Visible to Intel only — GUID: qdl1600688203958
Ixiasoft
1. Intel® Stratix® 10 SEU Mitigation Overview
2. Intel® Stratix® 10 Mitigation Techniques for CRAM
3. Secure Device Manager ECC Error Detection
4. Intel® Stratix® 10 SEU Mitigation Implementation Guides
5. Advanced SEU Detection Intel® FPGA IP References
6. Intel® Stratix® 10 Fault Injection Debugger References
7. Intel® Stratix® 10 SEU Mitigation User Guide Archives
8. Document Revision History for the Intel® Stratix® 10 SEU Mitigation User Guide
4.1. Setting SEU_ERROR Pin
4.2. Intel® Quartus® Prime SEU Software Settings
4.3. Enabling Priority Scrubbing
4.4. Performing Hierarchy Tagging
4.5. Programming Sensitivity Map Header File into Memory
4.6. Performing Lookup for Sensitivity Map Header
4.7. Using the Fault Injection Debugger
4.8. Analyzing SEU Errors Using Signal Tap
4.9. Intel® Quartus® Prime Software SEU FIT Reports
Visible to Intel only — GUID: qdl1600688203958
Ixiasoft
4.7.2. Launching and Setting Up the Fault Injection Debugger
To use the Fault Injection Debugger, connect the tool to the device via the JTAG interface and configure the JTAG chain.
- From the main menu in the Intel® Quartus® Prime software, select Tools > Fault Injection Debugger.
- In the Programmer Fault Injection Debugger window, click Hardware Setup.
The Hardware Setup window displays the programming hardware connected to your computer.
- Select the programming hardware you want to use.
- Click Close.
- In the Programmer Fault Injection Debugger window, click Auto Detect.
The command populates the device chain with the programmable devices found in the JTAG chain.