F-Tile CPRI PHY Intel® FPGA IP Design Example User Guide

Download PDF
ID 683281
Date 9/30/2024
Public
Document Table of Contents
Document Table of Contents x
1. Quick Start Guide 2. Design Example Description 3. F-Tile CPRI PHY Intel® FPGA IP Design Example User Guide Archives 4. Document Revision History for the F-Tile CPRI PHY Intel® FPGA IP Design Example User Guide
1. Quick Start Guide x
1.1. Hardware and Software Requirements 1.2. Generating the Design Example 1.3. Directory Structure 1.4. Simulating the Design Example 1.5. Compiling the Compilation-Only Project 1.6. Compiling and Configuring the Design Example in Hardware 1.7. Testing the Hardware Design Example 1.8. Transceiver Toolkit
1.2. Generating the Design Example x
1.2.1. Design Example Parameters 1.2.2. Analog Parameters for F-Tile IPs
1.4. Simulating the Design Example x
1.4.1. Simulating the Design Example Testbench 1.4.2. Simulating the Design Example Testbench Simplified Model
2. Design Example Description x
2.1. Features 2.2. Design Example Components 2.3. Simulation Design Example 2.4. F-Tile CPRI IP Hardware Design Example 2.5. Interface Signals 2.6. Design Example Registers
2.2. Design Example Components x
2.2.1. Packet Client 2.2.2. Round Trip Counter 2.2.3. Sources and Probes 2.2.4. Avalon® Memory-Mapped Decoder 2.2.5. JTAG Host 2.2.6. IOPLL 2.2.7. System PLL
1. Quick Start Guide
2. Design Example Description
3. F-Tile CPRI PHY Intel® FPGA IP Design Example User Guide Archives
4. Document Revision History for the F-Tile CPRI PHY Intel® FPGA IP Design Example User Guide

1.7. Testing the Hardware Design Example

After you compile the F-Tile CPRI PHY Intel® FPGA IP core design example and configure it on your Agilex™ 7 device, you can use the System Console to program the IP core and its PHY IP core registers.

To start the System Console and test the hardware design example, follow these steps:

  1. After the hardware design example is configured on the Agilex™ 7 device, in the Quartus® Prime Pro Edition software, click Tools > System Debugging Tools > System Console.
  2. In the Tcl Console pane, type cd hwtest to change directory to <design_example_dir>/hardware_test_design/hwtest_sl.
  3. Type source main_script.tcl to open a connection to the JTAG master and start the test.
Level Two Title