R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide

Download PDF
ID 683501
Date 12/06/2024
Public
Document Table of Contents
Document Table of Contents x
1. About the R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express 2. IP Architecture and Functional Description 3. Advanced Features 4. Interfaces 5. Parameters 6. Troubleshooting/Debugging 7. R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide Archives 8. Document Revision History for the R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide A. Configuration Space Registers B. Root Port Enumeration C. Implementation of Address Translation Services (ATS) in Endpoint Mode D. Packets Forwarded to the User Application in TL Bypass Mode E. Margin Masks for the R-Tile Avalon Streaming Intel FPGA IP for PCI Express
1. About the R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express x
1.1. Glossary 1.2. Overview 1.3. Features 1.4. Release Information 1.5. Device Family Support 1.6. Performance and Resource Utilization 1.7. IP Core Support Levels
1.2. Overview x
1.2.1. Standards and Specifications Compliance
1.3. Features x
1.3.1. Multifunction and Virtualization Features
2. IP Architecture and Functional Description x
2.1. Overview 2.2. PCIe Hard IP Mode 2.3. PIPE Direct Mode
2.2. PCIe Hard IP Mode x
2.2.1. Clocking 2.2.2. Reset 2.2.3. PCI Express Protocol Stack
2.2.2. Reset x
2.2.2.1. Single PERST 2.2.2.2. Independent PERST Pins 2.2.2.3. Independent GPIO PERST
2.2.2.2. Independent PERST Pins x
2.2.2.2.1. REFCLK and PERST Guidelines When Using Independent PERST Pins
2.2.2.3. Independent GPIO PERST x
2.2.2.3.1. REFCLK and PERST Guidelines when Using Independent GPIO PERST
2.2.3. PCI Express Protocol Stack x
2.2.3.1. PMA 2.2.3.2. Data Link Layer Overview 2.2.3.3. Transaction Layer Overview
2.2.3.3. Transaction Layer Overview x
2.2.3.3.1. Deferrable Memory Write (DMWr)
2.3. PIPE Direct Mode x
2.3.1. Clocking 2.3.2. Reset 2.3.3. PIPE Layer
2.3.3. PIPE Layer x
2.3.3.1. Preset Mappings
3. Advanced Features x
3.1. PCIe Port Bifurcation and PHY Channel Mapping 3.2. Virtualization Support 3.3. TL Bypass Mode
3.2. Virtualization Support x
3.2.1. SR-IOV Support 3.2.2. VirtIO Support
3.2.1. SR-IOV Support x
3.2.1.1. SR-IOV Supported Features List 3.2.1.2. Implementation 3.2.1.3. VF to PF Mapping 3.2.1.4. Function Level Reset (FLR)
3.2.1.2. Implementation x
3.2.1.2.1. VF Error Flag Interface (for x16/x8 Cores Only)
3.2.2. VirtIO Support x
3.2.2.1. VirtIO Supported Features List 3.2.2.2. Overview 3.2.2.3. Parameters 3.2.2.4. VirtIO PCI Configuration Access Interface 3.2.2.5. Registers
3.2.2.5. Registers x
3.2.2.5.1. VirtIO Common Configuration Capability Register (Address: 0x012) 3.2.2.5.2. VirtIO Common Configuration BAR Indicator Register (Address: 0x013) 3.2.2.5.3. VirtIO Common Configuration BAR Offset Register (Address: 0x014) 3.2.2.5.4. VirtIO Common Configuration Structure Length Register (Address 0x015) 3.2.2.5.5. VirtIO Notifications Capability Register (Address: 0x016) 3.2.2.5.6. VirtIO Notifications BAR Indicator Register (Address: 0x017) 3.2.2.5.7. VirtIO Notifications BAR Offset Register (Address: 0x018) 3.2.2.5.8. VirtIO Notifications Structure Length Register (Address: 0x019) 3.2.2.5.9. VirtIO Notifications Notify Off Multiplier Register (Address: 0x01A) 3.2.2.5.10. VirtIO ISR Status Capability Register (Address: 0x02F) 3.2.2.5.11. VirtIO ISR Status BAR Indicator Register (Address: 0x030) 3.2.2.5.12. VirtIO ISR Status BAR Offset Register (Address: 0x031) 3.2.2.5.13. VirtIO ISR Status Structure Length Register (Address: 0x032) 3.2.2.5.14. VirtIO Device Specific Capability Register (Address: 0x033) 3.2.2.5.15. VirtIO Device Specific BAR Indicator Register (Address: 0x034) 3.2.2.5.16. VirtIO Device Specific BAR Offset Register (Address 0x035) 3.2.2.5.17. VirtIO Device Specific Structure Length Register (Address: 0x036) 3.2.2.5.18. VirtIO PCI Configuration Access Capability Register (Address: 0x037) 3.2.2.5.19. VirtIO PCI Configuration Access BAR Indicator Register (Address: 0x038) 3.2.2.5.20. VirtIO PCI Configuration Access BAR Offset Register (Address: 0x039) 3.2.2.5.21. VirtIO PCI Configuration Access Structure Length Register (Address: 0x03A) 3.2.2.5.22. VirtIO PCI Configuration Access Data Register (Address: 0x03B)
3.3. TL Bypass Mode x
3.3.1. Overview 3.3.2. Register Settings for the TL Bypass Mode 3.3.3. Hard IP Reconfiguration Interface 3.3.4. Avalon® Streaming Interface
3.3.2. Register Settings for the TL Bypass Mode x
3.3.2.1. TLPBYPASS_ERR_EN (Address 0x1314) 3.3.2.2. TLPBYPASS_ERR_STATUS (Address 0x1310)
3.3.4. Avalon® Streaming Interface x
3.3.4.1. Configuration TLP 3.3.4.2. Transmit Interface 3.3.4.3. Receive Interface 3.3.4.4. Malformed TLP 3.3.4.5. ECRC
4. Interfaces x
4.1. Clocks and Resets 4.2. Serial Data Interface 4.3. PCI Express Mode 4.4. PIPE Direct Mode
4.1. Clocks and Resets x
4.1.1. Clocks 4.1.2. Resets
4.3. PCI Express Mode x
4.3.1. Avalon® Streaming Interface 4.3.2. Precision Time Measurement (PTM) Interface (Endpoint Only) 4.3.3. Hot Plug Interface 4.3.4. Interrupt Interface 4.3.5. Hard IP Reconfiguration Interface 4.3.6. Error Interface 4.3.7. Completion Timeout Interface 4.3.8. Configuration Intercept Interface 4.3.9. Power Management Interface 4.3.10. Hard IP Status Interface 4.3.11. Page Request Services (PRS) Interface (Endpoint Only) 4.3.12. Function-Level Reset (FLR) Interface (Endpoint Only) 4.3.13. SR-IOV VF Error Flag Interface (Endpoint Only) 4.3.14. General Purpose VSEC Interface
4.3.1. Avalon® Streaming Interface x
4.3.1.1. TLP Header and Data Alignment for the Avalon® streaming RX and TX Interfaces 4.3.1.2. Credit Control 4.3.1.3. Avalon® Streaming RX Interface 4.3.1.4. Avalon® Streaming TX Interface 4.3.1.5. Tag Allocation
4.3.1.2. Credit Control x
4.3.1.2.1. Credit Interface - Data and Header 4.3.1.2.2. Credit Initialization 4.3.1.2.3. Credit Update/Release 4.3.1.2.4. RX Flow Control Interface 4.3.1.2.5. TX Flow Control Interface
4.3.1.3. Avalon® Streaming RX Interface x
4.3.1.3.1. Application Logic Guidelines for the Avalon Streaming RX Interface
4.3.1.4. Avalon® Streaming TX Interface x
4.3.1.4.1. Application Logic Guidelines for the Avalon Streaming TX Interface 4.3.1.4.2. Avalon® Streaming TX Interface pX_tx_st_ready_o Behavior
4.3.1.5. Tag Allocation x
4.3.1.5.1. Completion Buffer Size
4.3.4. Interrupt Interface x
4.3.4.1. Legacy Interrupts 4.3.4.2. MSI 4.3.4.3. MSI-X
4.3.4.3. MSI-X x
4.3.4.3.1. Implementing MSI-X Interrupts
4.3.9. Power Management Interface x
4.3.9.1. D3Hot Entry 4.3.9.2. D3Hot Exit 4.3.9.3. D3Cold Entry 4.3.9.4. D3Cold Exit
4.3.9.2. D3Hot Exit x
4.3.9.2.1. D3Hot Exit Initiated by Host 4.3.9.2.2. D3Hot Exit Initiated by EP
4.4. PIPE Direct Mode x
4.4.1. Data Signals 4.4.2. Command and Status Signals 4.4.3. Message Bus Signals 4.4.4. Deskew Signals 4.4.5. PIPE Direct Reset Sequence 4.4.6. PIPE Direct Speed Change 4.4.7. PIPE Lane Reset Staggering 4.4.8. Unused Lanes in PIPE Direct Mode
4.4.1. Data Signals x
4.4.1.1. Transmit Signals 4.4.1.2. Receive Signals
4.4.4. Deskew Signals x
4.4.4.1. MAC to PHY (M2P) Signals 4.4.4.2. PHY to MAC (P2M) Signals
5. Parameters x
5.1. Top-Level Settings 5.2. Core Parameters 5.3. Design Examples
5.2. Core Parameters x
5.2.1. Avalon Parameters 5.2.2. Base Address Registers 5.2.3. PCI Express and PCI Capabilities Parameters
5.2.3. PCI Express and PCI Capabilities Parameters x
5.2.3.1. Device Capabilities 5.2.3.2. VirtIO Parameters 5.2.3.3. Link Capabilities 5.2.3.4. Legacy Interrupt Pin Register 5.2.3.5. MSI Capabilities 5.2.3.6. MSI-X Capabilities 5.2.3.7. Slot Capabilities 5.2.3.8. Latency Tolerance Reporting (LTR) 5.2.3.9. Process Address Space ID (PASID) 5.2.3.10. Device Serial Number Capability 5.2.3.11. Page Request Service (PRS) 5.2.3.12. Access Control Service (ACS) 5.2.3.13. Power Management 5.2.3.14. Vendor Specific Extended Capability (VSEC) Registers 5.2.3.15. TLP Processing Hints (TPH) 5.2.3.16. Address Translation Services (ATS) Capabilities 5.2.3.17. Precision Time Measurement (PTM)
5.3. Design Examples x
5.3.1. Design Example Files 5.3.2. Generated HDL Format 5.3.3. Target Development Kit 5.3.4. Currently Selected Design Example
6. Troubleshooting/Debugging x
6.1. Hardware Debug 6.2. Operating System Tools and Utilities 6.3. Signal Tap Logic Analyzer 6.4. Using the Hard IP Reconfiguration Interface for Debugging 6.5. Other Interfaces That Can Be Used for Debug Activities 6.6. Debug Toolkit
6.1. Hardware Debug x
6.1.1. Debugging Link Training Issues 6.1.2. Debugging Device Enumeration Issues 6.1.3. Debugging Data Transfer and Performance Issues
6.1.3. Debugging Data Transfer and Performance Issues x
6.1.3.1. Advanced Error Reporting (AER)
6.2. Operating System Tools and Utilities x
6.2.1. Using lspci Utility to Read Negotiated Link Speed
6.4. Using the Hard IP Reconfiguration Interface for Debugging x
6.4.1. Using the Hard IP Reconfiguration Interface to Enable and Read ECRC and LCRC Error Counts
6.6. Debug Toolkit x
6.6.1. Overview 6.6.2. Enabling the R-Tile Debug Toolkit 6.6.3. Launching the R-Tile Debug Toolkit 6.6.4. Using the R-Tile Debug Toolkit
6.6.4. Using the R-Tile Debug Toolkit x
6.6.4.1. R-Tile Information 6.6.4.2. Event Counters 6.6.4.3. Link Inspector 6.6.4.4. Configuration Space 6.6.4.5. Channel Parameters
6.6.4.5. Channel Parameters x
6.6.4.5.1. General PHY 6.6.4.5.2. Tx Path 6.6.4.5.3. Rx Path 6.6.4.5.4. Lane Margining
C. Implementation of Address Translation Services (ATS) in Endpoint Mode x
C.1. Sending Translated/Untranslated Requests C.2. Sending a Page Request Message from the Endpoint (EP) to the Root Complex (RC) C.3. Invalidating Requests/Completions
D. Packets Forwarded to the User Application in TL Bypass Mode x
D.1. Upstream TL Bypass Mode D.2. Downstream TL Bypass Mode
E. Margin Masks for the R-Tile Avalon Streaming Intel FPGA IP for PCI Express x
E.1. Margin Masks Overview E.2. 5x5 Testing Efficiency E.3. Debug Toolkit Margin Methodology
E.2. 5x5 Testing Efficiency x
E.2.1. First Time Testing E.2.2. Spot Check Testing
E.3. Debug Toolkit Margin Methodology x
E.3.1. Debug Toolkit Testing Process
1. About the R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express
2. IP Architecture and Functional Description
3. Advanced Features
4. Interfaces
5. Parameters
6. Troubleshooting/Debugging
7. R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide Archives
8. Document Revision History for the R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide
A. Configuration Space Registers
B. Root Port Enumeration
C. Implementation of Address Translation Services (ATS) in Endpoint Mode
D. Packets Forwarded to the User Application in TL Bypass Mode
E. Margin Masks for the R-Tile Avalon Streaming Intel FPGA IP for PCI Express

4.1.2. Resets

Table 47.  Resets
Name Direction Description EP/RP/BP/PIPE-D Asynchronous / Synchronous
pin_perst_n Input

This is the reset signal from the board. This pin is not available to the FPGA user logic. If you want to use the PERST# signal in user logic or in the Intel Signal Tap tool, you need to use the pin_perst_n_o signal.

EP/RP/BP/PIPE-D Asynchronous
pin_perst0_n, pin_perst1_n Input These are the reset signals from the board. These inputs ports are only available when using the Configuration Mode 1(2x8) and the parameter Enable Independent Perst Pins is set to Enable.
Note: You must have a weak pull-down on the pin_perst0_n/pin_perst1_n pins if the corresponding port is not supplied with a reference clock (refclk0/1) during the FPGA configuration. Failing to meet this requirement may cause both ports to fail to link up when pin_perst_n is toggled once configuration is complete and the reference clock (refclk0/1) is not available. Toggling pin_perst_n or the corresponding pin_perst0_n/pin_perst1_n after the FPGA configuration completion will not recover the links and the FPGA will need to be reconfigured.
EP Asynchronous
pin_perst_n_o Output This output signal to the FPGA fabric indicates if PERST# is asserted. EP/RP/BP/PIPE-D Asynchronous
ninit_done Input

A "1" on this active-low signal indicates that the FPGA device is not yet fully configured. A "0" indicates the device has been configured and is in normal operating mode.

You need to instantiate the Reset Release IP and connect the output of that IP to ninit_done.

EP/RP/BP/PIPE-D Asynchronous
pX_reset_status_n_o Output

This active-low signal is held low until pin_perst_n has been deasserted and the PCIe Hard IP has come out of reset. This signal is synchronous to coreclkout_hip.

When port bifurcation is used, there is one such signal for each Avalon® Streaming interface. Signals for different interfaces are differentiated by the prefixes p<n>.

Traffic between the user logic in the FPGA core and the IP can start when pX_reset_status_n_o is asserted high.

EP/RP/BP Synchronous to coreclkout_hip.
pX_slow_reset_status_n_o Output This is the equivalent signal for pX_reset_status_n_o in the slow_clk domain. EP/RP/BP Synchronous to slow_clk.
pX_cold_perst_n_i Input

When enabled, these active-low signals independently trigger cold resets to individual PCIe Controllers.

If these inputs are not used, they should be tied off to 1.

 EP/RP/BP Synchronous to coreclkout_hip.
pX_warm_perst_n_i Input

When enabled, these active-low signals independently trigger warm resets to individual PCIe Controllers.

If these inputs are not used, they should be tied off to 1.

 EP/RP/BP Synchronous to coreclkout_hip.
pX_ip_rst_n_o Output These active-low output signals are exposed to the Application logic and indicate the status of the Hard Reset Controller triggering resets to individual PCIe Controllers. EP/RP/BP Synchronous to coreclkout_hip.
LnX_pipe_direct_reset_status_n (X = 0 - 15) Output This active-low per-lane signal is held low until the PHY RX path is out of reset, and when deasserted is an indication to the application logic that the RX data transfer is beginning. PIPE-D Synchronous to pipe_direct_pld_tx_clk_out_o.
LnX_pipe_direct_pld_pcs_rst_n_i (X = 0 - 15) Input This is the per-lane PHY channel reset signal. The Soft IP Controller must release this signal after the per-lane LnX_pipe_direct_tx_transfer_en_o signal is asserted. Follow the reset sequence as shown in PIPE Direct Reset Sequence. PIPE-D Asynchronous

Level Two Title