Visible to Intel only — GUID: xtl1617351076375
Ixiasoft
1. Intel® Stratix® 10 SEU Mitigation Overview
2. Intel® Stratix® 10 Mitigation Techniques for CRAM
3. Secure Device Manager ECC Error Detection
4. Intel® Stratix® 10 SEU Mitigation Implementation Guides
5. Advanced SEU Detection Intel® FPGA IP References
6. Intel® Stratix® 10 Fault Injection Debugger References
7. Intel® Stratix® 10 SEU Mitigation User Guide Archives
8. Document Revision History for the Intel® Stratix® 10 SEU Mitigation User Guide
4.1. Setting SEU_ERROR Pin
4.2. Intel® Quartus® Prime SEU Software Settings
4.3. Enabling Priority Scrubbing
4.4. Performing Hierarchy Tagging
4.5. Programming Sensitivity Map Header File into Memory
4.6. Performing Lookup for Sensitivity Map Header
4.7. Using the Fault Injection Debugger
4.8. Analyzing SEU Errors Using Signal Tap
4.9. Intel® Quartus® Prime Software SEU FIT Reports
Visible to Intel only — GUID: xtl1617351076375
Ixiasoft
4.7.6.2. Injecting Double Adjacent Errors: GUI with Tcl Console
Before you begin, set up the Fault Injection Debugger tool and configure your device using a .sof.
- From the Intel® Quartus® Prime menu, select View > TCL Console.
- In the Tcl Console, run the injection command with the following syntax:
injection -user "@1=<sector_location> <frame_location> <bit_location> + <frame_location> <bit_location>"
For example: injection -user "@1=0x19 0x192 0x010 + 0x192 0x011" - In the Fault Injection Debugger window, click Read EMR to read the error message.