Visible to Intel only — GUID: sam1403479624359
Ixiasoft
2.1. I/O Standards and Voltage Levels in Intel® Stratix® 10 Devices
2.2. I/O Element Structure in Intel® Stratix® 10 Devices
2.3. Programmable IOE Features in Intel® Stratix® 10 Devices
2.4. On-Chip I/O Termination in Intel® Stratix® 10 Devices
2.5. External I/O Termination for Intel® Stratix® 10 Devices
3.1. Guideline: VREF Sources and VREF Pins
3.2. Guideline: Observe Device Absolute Maximum Rating for 3.0 V Interfacing
3.3. Guideline: Voltage-Referenced and Non-Voltage Referenced I/O Standards
3.4. Guideline: Do Not Drive I/O Pins During Power Sequencing
3.5. Guideline: Intel® Stratix® 10 I/O Buffer During Power Up, Configuration, and Power Down
3.6. Guideline: Maximum DC Current Restrictions
3.7. Guideline: Use Only One Voltage for All 3 V I/O Banks
3.8. Guideline: I/O Standards Limitation for Intel® Stratix® 10 TX 400
3.9. Guideline: I/O Standards Limitation for Intel® Stratix® 10 GX 400 and SX 400
Visible to Intel only — GUID: sam1403479624359
Ixiasoft
4.5. Verifying Pin Migration Compatibility
You can use the Pin Migration View window in the Intel® Quartus® Prime software Pin Planner to assist you in verifying whether your pin assignments migrate to a different device successfully. You can vertically migrate to a device with a different density while using the same device package, or migrate between packages with different densities and ball counts.
- Open Assignments > Pin Planner and create pin assignments.
- If necessary, perform one of the following options to populate the Pin Planner with the node names in the design:
- Analysis & Elaboration
- Analysis & Synthesis
- Fully compile the design
- Then, on the menu, click View > Pin Migration View.
- To select or change migration devices:
- Click Device to open the Device dialog box.
- Under Migration compatibility click Migration Devices.
- To show more information about the pins:
- Right-click anywhere in the Pin Migration View window and select Show Columns.
- Then, click the pin feature you want to display.
- If you want to view only the pins, in at least one migration device, that have a different feature than the corresponding pin in the migration result, turn on Show migration differences.
- Click Pin Finder to open the Pin Finder dialog box to find and highlight pins with specific functionality.
If you want to view only the pins highlighted by the most recent query in the Pin Finder dialog box, turn on Show only highlighted pins.
- To export the pin migration information to a Comma-Separated Value file (.csv), click Export.
Related Information