Visible to Intel only — GUID: vgo1401246888095
Ixiasoft
1. GTS HDMI Intel® FPGA IP Quick Reference
2. HDMI Overview
3. Release Information
4. GTS HDMI Intel® FPGA IP Getting Started
5. GTS HDMI Intel® FPGA IP Hardware Design Examples
6. HDMI Source
7. HDMI Sink
8. Transceiver Handling (HDMI Wrapper = HDMI and Transceiver)
9. HDMI Parameters
10. HDMI Simulation Example
11. GTS HDMI Intel® FPGA IP User Guide Archives
12. Document Revision History for the GTS HDMI Intel® FPGA IP User Guide
6.1.1. Source Scrambler, TMDS/TERC4 Encoder
6.1.2. Source Video Resampler
6.1.3. Source Window of Opportunity Generator
6.1.4. Source Auxiliary Packet Encoder
6.1.5. Source Auxiliary Packet Generators
6.1.6. Source Auxiliary Data Path Multiplexers
6.1.7. Source Auxiliary Control Port
6.1.8. Source Audio Encoder
6.1.9. TX Core-PHY Interface
6.1.10. I2C Controller
7.1.1. Sink Word Alignment and Channel Deskew
7.1.2. Sink Descrambler, TMDS/TERC4 Decoder
7.1.3. Sink Auxiliary Decoder
7.1.4. Sink Auxiliary Packet Capture
7.1.5. Sink Video Resampler
7.1.6. Sink Auxiliary Data Port
7.1.7. Sink Audio Decoder
7.1.8. Status and Control Data Channel (SCDC) Interface
7.1.9. RX Core-PHY Interface
7.1.10. I2C Target
7.1.11. I2C and EDID RAM Blocks
Visible to Intel only — GUID: vgo1401246888095
Ixiasoft
7.1.3. Sink Auxiliary Decoder
The sink core decodes the auxiliary data path into a 72-bit wide standard packet stream. The stream contains a valid, start-of-packet (SOP) and end-of-packet (EOP) marker.
Figure 33. Auxiliary Data Stream SignalThe figure below shows the relationship between the data bit-field and its clock cycle based on 1-, 2-, or 4-symbol per clock mode.
The data output at EOP contains the received BCH error correcting code. The sink core does not perform any error correction within the core. The auxiliary data is available outside the core.
Note: You can find the bit-field nomenclature in the HDMI 2.0b Specification.
Related Information