Visible to Intel only — GUID: lro1432914525996
Ixiasoft
2.1. Starting the Flash Programmer GUI
2.2. Specifying your Flash Programmer Settings
2.3. Working with Flash Programmer Settings Files
2.4. Setting the Hardware Connection
2.5. Checking System ID and System Timestamp
2.6. Generating Flash Files and Programming Flash Memory
2.7. Document Revision History for Using the Flash Programmer GUI
B.1. Overview
B.2. Start Button Grayed Out in the Flash Programmer GUI
B.3. 'No Nios® II Processors Available' Error
B.4. 'No CFI Table Found' Error
B.5. 'No EPCS Registers Found' Error
B.6. 'System Does Not Have Any Flash Memory' Error
B.7. 'Reading System ID at Address 0x<address>: FAIL' Error
B.8. 'Base Address Not Aligned on Size of Device' Error
B.9. Document Revision History for Troubleshooting
Visible to Intel only — GUID: lro1432914525996
Ixiasoft
3.4. bin2flash
The bin2flash utility converts an arbitrary file to an S-record file suitable for use by the flash programmer. You can use bin2flash to convert read-only binary data needed by a Nios® II program, such as software configuration tables.
Depending on your application, you might find it more convenient to use the Intel FPGA Read-Only Zip Filing System, which serves the same purpose.
Note: Do not use bin2flash to convert executable software files or FPGA configuration files. To convert Nios® II software executable files, use elf2flash. To convert FPGA configuration files, use sof2flash.