F-Tile Low Latency Ethernet 10G MAC Intel® FPGA IP Design Example User Guide

Download PDF
ID 720987
Date 11/29/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About the F-Tile Low Latency Ethernet 10G MAC Intel® FPGA IP Design Example User Guide 2. Quick Start Guide 3. 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example 4. Interface Signals Description 5. Configuration Registers Description 6. F-Tile Low Latency Ethernet 10G MAC Intel FPGA IP Design Example User Guide Archives 7. Document Revision History for the F-Tile Low Latency Ethernet 10G MAC Intel® FPGA IP Design Example User Guide
2. Quick Start Guide x
2.1. Directory Structure 2.2. Generating the Design 2.3. Compiling and Simulating the Design 2.4. Compiling and Testing the Design in Hardware
2.2. Generating the Design x
2.2.1. Procedure 2.2.2. Design Example Parameters
2.3. Compiling and Simulating the Design x
2.3.1. Procedure 2.3.2. Testbench
2.4. Compiling and Testing the Design in Hardware x
2.4.1. Procedure 2.4.2. Hardware Setup
3. 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example x
3.1. Features 3.2. Hardware and Software Requirements 3.3. Functional Description 3.4. Simulation 3.5. Hardware Testing 3.6. Interface Signals 3.7. Configuration Registers
3.3. Functional Description x
3.3.1. Design Components 3.3.2. Clocking Scheme 3.3.3. Reset Scheme
3.4. Simulation x
3.4.1. Test Case—Design Example with the IEEE 1588v2 Feature 3.4.2. Test Case—Design Example without the IEEE 1588v2 Feature
3.5. Hardware Testing x
3.5.1. Test Procedure 3.5.2. Design Constraints
4. Interface Signals Description x
4.1. Clock and Reset Interface Signals 4.2. Avalon® Memory-Mapped Interface Signals 4.3. Avalon® Streaming Interface Signals 4.4. PHY Interface Signals 4.5. Status Interface 4.6. IEEE 1588v2 Timestamp Interface Signals 4.7. Packet Classifier Interface Signals 4.8. TOD Interface Signals
5. Configuration Registers Description x
5.1. Register Access Definition 5.2. Low Latency Ethernet 10G MAC 5.3. PHY 5.4. TOD
5.3. PHY x
5.3.1. 1G/2.5G/5G/10G Multi-rate PHY
1. About the F-Tile Low Latency Ethernet 10G MAC Intel® FPGA IP Design Example User Guide
2. Quick Start Guide
3. 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example
4. Interface Signals Description
5. Configuration Registers Description
6. F-Tile Low Latency Ethernet 10G MAC Intel FPGA IP Design Example User Guide Archives
7. Document Revision History for the F-Tile Low Latency Ethernet 10G MAC Intel® FPGA IP Design Example User Guide

3.5.2. Design Constraints

The following is the current constraint statements in the project .qsf file: 
set_global_assignment -name PWRMGT_SLAVE_DEVICE_TYPE ED8401
set_global_assignment -name PWRMGT_LINEAR_FORMAT_N "-13"
You must replace the constraint statements in the project .qsf file if you are using the following version of the Intel Agilex® 7 I-Series Transceiver SoC development kit:
Table 8.  Required Design Constraint Statements in the Project .qsf
Serial Number ID Constraint Statements Required in the Project .qsf Action Required
2000001 
set_global_assignment -name PWRMGT_SLAVE_DEVICE_TYPE LTC3888 
set_global_assignment -name PWRMGT_LINEAR_FORMAT_N "-12"
 Replace the current constraints in the QSF file with these constraints.

Refer to Intel Agilex® 7 FPGA I-Series Transceiver-SoC Development Kit User Guide for more information on the Intel Agilex® 7 I-Series Transceiver-SoC development kit and their respective serial number identifier.

Related Information
Level Two Title