Visible to Intel only — GUID: csl1574304721827
Ixiasoft
3.4.1. Setting Up the Hardware
The first stage of the demonstration is hardware setup.
To set up the hardware, follow these steps:
- Connect the Bitec DisplayPort FMC daughter card (revision 8C) to the Agilex™ 7 development kit at FMC port A.
- Connect the Agilex™ 7 development kit to your PC using a USB cable.
- Connect a DisplayPort cable from the DisplayPort RX connector on the Bitec DisplayPort FMC daughter card to an HDCP-enabled DisplayPort device, such as a graphic card with DisplayPort output.
- Connect another DisplayPort cable from the DisplayPort TX connector on the Bitec DisplayPort FMC daughter card to an HDCP-enabled DisplayPort device, such as a display monitor with DisplayPort input.