R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide

Download PDF
ID 683501
Date 12/06/2024
Public
Document Table of Contents
Document Table of Contents x
1. About the R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express 2. IP Architecture and Functional Description 3. Advanced Features 4. Interfaces 5. Parameters 6. Troubleshooting/Debugging 7. R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide Archives 8. Document Revision History for the R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide A. Configuration Space Registers B. Root Port Enumeration C. Implementation of Address Translation Services (ATS) in Endpoint Mode D. Packets Forwarded to the User Application in TL Bypass Mode E. Margin Masks for the R-Tile Avalon Streaming Intel FPGA IP for PCI Express
1. About the R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express x
1.1. Glossary 1.2. Overview 1.3. Features 1.4. Release Information 1.5. Device Family Support 1.6. Performance and Resource Utilization 1.7. IP Core Support Levels
1.2. Overview x
1.2.1. Standards and Specifications Compliance
1.3. Features x
1.3.1. Multifunction and Virtualization Features
2. IP Architecture and Functional Description x
2.1. Overview 2.2. PCIe Hard IP Mode 2.3. PIPE Direct Mode
2.2. PCIe Hard IP Mode x
2.2.1. Clocking 2.2.2. Reset 2.2.3. PCI Express Protocol Stack
2.2.2. Reset x
2.2.2.1. Single PERST 2.2.2.2. Independent PERST Pins 2.2.2.3. Independent GPIO PERST
2.2.2.2. Independent PERST Pins x
2.2.2.2.1. REFCLK and PERST Guidelines When Using Independent PERST Pins
2.2.2.3. Independent GPIO PERST x
2.2.2.3.1. REFCLK and PERST Guidelines when Using Independent GPIO PERST
2.2.3. PCI Express Protocol Stack x
2.2.3.1. PMA 2.2.3.2. Data Link Layer Overview 2.2.3.3. Transaction Layer Overview
2.2.3.3. Transaction Layer Overview x
2.2.3.3.1. Deferrable Memory Write (DMWr)
2.3. PIPE Direct Mode x
2.3.1. Clocking 2.3.2. Reset 2.3.3. PIPE Layer
2.3.3. PIPE Layer x
2.3.3.1. Preset Mappings
3. Advanced Features x
3.1. PCIe Port Bifurcation and PHY Channel Mapping 3.2. Virtualization Support 3.3. TL Bypass Mode
3.2. Virtualization Support x
3.2.1. SR-IOV Support 3.2.2. VirtIO Support
3.2.1. SR-IOV Support x
3.2.1.1. SR-IOV Supported Features List 3.2.1.2. Implementation 3.2.1.3. VF to PF Mapping 3.2.1.4. Function Level Reset (FLR)
3.2.1.2. Implementation x
3.2.1.2.1. VF Error Flag Interface (for x16/x8 Cores Only)
3.2.2. VirtIO Support x
3.2.2.1. VirtIO Supported Features List 3.2.2.2. Overview 3.2.2.3. Parameters 3.2.2.4. VirtIO PCI Configuration Access Interface 3.2.2.5. Registers
3.2.2.5. Registers x
3.2.2.5.1. VirtIO Common Configuration Capability Register (Address: 0x012) 3.2.2.5.2. VirtIO Common Configuration BAR Indicator Register (Address: 0x013) 3.2.2.5.3. VirtIO Common Configuration BAR Offset Register (Address: 0x014) 3.2.2.5.4. VirtIO Common Configuration Structure Length Register (Address 0x015) 3.2.2.5.5. VirtIO Notifications Capability Register (Address: 0x016) 3.2.2.5.6. VirtIO Notifications BAR Indicator Register (Address: 0x017) 3.2.2.5.7. VirtIO Notifications BAR Offset Register (Address: 0x018) 3.2.2.5.8. VirtIO Notifications Structure Length Register (Address: 0x019) 3.2.2.5.9. VirtIO Notifications Notify Off Multiplier Register (Address: 0x01A) 3.2.2.5.10. VirtIO ISR Status Capability Register (Address: 0x02F) 3.2.2.5.11. VirtIO ISR Status BAR Indicator Register (Address: 0x030) 3.2.2.5.12. VirtIO ISR Status BAR Offset Register (Address: 0x031) 3.2.2.5.13. VirtIO ISR Status Structure Length Register (Address: 0x032) 3.2.2.5.14. VirtIO Device Specific Capability Register (Address: 0x033) 3.2.2.5.15. VirtIO Device Specific BAR Indicator Register (Address: 0x034) 3.2.2.5.16. VirtIO Device Specific BAR Offset Register (Address 0x035) 3.2.2.5.17. VirtIO Device Specific Structure Length Register (Address: 0x036) 3.2.2.5.18. VirtIO PCI Configuration Access Capability Register (Address: 0x037) 3.2.2.5.19. VirtIO PCI Configuration Access BAR Indicator Register (Address: 0x038) 3.2.2.5.20. VirtIO PCI Configuration Access BAR Offset Register (Address: 0x039) 3.2.2.5.21. VirtIO PCI Configuration Access Structure Length Register (Address: 0x03A) 3.2.2.5.22. VirtIO PCI Configuration Access Data Register (Address: 0x03B)
3.3. TL Bypass Mode x
3.3.1. Overview 3.3.2. Register Settings for the TL Bypass Mode 3.3.3. Hard IP Reconfiguration Interface 3.3.4. Avalon® Streaming Interface
3.3.2. Register Settings for the TL Bypass Mode x
3.3.2.1. TLPBYPASS_ERR_EN (Address 0x1314) 3.3.2.2. TLPBYPASS_ERR_STATUS (Address 0x1310)
3.3.4. Avalon® Streaming Interface x
3.3.4.1. Configuration TLP 3.3.4.2. Transmit Interface 3.3.4.3. Receive Interface 3.3.4.4. Malformed TLP 3.3.4.5. ECRC
4. Interfaces x
4.1. Clocks and Resets 4.2. Serial Data Interface 4.3. PCI Express Mode 4.4. PIPE Direct Mode
4.1. Clocks and Resets x
4.1.1. Clocks 4.1.2. Resets
4.3. PCI Express Mode x
4.3.1. Avalon® Streaming Interface 4.3.2. Precision Time Measurement (PTM) Interface (Endpoint Only) 4.3.3. Hot Plug Interface 4.3.4. Interrupt Interface 4.3.5. Hard IP Reconfiguration Interface 4.3.6. Error Interface 4.3.7. Completion Timeout Interface 4.3.8. Configuration Intercept Interface 4.3.9. Power Management Interface 4.3.10. Hard IP Status Interface 4.3.11. Page Request Services (PRS) Interface (Endpoint Only) 4.3.12. Function-Level Reset (FLR) Interface (Endpoint Only) 4.3.13. SR-IOV VF Error Flag Interface (Endpoint Only) 4.3.14. General Purpose VSEC Interface
4.3.1. Avalon® Streaming Interface x
4.3.1.1. TLP Header and Data Alignment for the Avalon® streaming RX and TX Interfaces 4.3.1.2. Credit Control 4.3.1.3. Avalon® Streaming RX Interface 4.3.1.4. Avalon® Streaming TX Interface 4.3.1.5. Tag Allocation
4.3.1.2. Credit Control x
4.3.1.2.1. Credit Interface - Data and Header 4.3.1.2.2. Credit Initialization 4.3.1.2.3. Credit Update/Release 4.3.1.2.4. RX Flow Control Interface 4.3.1.2.5. TX Flow Control Interface
4.3.1.3. Avalon® Streaming RX Interface x
4.3.1.3.1. Application Logic Guidelines for the Avalon Streaming RX Interface
4.3.1.4. Avalon® Streaming TX Interface x
4.3.1.4.1. Application Logic Guidelines for the Avalon Streaming TX Interface 4.3.1.4.2. Avalon® Streaming TX Interface pX_tx_st_ready_o Behavior
4.3.1.5. Tag Allocation x
4.3.1.5.1. Completion Buffer Size
4.3.4. Interrupt Interface x
4.3.4.1. Legacy Interrupts 4.3.4.2. MSI 4.3.4.3. MSI-X
4.3.4.3. MSI-X x
4.3.4.3.1. Implementing MSI-X Interrupts
4.3.9. Power Management Interface x
4.3.9.1. D3Hot Entry 4.3.9.2. D3Hot Exit 4.3.9.3. D3Cold Entry 4.3.9.4. D3Cold Exit
4.3.9.2. D3Hot Exit x
4.3.9.2.1. D3Hot Exit Initiated by Host 4.3.9.2.2. D3Hot Exit Initiated by EP
4.4. PIPE Direct Mode x
4.4.1. Data Signals 4.4.2. Command and Status Signals 4.4.3. Message Bus Signals 4.4.4. Deskew Signals 4.4.5. PIPE Direct Reset Sequence 4.4.6. PIPE Direct Speed Change 4.4.7. PIPE Lane Reset Staggering 4.4.8. Unused Lanes in PIPE Direct Mode
4.4.1. Data Signals x
4.4.1.1. Transmit Signals 4.4.1.2. Receive Signals
4.4.4. Deskew Signals x
4.4.4.1. MAC to PHY (M2P) Signals 4.4.4.2. PHY to MAC (P2M) Signals
5. Parameters x
5.1. Top-Level Settings 5.2. Core Parameters 5.3. Design Examples
5.2. Core Parameters x
5.2.1. Avalon Parameters 5.2.2. Base Address Registers 5.2.3. PCI Express and PCI Capabilities Parameters
5.2.3. PCI Express and PCI Capabilities Parameters x
5.2.3.1. Device Capabilities 5.2.3.2. VirtIO Parameters 5.2.3.3. Link Capabilities 5.2.3.4. Legacy Interrupt Pin Register 5.2.3.5. MSI Capabilities 5.2.3.6. MSI-X Capabilities 5.2.3.7. Slot Capabilities 5.2.3.8. Latency Tolerance Reporting (LTR) 5.2.3.9. Process Address Space ID (PASID) 5.2.3.10. Device Serial Number Capability 5.2.3.11. Page Request Service (PRS) 5.2.3.12. Access Control Service (ACS) 5.2.3.13. Power Management 5.2.3.14. Vendor Specific Extended Capability (VSEC) Registers 5.2.3.15. TLP Processing Hints (TPH) 5.2.3.16. Address Translation Services (ATS) Capabilities 5.2.3.17. Precision Time Measurement (PTM)
5.3. Design Examples x
5.3.1. Design Example Files 5.3.2. Generated HDL Format 5.3.3. Target Development Kit 5.3.4. Currently Selected Design Example
6. Troubleshooting/Debugging x
6.1. Hardware Debug 6.2. Operating System Tools and Utilities 6.3. Signal Tap Logic Analyzer 6.4. Using the Hard IP Reconfiguration Interface for Debugging 6.5. Other Interfaces That Can Be Used for Debug Activities 6.6. Debug Toolkit
6.1. Hardware Debug x
6.1.1. Debugging Link Training Issues 6.1.2. Debugging Device Enumeration Issues 6.1.3. Debugging Data Transfer and Performance Issues
6.1.3. Debugging Data Transfer and Performance Issues x
6.1.3.1. Advanced Error Reporting (AER)
6.2. Operating System Tools and Utilities x
6.2.1. Using lspci Utility to Read Negotiated Link Speed
6.4. Using the Hard IP Reconfiguration Interface for Debugging x
6.4.1. Using the Hard IP Reconfiguration Interface to Enable and Read ECRC and LCRC Error Counts
6.6. Debug Toolkit x
6.6.1. Overview 6.6.2. Enabling the R-Tile Debug Toolkit 6.6.3. Launching the R-Tile Debug Toolkit 6.6.4. Using the R-Tile Debug Toolkit
6.6.4. Using the R-Tile Debug Toolkit x
6.6.4.1. R-Tile Information 6.6.4.2. Event Counters 6.6.4.3. Link Inspector 6.6.4.4. Configuration Space 6.6.4.5. Channel Parameters
6.6.4.5. Channel Parameters x
6.6.4.5.1. General PHY 6.6.4.5.2. Tx Path 6.6.4.5.3. Rx Path 6.6.4.5.4. Lane Margining
C. Implementation of Address Translation Services (ATS) in Endpoint Mode x
C.1. Sending Translated/Untranslated Requests C.2. Sending a Page Request Message from the Endpoint (EP) to the Root Complex (RC) C.3. Invalidating Requests/Completions
D. Packets Forwarded to the User Application in TL Bypass Mode x
D.1. Upstream TL Bypass Mode D.2. Downstream TL Bypass Mode
E. Margin Masks for the R-Tile Avalon Streaming Intel FPGA IP for PCI Express x
E.1. Margin Masks Overview E.2. 5x5 Testing Efficiency E.3. Debug Toolkit Margin Methodology
E.2. 5x5 Testing Efficiency x
E.2.1. First Time Testing E.2.2. Spot Check Testing
E.3. Debug Toolkit Margin Methodology x
E.3.1. Debug Toolkit Testing Process
1. About the R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express
2. IP Architecture and Functional Description
3. Advanced Features
4. Interfaces
5. Parameters
6. Troubleshooting/Debugging
7. R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide Archives
8. Document Revision History for the R-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide
A. Configuration Space Registers
B. Root Port Enumeration
C. Implementation of Address Translation Services (ATS) in Endpoint Mode
D. Packets Forwarded to the User Application in TL Bypass Mode
E. Margin Masks for the R-Tile Avalon Streaming Intel FPGA IP for PCI Express

3.2.2.4. VirtIO PCI Configuration Access Interface

To access a VirtIO device region, pci_cfg_data will provide a window of size cap.length (1, 2 or 4 Bytes) into the given cap.bar (0x0 – 0x5) at offset cap.offset (multiple of cap.length). Detailed interfaces mapping for the user application logic are shown in the following table.

As for the VirtIO device, upon detecting a driver write access to pci_cfg_data, the user application side's VirtIO device must execute a write access at cap.offset at the BAR selected by cap.bar using the first cap.length bytes from pci_cfg_data. Moreover, upon detecting a driver read access to pci_cfg_data, the user application side's VirtIO device must execute a read access of length cap.length at cap.offset at the BAR selected by cap.bar and store the first cap.length bytes in pci_cfg_data.

Table 17.  VirtIO PCI Configuration Access Interface
Name Direction Description Clock Domain
pX_virtio_pcicfg_vfaccess_o where X = 0, 1 O

Indicates the driver access is to a VF.

The corresponding Virtual Function is identified from the value of virtio_pcicfg_vfnum_o.

slow_clk
pX_virtio_pcicfg_vfnum_o[VFNUM_WIDTH-1:0] where X = 0, 1 O

Indicates the corresponding Virtual Function number associated with the current Physical Function that the driver’s write or read access is targeting.

Validated by virtio_pcicfg_vfaccess_o and by driver write access to pci_cfg_data, or driver read access to pci_cfg_data.

slow_clk
pX_virtio_pcicfg_pfnum_o[PFNUM_WIDTH-1:0] where X = 0, 1 O

Indicates the corresponding Physical Function number that the driver’s write or read access is targeting.

Validated by driver write access to pci_cfg_data, or driver read access to pci_cfg_data.

slow_clk
pX_virtio_pcicfg_bar_o[7:0] where X = 0, 1 O

Indicates the BAR holding the PCI configuration access structure. The driver sets the BAR to access by writing to cap.bar. Values 0x0 to 0x5 specify a BAR belonging to the function located beginning at 10h in the PCI Configuration Space. The BAR can be either 32-bit or 64-bit.

Validated by driver write access to pci_cfg_data, or driver read access to pci_cfg_data.

The corresponding PF or VF is identified from the value of virtio_pcicfg_p/vfnum_o.

slow_clk
pX_virtio_pcicfg_length_o[31:0] where X = 0, 1 O

Indicates the length of the structure. The length may include padding, or fields unused by the driver, or future extensions. The driver sets the size of the access by writing 1, 2 or 4 to cap.length.

Validated by driver write access to pci_cfg_data, or driver read access to pci_cfg_data.

The corresponding PF or VF is identified from the value of virtio_pcicfg_p/vfnum_o.

slow_clk
pX_virtio_pcicfg_baroffset_o[31:0] where X = 0, 1 O

Indicates where the structure begins relative to the base address associated with the BAR. The driver sets the offset within the BAR by writing to cap.offset.

Validated by driver write access to pci_cfg_data, or driver read access to pci_cfg_data.

The corresponding PF or VF is identified from the value of virtio_pcicfg_p/vfnum_o.

slow_clk
pX_virtio_pcicfg_cfgdata_o[31:0] where X = 0, 1 O

Indicates the data for BAR access. The pci_cfg_data will provide a window of size cap.length into the given cap.bar at offset cap.offset.

Validated by driver write access to pci_cfg_data, or driver read access to pci_cfg_data.

The corresponding PF or VF is identified from the value of virtio_pcicfg_p/vfnum_o.

slow_clk
pX_virtio_pcicfg_cfgwr_o where X = 0, 1 O

Indicates driver write access to pci_cfg_data.

The corresponding PF or VF is identified from the value of virtio_pcicfg_p/vfnum_o.

slow_clk
pX_virtio_pcicfg_cfgrd_o where X = 0, 1 O

Indicates driver read access to pci_cfg_data.

The corresponding PF or VF is identified from the value of virtio_pcicfg_p/vfnum_o.

slow_clk
pX_virtio_pcicfg_appvfnum_i[VFNUM_WIDTH-1:0] where X = 0, 1 I

Indicates the corresponding Virtual Function number associated with the current Physical Function that the application config data storage is for.

Validated by virtio_pcicfg_rdack_i.

slow_clk
pX_virtio_pcicfg_apppfnum_i[PFNUM_WIDTH-1:0] where X = 0, 1 I

Indicates the corresponding Physical Function number that the application config data storage is for.

Validated by virtio_pcicfg_rdack_i.

slow_clk
pX_virtio_pcicfg_rdack_i where X = 0, 1 I

Indicates an application read access data ack to store the config data in pci_cfg_data. Usually the reasonable ack latency is no more than 10 cycles.

The corresponding Virtual Function is identified from the value of virtio_pcicfg_appvfnum_i.

slow_clk
pX_virtio_pcicfg_rdbe_i[3:0] where X = 0, 1 I

Indicates application enabled bytes within virtio_pcicfg_data_i.

Validated by virtio_pcicfg_rdack_i.

The corresponding Virtual Function is identified from the value of virtio_pcicfg_appvfnum_i.

For the current implementation of the Hard IP, these signals are tied high.

slow_clk
pX_virtio_pcicfg_data_i[31:0] where X = 0, 1 I

Indicates application data to be stored in PCI Configuration Access data registers.

Validated by virtio_pcicfg_rdack_i and virtio_pcicfg_rdbe_i.

The corresponding Virtual Function is identified from the value of virtio_pcicfg_appvfnum_i.

slow_clk
Level Two Title