Visible to Intel only — GUID: fzt1596592298810
Ixiasoft
1. GTS HDMI Intel® FPGA IP Quick Reference
2. HDMI Overview
3. Release Information
4. GTS HDMI Intel® FPGA IP Getting Started
5. GTS HDMI Intel® FPGA IP Hardware Design Examples
6. HDMI Source
7. HDMI Sink
8. Transceiver Handling (HDMI Wrapper = HDMI and Transceiver)
9. HDMI Parameters
10. HDMI Simulation Example
11. GTS HDMI Intel® FPGA IP User Guide Archives
12. Document Revision History for the GTS HDMI Intel® FPGA IP User Guide
6.1.1. Source Scrambler, TMDS/TERC4 Encoder
6.1.2. Source Video Resampler
6.1.3. Source Window of Opportunity Generator
6.1.4. Source Auxiliary Packet Encoder
6.1.5. Source Auxiliary Packet Generators
6.1.6. Source Auxiliary Data Path Multiplexers
6.1.7. Source Auxiliary Control Port
6.1.8. Source Audio Encoder
6.1.9. TX Core-PHY Interface
6.1.10. I2C Controller
7.1.1. Sink Word Alignment and Channel Deskew
7.1.2. Sink Descrambler, TMDS/TERC4 Decoder
7.1.3. Sink Auxiliary Decoder
7.1.4. Sink Auxiliary Packet Capture
7.1.5. Sink Video Resampler
7.1.6. Sink Auxiliary Data Port
7.1.7. Sink Audio Decoder
7.1.8. Status and Control Data Channel (SCDC) Interface
7.1.9. RX Core-PHY Interface
7.1.10. I2C Target
7.1.11. I2C and EDID RAM Blocks
Visible to Intel only — GUID: fzt1596592298810
Ixiasoft
7.1.9.1. RX Oversampler
The HDMI design requires oversampling on the RX side in case the data received is below the minimum data rate of the transceiver at 1 Gb/s.
The oversampling factor on the RX is set to 5. For example, a video resolution with TMDS Bit Rates of 742.5 Mb/s should configure the transceiver to operate at 5 times its data rate, which is 3.7125 Gb/s.
Figure 36. RX Oversampler Block