F-Tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide

ID 683140
Date 11/13/2024
Public
Document Table of Contents

4.1.1.1.1. Functional Level Reset (FLR)

Use the FLR interface to reset individual SR-IOV functions. The PCIe Hard IP supports FLR for both PFs and VFs. If the FLR is for a specific VF, the received packets for that VF are no longer valid.

The flr_* interface signals are provided to the application interface for this purpose. When the flr_rcvd* signal is asserted, it indicates that a FLR is received for a particular PF/VF. Application logic needs to perform its FLR routine and send the completion status back on the flr_completed* interface.

The Hard IP waits for the flr_completed* status to re-enable the VF. Prior to that event, the Hard IP will respond to transactions to the function that is reset by the FLR as follows:
  • It will discard all posted requests and return Unsupported Request (UR) for non-posted requests.
  • It will discard completions as Unexpected Completions (UC).
The following figure shows the timing diagram for an FLR event targeting a PF (PF1 in this example).
Figure 49. FLR for PF
The following figure shows the timing diagram for an FLR event targeting a VF.
Figure 50. FLR for VF