Document Revision History for Video and Vision Processing Suite User Guide
22.4.1. Achieving Genlock Controller Free Running (for Initialization or from Lock to Reference Clock N)
22.4.2. Locking to Reference Clock N (from Genlock Controller IP free running)
22.4.3. Setting the VCXO hold over
22.4.4. Restarting the Genlock Controller IP
22.4.5. Locking to Reference Clock N New (from Locking to Reference Clock N Old)
22.4.6. Changing to Reference Clock or VCXO Base Frequencies (switch between p50 and p59.94 video formats and vice-versa)
22.4.7. Disturbing a Reference Clock (a cable pull)
Visible to Intel only — GUID: bpz1655476736003
Ixiasoft
24.4. Genlock Signal Router IP Registers
The IP allows runtime configuration of parameters via Avalon memory-mapped processor register interface.
Offset | Register | Access | Description |
Parameterization registers | |||
0x000 | VID_PID | RO | Read this register to retrieve genlock signal router product ID. This register always returns 0x6FA7_0172. |
0x004 | VERSION_NUMBER | RO | Read this register to retrieve the version information for the Intel Quartus release that Intel uses to build this IP. |
0x008 | PULSE_LENGTH | RO | Read this register to retrieve the number of clock cycles the start of frame pulse expects to be asserted high |
0x00C | Reserved | RO | |
0x010 | GENLOCK_INPUTS | RO | Read this register to retrieve the number of input ports |
0x014 | GENLOCK_OUTPUTS | RO | Read this register to retrieve the number of output ports |
0x018 | GENLOCK_OUTPUT_TYPE | RO | Read this register to retrieve the output type interface |
0x01C – 0x098 | INPUT_TYPE_{0 to 31} | RO | Read this register to retrieve the input type interface |
Core Specific Registers | |||
0x100 | GPIO_INPUT | RO | Read this register to retrieve the data loaded in the general-purpose input register |
0x104 | GPIO_OUTPUT | RW | Read this register to retrieve the data loaded in the general-purpose output register. Alternatively, set this register to load a value into it. |
0x180 | OUTPUT_PORT_0 | RW | Sets the configuration parameters for output each of the output ports |
0x184 | OUTPUT_PORT_1 | RW | |
0x188 | OUTPUT_PORT_2 | RW | |
0x18C | OUTPUT_PORT_3 | RW | |
0x190 | OUTPUT_PORT_4 | RW | |
0x194 | OUTPUT_PORT_5 | RW | |
0x198 | OUTPUT_PORT_6 | RW | |
0x19C | OUTPUT_PORT_7 | RW | |
0x1A0 | OUTPUT_PORT_8 | RW | |
0x1A4 | OUTPUT_PORT_9 | RW | |
0x1A8 | OUTPUT_PORT_10 | RW | |
0x1AC | OUTPUT_PORT_11 | RW | |
0x1B0 | OUTPUT_PORT_12 | RW | |
0x1B4 | OUTPUT_PORT_13 | RW | |
0x1B8 | OUTPUT_PORT_14 | RW | |
0x1BC | OUTPUT_PORT_15 | RW | |
0x1C0 | OUTPUT_PORT_16 | RW | |
0x1C4 | OUTPUT_PORT_17 | RW | |
0x1C8 | OUTPUT_PORT_18 | RW | |
0x1CC | OUTPUT_PORT_19 | RW | |
0x1D0 | OUTPUT_PORT_20 | RW | |
0x1D4 | OUTPUT_PORT_21 | RW | |
0x1D8 | OUTPUT_PORT_22 | RW | |
0x1DC | OUTPUT_PORT_23 | RW | |
0x1E0 | OUTPUT_PORT_24 | RW | |
0x1E4 | OUTPUT_PORT_25 | RW | |
0x1E8 | OUTPUT_PORT_26 | RW | |
0x1EC | OUTPUT_PORT_27 | RW | |
0x1E0 | OUTPUT_PORT_28 | RW | |
0x1F4 | OUTPUT_PORT_29 | RW | |
0x1F8 | OUTPUT_PORT_30 | RW | |
0x1FC | OUTPUT_PORT_31 | RW |
Bits | Description |
31:0 | Product Identification Number |
Bits | Description |
31:0 | IP Version Number |
Bits | Description |
31:0 | The number of clocks for the output genlock pulse |
Bits | Description |
31:0 | The number of input ports |
Bits | Description |
31:0 | The number of output ports |
Bits | Description |
31:0 | Type of output interface |
Bits | Description |
31:0 | Type of input interface |
Bits | Description |
31:0 | General-purpose input register |
Bits | Description |
31:0 | General-purpose output register |
Bits | Description |
31 | This field enables the output port |
4:0 | This field selects the input port to route to the output |