Visible to Intel only — GUID: nvp1655476033992
Ixiasoft
Visible to Intel only — GUID: nvp1655476033992
Ixiasoft
13.5. Clocked Video Input IP Registers
Offset | Register | Access | Description |
---|---|---|---|
Parameterization registers | |||
0x000 | VID_PID | RO | Read this register to retrieve clocked video input product ID. This register always returns 0x6FA7_0170. |
0x004 | VERSION_NUMBER | RO | Read this register to retrieve the version information for the Intel Quartus release that Intel uses to build this IP. |
0x008- 0x014 |
RESERVED | RO | |
0x018 | NUMBER OF PIXELS IN PARALLEL | RO | Read this register to determine the number of pixels processed per clock cycle. |
0x01C | NUMBER OF COLOR PLANES | RO | Read this register to determine the number of color planes. |
0x020 | NUMBER OF BITS PER COLOR SAMPLE | RO | Read this register to determine the number of bits per color sample |
0x024 | AXI4-S FR INTERFACE TREADY | RO | Read this register to determine if the full-raster interface includes the TREADY conduit |
0x028 | OUTPUT VIDEO LINE BUFFER DEPTH | RO | Read this register to determine the depth of the output line buffer |
0x02C | VIDEO TELEMETRICS INFORMATION | RO | Read this register to determine if the optional logic to retrieve video timing information was included for this IP |
0x030 | OUTPUT CLOCK FREQUENCY | RO | Read this register to determine the output clock frequency |
Core Specific Registers | |||
0x148 | Control | RW | Sets the IP control mode of operation |
0x14C | Status | RW | Returns the status of the IP |
0x150 | Interrupt_Alarm | RW | Interrupt status and clear bits |
0x154 | Horizontal_sample_count | RO | Returns the detected width count per line of the video streams. |
0x158 | Active_line_count | RO | Returns the detected height count per frame of the video streams excluding blanking. |
0x15C | Total_line_count | RO | Returns the detected height count per frame of the video streams including blanking. |
0x160 | Ref_lock_cfg1 | RW | The IP reference width and height values to assert the video locked signal |
0x164 | Ref_lock_cfg2 | RW | The IP reference number of frames and lines values to assert the video locked signal |
0x168 | Clk_in_freq_count | RO | Returns the detected frequency value of the input clock |
0x16C | Tpg_cfg1 | RW | Configure the value of the color plane 4 and color plane 3 |
0x170 | Tpg_cfg2 | RW | Configure the value of the color plane 2 and color plane 1 |
0x174-0x184 | Reserved | - | |
0x188 | Total_fr_pixel_count | RO | Returns the detected total number of pixels on the input full-raster frame including blanking |
0x18C | Total_active_pixel_count | RO | Return the detected total number of pixels on the input full-raster frame excluding blanking |
0x190 | Fr_pixel_line_count | RO | Returns the detected total number of pixels per line including and excluding blanking. |
0x194 | Hpulse_count | RO | Returns the Hsync width value if the video format uses Sync timing mode, otherwise it returns the total horizontal blanking period. |
0x198 | Hbp_hfp_count | RO | Returns the horizontal back porch width value if the video format uses Sync timing mode, otherwise it returns 0. |
0x19C | f0f1_vfp_count | RO | Returns the vertical front porch value for field 0 and field 1. |
0x1A0 | f0f1_vpulse_count_reg | RO | Returns the Vsync value for field 0 and field 1. |
0x1A4 | f0f1_vbp_count_reg | RO | Returns the vertical back porch value for field 0 and field 1. |
0x1A8 | Hpulse_ref | RW | Reference value for the expected Hsync parameter. 22 |
0x1AC | Hbp_hfp_ref | RW | Reference value for the expected horizontal front and back porch parameters.22 |
0x1B0 | f0f1_vfp_ref | RW | Reference value for the expected vertical front porch parameter. 22 |
0x1B4 | f0f1_vpulse_ref | RW | Reference value for the expected Vsync parameter. 22 |
0x1B8 | f0f1_vbp_ref | RW | Reference value for the expected vertical back porch parameter. 22 |
0x1BC | f0f1_fps_cnt | RO | Returns the number of frames per second value for field 0 and field 1. |
Register Bit Descriptions
Bits | Description |
31:0 | Product Identification Number |
Bits | Description |
31:0 | IP Version Number |
Bits | Description |
31:0 | The number of pixels transmitted every clock cycle. |
Bits | Description |
31:0 | The number of color planes per sample at the input |
Bits | Description |
31:0 | The number of bits per color sample |
Bits | Description |
31:0 | Enable the TREADY signal as part of the full-raster interface |
Bits | Description |
31:0 | The maximum depth of the output video line buffer |
Bits | Description |
31:0 | Enable the video telemetrics information logic |
Bits | Description |
31:0 | The output clock frequency in Hz |
Bits | Name | Description |
23:16 | f0f1_fps_ref_cnt | Setting these bits with the minimum expected number of frames per second values for F0 and F1 enables the automatic detection of interlaced video formats |
7 | ext_locked_ena | Setting this bit enables an external video locked signal to indicate when a stable video stream is present on the input. |
6 | hsync_pol | If auto polarity detection is off, set this bit to override the polarity for the hsync/hpulse signal |
5 | vsync_pol | If auto polarity detection is off, set this bit to override the polarity for the vsync/vpulse signal |
4 | auto_pol_dect | Set this bit to turn on the video sync autopolarity detection. |
3 | mux_out_sel | Set this bit to turn on the output frame cleaner. |
2 | irq2_ena | Set this bit to turn on the end of frame video interrupt. |
1 | irq1_ena | Set this bit to turn on the status update interrupt |
0 | Go bit | Set this bit to 1 to start IP data output on the next video frame boundary. |
Bits | Name | Description |
11 | vid_in_clk_stopped | This bit indicates if the input video clock has stopped working |
10 | fr_interlaced_detected | This bit indicates if the input video format has been autodetected as interlaced video format |
9 | hsync_pol_detc | This bit indicates the detected polarity for the horizontal signal |
8 | vsync_pol_detc | This bit indicates the detected polarity for the vertical signal |
7 | drop_vid | This bit indicates that a frame was not completed |
6 | - | Reserved |
5 | external_vid_locked | This bit indicates if the external video locked has been asserted |
4 | internal_vid_locked | This bit indicates if the external video locked has been asserted |
3 | overflow_sticky | This bit indicates if a FIFO overflow occurs. Writing 1 to this bit clears it |
2 | vid_sync_mode | This bit indicates if the input video frame is using Blank timing or Sync timing |
1 | interlaced_detected | This bit indicates if an interlaced format has been detected |
0 | Status | This bit indicates if the input resolution has changed. |
Bits | Name | Description |
14 | hfp_alarm_sticky | This bit indicates that the reference hfp counter is not matching the actual hfp counter. Set this bit to 1 to clear it. |
13 | hpulse_alarm_sticky | This bit indicates that the reference hpulse counter is not matching the actual hpulse counter. Set this bit to 1 to clear it. |
12 | hbp_alarm_sticky | . This bit indicates that the reference hbp counter is not matching the actual hbp counter. Set this bit to 1 to clear it. |
11 | f0_vfp_alarm_sticky | This bit indicates that the reference vfp counter is not matching the actual vfp counter. Set this bit to 1 to clear it. |
10 | f0_vpulse_alarm_sticky | This bit indicates that the reference vpulse counter is not matching the actual vpulse counter. Set this bit to 1 to clear it. |
9 | f0_vbp_alarm_sticky | . This bit indicates that the reference vbp counter is not matching the actual vbp counter. Set this bit to 1 to clear it. |
8 | f1_vfp_alarm_sticky | This bit indicates that the reference vfp counter is not matching the actual vfp counter. Setting this bit to 1 to clear it. |
7 | f1_vpulse_alarm_sticky | This bit indicates that the reference vpulse counter is not matching the actual vpulse counter. Set this bit to 1 to clear it. |
6 | f1_vbp_alarm_sticky | . This bit indicates that the reference vbp counter is not matching the actual vbp counter. Set this bit to 1 to clear it. |
5 | video_width_alarm_sticky | This bit indicates that the reference width counter is not matching the actual width counter. Set this bit to 1 to clear it. |
4 | video_height_alarm_sticky | This bit indicates that the reference height counter is not matching the actual height counter. Set this bit to 1 to clear it. |
3 | video_frames_alarm_sticky | This bit indicates that the reference frame counter is not matching the actual frame counter. Set this bit to 1 to clear it. |
2 | video_lines_alarm_sticky | This bit indicates that the reference line counter is not matching the actual line counter. Set this bit to 1 to clear it. |
1 | eof_sticky | This bit indicates the end of frame. Set this bit to 1 to clear it. |
0 | irq_status_sticky | This bit indicates a change of input video resolution. Set this bit to 1 to clear it. |
Bits | Description |
31:16 | The total number of pixels per line |
15:0 | The active number of pixels per line |
Bits | Description |
31:16 | The active number of lines for field 0 |
15:0 | The active number of lines for field 1 |
Bits | Description |
31:16 | The total (blanking + active) number of lines for field 0 |
15:0 | The total (blanking + active) number of lines for field 1 |
Bits | Description |
31:16 | The expected output video height to assert video locked signal |
15:0 | The expected output video width to assert video locked signal |
Bits | Description |
31:16 | The number of consecutive valid frames before asserting video locked signal |
15:0 | The number of consecutive valid lines before asserting video locked signal |
Bits | Description |
31:0 | The value of input clock frequency in Hz |
Bits | Description |
31:16 | Pixel value for the color plane # 4 |
15:0 | Pixel value for the color plane # 3 |
Bits | Description |
31:16 | Pixel value for the color plane # 2 |
15:0 | Pixel value for the color plane # 1 |
Bits | Description |
31:0 | Total number of full-raster pixels per frame |
Bits | Description |
31:0 | Total number of actives pixels per frame |
Bits | Description |
31:16 | Full-raster blanking pixels per line |
15:0 | Full-raster blanking lines per frame |
Bits | Description |
31:16 | Total number of active lines per frame |
15:0 | Horizontal (H) counter |
Bits | Description |
31:16 | Horizontal front porch counter |
15:0 | Horizontal back porch counter |
Bits | Description |
31:16 | Vertical front porch counter for field 0 |
15:0 | Vertical front porch counter for field 1 |
Bits | Description |
31:16 | Vertical reference for field 0 |
15:0 | Vertical counter for field 1 |
Bits | Description |
31:16 | Vertical back porch counter for field 0 |
15:0 | Vertical back porch counter for field 1 |
Bits | Description |
15:0 | Horizontal (H) reference counter |
Bits | Description |
31:16 | Horizontal front porch reference counter |
15:0 | Horizontal back porch reference counter |
Bits | Description |
31:16 | Vertical front porch reference counter for field 0 |
15:0 | Vertical front porch reference counter for field 1 |
Bits | Description |
31:16 | Vertical (V) reference counter for field 0 |
15:0 | Vertical (V) reference counter for field 1 |
Bits | Description |
31:16 | Vertical back porch reference counter for field 0 |
15:0 | Vertical back porch reference counter for field 1 |
Bits | Description |
31:16 | Number of frames per second detected for field 0 |
15:0 | Number of frames per second detected for field 1 |