Agilex™ 7 SEU Mitigation User Guide

ID 683128
Date 9/20/2024
Public
Document Table of Contents

4.6.1. Launching and Setting Up the Fault Injection Debugger

To use the Fault Injection Debugger tool, connect it to the device through the JTAG interface and configure the JTAG chain.

  1. From the Quartus® Prime main menu, select Tools > Fault Injection Debugger.
  2. In the Programmer Fault Injection Debugger window, click Hardware Setup.
    The Hardware Setup windows displays the programming hardware connected to your computer.
  3. Select the programming hardware you want to use.
  4. Click Close.
  5. In the Programmer Fault Injection Debugger window, click Auto Detect.
The Auto Detect command populates the device chain with the programmable devices found in the JTAG chain.