F-Tile Low Latency Ethernet 10G MAC Intel® FPGA IP Design Example User Guide

Download PDF
ID 720987
Date 11/29/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About the F-Tile Low Latency Ethernet 10G MAC Intel® FPGA IP Design Example User Guide 2. Quick Start Guide 3. 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example 4. Interface Signals Description 5. Configuration Registers Description 6. F-Tile Low Latency Ethernet 10G MAC Intel FPGA IP Design Example User Guide Archives 7. Document Revision History for the F-Tile Low Latency Ethernet 10G MAC Intel® FPGA IP Design Example User Guide
2. Quick Start Guide x
2.1. Directory Structure 2.2. Generating the Design 2.3. Compiling and Simulating the Design 2.4. Compiling and Testing the Design in Hardware
2.2. Generating the Design x
2.2.1. Procedure 2.2.2. Design Example Parameters
2.3. Compiling and Simulating the Design x
2.3.1. Procedure 2.3.2. Testbench
2.4. Compiling and Testing the Design in Hardware x
2.4.1. Procedure 2.4.2. Hardware Setup
3. 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example x
3.1. Features 3.2. Hardware and Software Requirements 3.3. Functional Description 3.4. Simulation 3.5. Hardware Testing 3.6. Interface Signals 3.7. Configuration Registers
3.3. Functional Description x
3.3.1. Design Components 3.3.2. Clocking Scheme 3.3.3. Reset Scheme
3.4. Simulation x
3.4.1. Test Case—Design Example with the IEEE 1588v2 Feature 3.4.2. Test Case—Design Example without the IEEE 1588v2 Feature
3.5. Hardware Testing x
3.5.1. Test Procedure 3.5.2. Design Constraints
4. Interface Signals Description x
4.1. Clock and Reset Interface Signals 4.2. Avalon® Memory-Mapped Interface Signals 4.3. Avalon® Streaming Interface Signals 4.4. PHY Interface Signals 4.5. Status Interface 4.6. IEEE 1588v2 Timestamp Interface Signals 4.7. Packet Classifier Interface Signals 4.8. TOD Interface Signals
5. Configuration Registers Description x
5.1. Register Access Definition 5.2. Low Latency Ethernet 10G MAC 5.3. PHY 5.4. TOD
5.3. PHY x
5.3.1. 1G/2.5G/5G/10G Multi-rate PHY
1. About the F-Tile Low Latency Ethernet 10G MAC Intel® FPGA IP Design Example User Guide
2. Quick Start Guide
3. 10M/100M/1G/2.5G/5G/10G (USXGMII) Ethernet Design Example
4. Interface Signals Description
5. Configuration Registers Description
6. F-Tile Low Latency Ethernet 10G MAC Intel FPGA IP Design Example User Guide Archives
7. Document Revision History for the F-Tile Low Latency Ethernet 10G MAC Intel® FPGA IP Design Example User Guide

4.1. Clock and Reset Interface Signals

Table 10.  Clock and Reset Interface Signals
Signal Direction Width Description
csr_clk In 1 125 MHz configuration clock for the Avalon® memory-mapped interface and core logic.
i_reconfig_reset In 1 Active-low reset signal for the Avalon® memory-mapped interface.
i_tx_rst_n In 1 Active-low reset signal for the TX datapath.
i_rx_rst_n In 1 Active-low reset signal for the RX datapath.

mac64b_clk

mac32b_clk

Out 1 156.25 MHz and 312.5 MHz configuration clock for the Avalon® streaming interface and 0 ppm frequency difference with refclk.
refclk_10g In 1 156.25 MHz reference clock for the System PLL.
reset In 1 Assert this asynchronous and active-high signal to reset the whole design example.
tx_digitalreset Out [NUM_CHANNELS] Asynchronous and active-high signal to reset PCS TX portion of the transceiver PHY.
rx_digitalreset Out [NUM_CHANNELS] Asynchronous and active-high signal to reset PCS RX portion of the transceiver PHY.
Level Two Title