Nios® V Embedded Processor Design Handbook

ID 726952
Date 5/26/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

5.4.1. Hardware and Software Requirements

To use a µC/OS-II and µC/TCP-IP program on an Intel FPGA requires the following hardware and software:
  • Intel® Quartus® Prime software
    • Intel® Quartus® Prime Pro Edition software version 21.3 or later
    • Intel® Quartus® Prime Standard Edition software version 22.1 or later
  • Ashling* RiscFree* IDE for Intel FPGAs software version 22.2 or later
    Note: Intel recommends you to install the same software version for all softwares.
  • One of the supported Intel FPGA devices
    • The example designs are implemented on Intel® Arria® 10 10 SoC development kit
  • Intel FPGA Download Cable II
  • RJ-45 connected Ethernet cable on the same network as the PC development host

You must connect your development board to a host PC on the Ethernet and USB/JTAG ports.