Clocking and PLL User Guide: Agilex™ 5 FPGAs and SoCs

Download PDF
ID 813671
Date 10/07/2024
Public
Document Table of Contents
Document Table of Contents x
1. Agilex™ 5 Clocking and PLL Overview 2. Agilex™ 5 Clocking and PLL Architecture and Features 3. Agilex™ 5 Clocking and PLL Design Considerations 4. Clock Control Intel® FPGA IP Core 5. IOPLL Intel® FPGA IP Core 6. I/O PLL Reconfiguration 7. Document Revision History for the Clocking and PLL User Guide: Agilex™ 5 FPGAs and SoCs
1. Agilex™ 5 Clocking and PLL Overview x
1.1. Clock Networks Overview 1.2. PLLs Overview
2. Agilex™ 5 Clocking and PLL Architecture and Features x
2.1. Clock Networks Architecture and Features 2.2. PLLs Architecture and Features
2.1. Clock Networks Architecture and Features x
2.1.1. Clock Network Architecture 2.1.2. Clock Resources 2.1.3. Clock Control Features
2.1.1. Clock Network Architecture x
2.1.1.1. Clock Network Hierarchy 2.1.1.2. Clock Sectors 2.1.1.3. Programmable Clock Routing
2.1.3. Clock Control Features x
2.1.3.1. Clock Gating 2.1.3.2. Clock Divider
2.1.3.1. Clock Gating x
2.1.3.1.1. Root Clock Gate 2.1.3.1.2. Sector Clock Gate 2.1.3.1.3. I/O PLL Clock Gate 2.1.3.1.4. LAB Clock Gate
2.2. PLLs Architecture and Features x
2.2.1. PLL Features 2.2.2. PLL Usage 2.2.3. PLL Locations 2.2.4. PLL Architecture 2.2.5. PLL Control Signals 2.2.6. PLL Feedback Modes 2.2.7. Clock Multiplication and Division Pre-Scale Counter, N and Multiply Counter, M Post-Scale Counter, C Integer Mode 2.2.8. Programmable Phase Shift 2.2.9. Programmable Duty Cycle 2.2.10. PLL Cascading 2.2.11. PLL Input Clock Switchover 2.2.12. PLL Reconfiguration and Dynamic Phase Shift 2.2.13. PLL Calibration
2.2.5. PLL Control Signals x
2.2.5.1. Reset 2.2.5.2. Locked
2.2.6. PLL Feedback Modes x
2.2.6.1. Direct Compensation Mode 2.2.6.2. LVDS Compensation Mode 2.2.6.3. Source Synchronous Compensation Mode 2.2.6.4. Normal Compensation Mode 2.2.6.5. Zero-Delay Buffer Mode 2.2.6.6. External Feedback Mode
2.2.11. PLL Input Clock Switchover x
2.2.11.1. Automatic Switchover 2.2.11.2. Automatic Switchover with Manual Override 2.2.11.3. Manual Clock Switchover
2.2.13. PLL Calibration x
2.2.13.1. Power-Up Calibration 2.2.13.2. User Calibration 2.2.13.3. Static Phase Error Calibration
3. Agilex™ 5 Clocking and PLL Design Considerations x
3.1. Guidelines: Clock Switchover 3.2. Guidelines: Timing Closure 3.3. Guidelines: Resetting the PLL 3.4. Guidelines: Configuration Constraints 3.5. Clocking Constraints 3.6. IP Core Constraints 3.7. Guideline: Achieving 5% Duty Cycle for fOUT_EXT ≥ 300 MHz Using tx_outclk Port from LVDS SERDES Intel® FPGA IP
4. Clock Control Intel® FPGA IP Core x
4.1. Release Information for Clock Control Intel® FPGA IP 4.2. Clock Control IP Core Parameters 4.3. Clock Control IP Core Ports and Signals
5. IOPLL Intel® FPGA IP Core x
5.1. Release Information for IOPLL Intel® FPGA IP Core 5.2. IOPLL IP Core Parameters 5.3. IOPLL IP Core Ports and Signals
5.2. IOPLL IP Core Parameters x
5.2.1. IOPLL IP Core Parameters - PLL Tab 5.2.2. IOPLL IP Core Parameters - Settings Tab 5.2.3. IOPLL IP Core Parameters - Cascading Tab 5.2.4. IOPLL IP Core Parameters - Advanced Parameters Tab
6. I/O PLL Reconfiguration x
6.1. Release Information for EMIF Calibration IP 6.2. Implementing HSIO I/O PLL Reconfiguration using EMIF Calibration IP 6.3. Implementing HVIO I/O PLL Reconfiguration 6.4. Reconfiguration Guideline for I/O PLLs 6.5. Axilite Interface Ports in the EMIF Calibration IP 6.6. Address Bus and Data Bus Settings 6.7. Design Example
6.2. Implementing HSIO I/O PLL Reconfiguration using EMIF Calibration IP x
6.2.1. Setting Up the IOPLL Intel® FPGA IP 6.2.2. Setting Up the EMIF Calibration IP 6.2.3. Connectivity Between IOPLL and EMIF Calibration IP
6.3. Implementing HVIO I/O PLL Reconfiguration x
6.3.1. Setting Up the IOPLL Intel® FPGA IP 6.3.2. Read and Write Operations
6.4. Reconfiguration Guideline for I/O PLLs x
6.4.1. Enabling Reconfiguration for The Desired I/O PLL 6.4.2. Clearing off Calibration Statuses 6.4.3. Reconfiguring The I/O PLL 6.4.4. Recalibration of I/O PLL 6.4.5. Clock Gating (Optional)
6.6. Address Bus and Data Bus Settings x
6.6.1. Divide Settings and the Corresponding Data Bit Setting for Reconfiguration 6.6.2. Data Bus Setting for Clock Gating Reconfiguration 6.6.3. Data Bus Setting For Charge Pump Current
6.7. Design Example x
6.7.1. Reconfiguration Option: Reconfiguration Through EMIF Calibration IP 6.7.2. Reconfiguration Option: Reconfiguration Through HVIO Interfaces 6.7.3. Reconfiguration Option: Clock Gating Reconfiguration
1. Agilex™ 5 Clocking and PLL Overview
2. Agilex™ 5 Clocking and PLL Architecture and Features
3. Agilex™ 5 Clocking and PLL Design Considerations
4. Clock Control Intel® FPGA IP Core
5. IOPLL Intel® FPGA IP Core
6. I/O PLL Reconfiguration
7. Document Revision History for the Clocking and PLL User Guide: Agilex™ 5 FPGAs and SoCs

2.2.7. Clock Multiplication and Division

An Agilex™ 5 PLL output frequency is related to its input reference clock source by the scale factor: M/(N × C) for I/O PLL.

The input clock is divided by a pre-scale factor, N, and is then multiplied by the M feedback factor. The control loop drives the VCO to match fin × (M/N). When using non-dedicated feedback path in normal or source synchronous compensation mode, the control loop drives the VCO to match fin × ((M × Ci )/N), where Ci is the compensated outclk C counter value. The Quartus® Prime software automatically chooses the appropriate scale factors according to the input frequency, multiplication, and division values that you specify in the parameter editor for the IP.

Pre-Scale Counter, N and Multiply Counter, M

Each PLL has one pre-scale counter, N, and one multiply counter, M. The M and N counters do not use duty-cycle control because the only purpose of these counters is to calculate frequency division.

Post-Scale Counter, C

Each output port has a unique post-scale counter, C. For multiple C counter outputs with different frequencies, the VCO is set to the least common multiple of the output frequencies that meets its frequency specifications. For example, if the output frequencies required from one I/O PLL are 55 MHz and 100 MHz, the Quartus® Prime software sets the VCO frequency to 1.1 GHz (the least common multiple of 55 MHz and 100 MHz within the VCO operating frequency range). Then the post-scale counters, C, scale down the VCO frequency for each output port.

Integer Mode

The I/O PLL can only operate in integer mode.

Level Two Title