Video and Image Processing Suite User Guide

ID 683416
Date 2/12/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

26.3. Avalon-ST Video Monitor Parameter Settings

Table 86.  Avalon-ST Video Monitor Parameter Settings
Parameter Value Description
Bits per pixel per color plane 4–20, Default = 8 Select the number of bits per pixel (per color plane).
Number of color planes 1–3, Default = 3 Specify the number of color planes transmitted.
Color planes transmitted in parallel On or Off
  • Turn on to transmit all the color planes at the same time in parallel.
  • Turn off to transmit all the color planes in series.
Pixels in parallel 1, 2, or 4 Specify the number of pixels in parallel that the video pipeline is configured for.
Note: You must specify this parameter value to 1 to capture video data frames.
Bit width of capture interface(s)
  • 8
  • 16
  • 32
  • 64
  • 128
Select the data bus width of the Avalon-ST interface sending the captured information.
Capture video pixel data On or Off Turn on to enable the inclusion of hardware that allows the monitor to capture video data frames.
Note: This parameter only functions if you specify the number of pixels in parallel to a value of 1.