GTS HDMI Intel® FPGA IP User Guide

Download PDF
ID 823533
Date 11/25/2024
Public
Document Table of Contents
Document Table of Contents x
1. GTS HDMI Intel® FPGA IP Quick Reference 2. HDMI Overview 3. Release Information 4. GTS HDMI Intel® FPGA IP Getting Started 5. GTS HDMI Intel® FPGA IP Hardware Design Examples 6. HDMI Source 7. HDMI Sink 8. Transceiver Handling (HDMI Wrapper = HDMI and Transceiver) 9. HDMI Parameters 10. HDMI Simulation Example 11. GTS HDMI Intel® FPGA IP User Guide Archives 12. Document Revision History for the GTS HDMI Intel® FPGA IP User Guide
1. GTS HDMI Intel® FPGA IP Quick Reference x
1.1. Terms and Acronyms
3. Release Information x
3.1. Device Family Support 3.2. Feature Support 3.3. Resource Utilization
4. GTS HDMI Intel® FPGA IP Getting Started x
4.1. Installing and Licensing Intel® FPGA IP Cores 4.2. Specifying IP Parameters and Options
4.1. Installing and Licensing Intel® FPGA IP Cores x
4.1.1. Intel® FPGA IP Evaluation Mode
6. HDMI Source x
6.1. Source Functional Description 6.2. Source Interfaces 6.3. Source Clock Tree 6.4. Valid Video Data 6.5. Source Deep Color Implementation
6.1. Source Functional Description x
6.1.1. Source Scrambler, TMDS/TERC4 Encoder 6.1.2. Source Video Resampler 6.1.3. Source Window of Opportunity Generator 6.1.4. Source Auxiliary Packet Encoder 6.1.5. Source Auxiliary Packet Generators 6.1.6. Source Auxiliary Data Path Multiplexers 6.1.7. Source Auxiliary Control Port 6.1.8. Source Audio Encoder 6.1.9. TX Core-PHY Interface 6.1.10. I2C Controller
6.1.7. Source Auxiliary Control Port x
6.1.7.1. Source General Control Packet (GCP) 6.1.7.2. Source Auxiliary Video Information (AVI) InfoFrame Bit-Fields 6.1.7.3. Source HDMI Vendor Specific InfoFrame (VSI)
6.1.8. Source Audio Encoder x
6.1.8.1. Audio InfoFrame (AI) Bundle Bit-Fields 6.1.8.2. Audio Metadata Bundle Bit-Fields
6.1.9. TX Core-PHY Interface x
6.1.9.1. TX Oversampler 6.1.9.2. Clock Enable Generator
7. HDMI Sink x
7.1. Sink Functional Description 7.2. Sink Interfaces 7.3. Sink Clock Tree 7.4. Sink Deep Color Implementation
7.1. Sink Functional Description x
7.1.1. Sink Word Alignment and Channel Deskew 7.1.2. Sink Descrambler, TMDS/TERC4 Decoder 7.1.3. Sink Auxiliary Decoder 7.1.4. Sink Auxiliary Packet Capture 7.1.5. Sink Video Resampler 7.1.6. Sink Auxiliary Data Port 7.1.7. Sink Audio Decoder 7.1.8. Status and Control Data Channel (SCDC) Interface 7.1.9. RX Core-PHY Interface 7.1.10. I2C Target 7.1.11. I2C and EDID RAM Blocks
7.1.6. Sink Auxiliary Data Port x
7.1.6.1. Sink General Control Packet (GCP) 7.1.6.2. Sink Auxiliary Video Information (AVI) InfoFrame Bit-Fields 7.1.6.3. Sink HDMI Vendor Specific InfoFrame (VSI)
7.1.7. Sink Audio Decoder x
7.1.7.1. Audio InfoFrame (AI) Bundle Bit-Fields 7.1.7.2. Audio Metadata Bundle Bit-Fields
7.1.9. RX Core-PHY Interface x
7.1.9.1. RX Oversampler
8. Transceiver Handling (HDMI Wrapper = HDMI and Transceiver) x
8.1. HDMI RX with Integrated Transceiver 8.2. HDMI TX with Integrated Transceiver 8.3. Creating Dual Simplex Groups
9. HDMI Parameters x
9.1. HDMI Source Parameters 9.2. HDMI Sink Parameters
1. GTS HDMI Intel® FPGA IP Quick Reference
2. HDMI Overview
3. Release Information
4. GTS HDMI Intel® FPGA IP Getting Started
5. GTS HDMI Intel® FPGA IP Hardware Design Examples
6. HDMI Source
7. HDMI Sink
8. Transceiver Handling (HDMI Wrapper = HDMI and Transceiver)
9. HDMI Parameters
10. HDMI Simulation Example
11. GTS HDMI Intel® FPGA IP User Guide Archives
12. Document Revision History for the GTS HDMI Intel® FPGA IP User Guide

6.5. Source Deep Color Implementation

You can drive vid_clk regardless of the color depth ratio.

vid_clk frequency = 300 MHz

Figure 27. Deep Color Implementation

The vid_ready signal toggles to indicate if the HDMI TX core is ready to take in new video data. In this case, you can use a DCFIFO IP to store the video data when the HDMI TX core is not ready (vid_ready is low). You need to configure the DCFIFO IP to show-ahead mode, with the vid_ready signal connected to the rden signal of the DCFIFO IP.

When vid_ready is low, the DCFIFO IP holds the video data immediately. When vid_ready goes high, the HDMI TX core processes the stored data without losing any valid video data.

The inverted empty signal from the DCFIFO IP sets the vid_valid signal to the HDMI TX core.

Figure 28. 10 Bits per Component (30 Bits per Pixel)When operating in 10 bits per component, the vid_ready signal is high for 4 out of 5 clock cycles. For every 5 clock cycles, the HDMI TX core processes 4 video data with 10 bits per component.
Figure 29. 12 Bits per Component (36 Bits per Pixel)When operating in 12 bits per component, the vid_ready signal is high for 2 out of 3 clock cycles. For every 3 clock cycles, the HDMI TX core processes 2 video data with 12 bits per component.
Figure 30. 16 Bits per Component (48 Bits per Pixel)When operating in 16 bits per component, the vid_ready signal is high for 1 out of 2 clock cycles. For every 2 clock cycles, the HDMI TX core processes 1 video data with 16 bits per component.
Level Two Title