F-Tile Dynamic Reconfiguration Design Example User Guide

ID 710582
Date 4/03/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

7. Document Revision History for F-Tile Dynamic Reconfiguration Design Example User Guide

Document Version Intel® Quartus® Prime Version Changes
2023.04.03 23.1
  • Added new base variant for the Ethernet to CPRI Protocol in section: Quick Start Guide.
    • 25G-1 with RS-FEC with 1GE
  • Updated Ethernet to CPRI Example Design Tab image in Ethernet to CPRI Design Example Parameters.
  • Added Example Design Files parameter value: Synthesis in Ethernet to CPRI Design Example Parameters.
  • Added new base variant for the Ethernet to CPRI Protocol in section: Ethernet to CPRI Design Example: Functional Description.
  • Added new image Simulation Testbench Block Diagram for Ethernet to CPRI Dynamic Reconfiguration Design Example (with 1GE).
  • Added Address Map for Ethernet to CPRI Variant (with 1GE) in Ethernet to CPRI Design Example: Registers.
  • Updated the product family name to "Intel Agilex 7."
2022.12.19 22.4 Added the following:
  • Hardware Design Example File Descriptions for Ethernet to CPRI Multirate Designs in Directory Structure.
  • Step 4 note in Testing the Hardware Design Example.
  • Ethernet Multirate Hardware Design Example Block Diagram for 400GE-4 FHT Base Variant in Ethernet Multirate Hardware Design Example.
  • Address Map for 400GE-4 FHT Base Variant in Ethernet Multirate Design Example: Registers.
  • PMA/FEC Direct PHY Multirate Hardware Design Example Block Diagram: 400G-8 Base Variant in PMA/FEC Direct PHY Multirate Hardware Design Example.
  • Updated Ethernet to CPRI simulation testbench block diagram in Ethernet to CPRI Dynamic Reconfiguration Design Example: Simulation TestBench
  • Added Ethernet to CPRI Dynamic Reconfiguration Hardware Design Example.
  • Added address map for Ethernet to CPRI variant in Ethernet to CPRI Design Example: Registers.
2022.09.26 22.3
  • Added new Ethernet base variant in section: Quick Start Guide.
    • FHT 400G-4 with RS-FEC
  • Added new base variants for the Ethernet to CPRI Protocol in section: Quick Start Guide.
    • 25G-1 RS-FEC
  • Added FHT 400G-4 base variant for Ethernet IP protocol.
  • Updated hardware flow design example steps in Ethernet Multirate Hardware Design Example.
  • Added simulation testbench block diagram for 400G-4 FHT Base variant in Ethernet Multirate Design Example: Simulation Testbench.
  • Added multirate hardware design example block diagram for the following PTP Base Variants:
    • 25GE-1 with PTP
    • 100GE-4 with PTP
    • 400GE-8 with PTP
  • Added new topic: Ethernet to CPRI Design Example Parameters in Generating the Design section.
  • Added Key Testbench and Simulation Files for Ethernet to CPRI Multirate Designs in Directory Structure section.
  • Added simulation test run results for the Ethernet to CPRI design example testbench in section Simulating the Design Example Testbench.
  • Updated the PMA/FEC Direct PHY Multirate Hardware Design Example section with steps for the hardware flow.
  • Updated the PMA/FEC Direct PHY Multirate Design Example: Registers section with address map for 400G-8 base variant.
  • Added new section: Detailed Description for Ethernet to CPRI Protocol Dynamic Reconfiguration Design Example.
2022.06.21 22.2
  • Updated the Supported Configuration table in section: Quick Start Guide:
    • Added new base variants for the Ethernet and PMA/FEC Direct PHY IP protocol.
      • Ethernet base variants:
        • 100G-4 with RS-FEC and PTP
        • 25G-1 with RS-FEC and PTP
        • 400G-8 with RS-FEC and PTP
      • PMA/FEC Direct PHY base variant: 400G-8 with RS-FEC
    • Added corresponding new information in section: Detailed Description for Ethernet Multirate Design Example and Detailed Description for PMA/FEC Direct PHY Multirate Design Example.
  • Updated the Select Base Variant parameter in section: Ethernet Multirate Design Example Parameters.
  • Updated the following PMA/FEC Direct PHY Multirate Design Example Parameters:
    • Select Base Variant
    • Generated File Format
    • Target Development Kit
  • Added hardware support for 400G-8 base variant of the Ethernet Multirate Designs.
  • Added hardware support for 50G-1 base variant of the PMA/FEC Direct PHY Multirate Designs.
    • Added new section: PMA/FEC Direct PHY Multirate Hardware Design Example.
  • Updated the Ethernet Multirate Design Example: Registers section with 400G-8 base variant address map.
2022.03.28 22.1
  • Updated the Supported Configuration table in Quick Start Guide:
    • Added new target variants for the Ethernet 100GE-1 base variant
    • Added 400GE-8 base variant for Ethernet IP protocol
    • Added 50G-1 base variant for PMA/FEC direct IP protocol
  • Removed support for the ModelSim* SE simulator.
  • Updated Ethernet Multirate Design Example Parameters to include 400G-8 base variant and the dev kit support.
  • Updated steps in section: Simulating the Design Example Testbench.
  • Updated Directory Structure:
    • Added PMA/FEC Direct PHY-specific testbench files
    • Added Ethernet-specific hardware design example files
  • Added new figure: Simulation Testbench Block Diagram for 400GE-8 Base Variant
  • Added hardware support for the Ethernet Multirate Design Example.
  • Added support for PMA/FEC Direct PHY Multirate design example.
2022.01.07 21.4
  • Added support for Ethernet Multirate design example.
  • Added support for the Xcelium* simulator.
  • Added hardware support for the CPRI Multirate Design Example.
  • Updated the Simulation Testbench Block Diagram and the customization instructions in section: CPRI Multirate Design Example: Simulation Testbench.
  • Updated the address range in section: CPRI Multirate Design Example: Registers.
2021.11.17 21.3 Initial release.