DisplayPort Intel® Arria 10 FPGA IP Design Example User Guide

Download PDF
ID 683050
Date 11/12/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide 2. Parallel Loopback Design Examples 3. HDCP Over DisplayPort Design Example for Intel® Arria® 10 Devices 4. DisplayPort Intel® Arria® 10 FPGA IP Design Example User Guide Archives 5. Revision History for DisplayPort Intel® Arria® 10 FPGA IP Design Example User Guide
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide x
1.1. Directory Structure 1.2. Hardware and Software Requirements 1.3. Generating the Design 1.4. Simulating the Design 1.5. Compiling and Testing the Design 1.6. DisplayPort Intel® FPGA IP Design Example Parameters
1.5. Compiling and Testing the Design x
1.5.1. Regenerating ELF File
2. Parallel Loopback Design Examples x
2.1. Intel® Arria® 10 DisplayPort SST Parallel Loopback Design Features 2.2. Intel® Arria® 10 DisplayPort MST Parallel Loopback Design Features 2.3. Enabling Adaptive Sync Support 2.4. Creating RX-Only or TX-Only Designs 2.5. Design Components 2.6. Clocking Scheme 2.7. Interface Signals and Parameters 2.8. Hardware Setup 2.9. Simulation Testbench 2.10. DisplayPort Transceiver Reconfiguration Flow 2.11. Transceiver Lane Configurations
3. HDCP Over DisplayPort Design Example for Intel® Arria® 10 Devices x
3.1. High-bandwidth Digital Content Protection (HDCP) 3.2. HDCP Over DisplayPort Design Example Architecture 3.3. Nios II Processor Software Flow 3.4. Design Walkthrough 3.5. Protection of Encryption Key Embedded in FPGA Design 3.6. Debug Guidelines
3.4. Design Walkthrough x
3.4.1. Set Up the Hardware 3.4.2. Generate the Design 3.4.3. Include HDCP Production Keys 3.4.4. Compile the Design 3.4.5. View the Results
3.4.3. Include HDCP Production Keys x
3.4.3.1. Store plain HDCP production keys in the FPGA (Support HDCP Key Management = 0) 3.4.3.2. Store encrypted HDCP production keys in the external flash memory or EEPROM (Support HDCP Key Management = 1)
3.4.3.1. Store plain HDCP production keys in the FPGA (Support HDCP Key Management = 0) x
3.4.3.1.1. HDCP Key Mapping from DCP Key Files 3.4.3.1.2. hdcp1x_tx_kmem.v and hdcp1x_rx_kmem.v files 3.4.3.1.3. hdcp2x_rx_kmem.v file 3.4.3.1.4. hdcp2x_tx_kmem.v file
3.4.3.2. Store encrypted HDCP production keys in the external flash memory or EEPROM (Support HDCP Key Management = 1) x
3.4.3.2.1. Intel KEYENC 3.4.3.2.2. Key Programmer
3.4.5. View the Results x
3.4.5.1. LED Functions
3.5. Protection of Encryption Key Embedded in FPGA Design x
3.5.1. Security Considerations
3.6. Debug Guidelines x
3.6.1. HDCP Status Signals 3.6.2. Modifying HDCP Software Parameters 3.6.3. Frequently Asked Questions (FAQ)
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide
2. Parallel Loopback Design Examples
3. HDCP Over DisplayPort Design Example for Intel® Arria® 10 Devices
4. DisplayPort Intel® Arria® 10 FPGA IP Design Example User Guide Archives
5. Revision History for DisplayPort Intel® Arria® 10 FPGA IP Design Example User Guide

2.11. Transceiver Lane Configurations

If you want to configure your design to use 1, 2 or 4 lanes targeting different versions of Bitec FMC daughter cards, you have to configure the pin assignments accordingly in the Intel® Quartus® Prime Pro Settings File (QSF).
To configure the DisplayPort Intel® FPGA IP design example using 1, 2 or 4 lanes, follow these steps:
  1. In both the DisplayPort Source and Sink parameter editors, set the Maximum lane count parameter to 1, 2 or 4.
  2. Generate the design example.
  3. Make the following assignments in the Assignment Editor.
    Table 26.  Pin Assignments for Bitec FMC Revision 8 or Earlier
    DisplayPort Pin Location

    ( Intel® Arria® 10 Development Kit)

    		Four Lanes Two Lanes One Lane
    Source BC7 fmca_dp_c2m_p[0] Not applicable Not applicable
    BC8 fmca_dp_c2m_n[0]
    BD5 fmca_dp_c2m_p[1]
    BD6 fmca_dp_c2m_n[1]
    BB5 fmca_dp_c2m_p[2] fmca_dp_c2m_p[0]
    BB6 fmca_dp_c2m_n[2] fmca_dp_c2m_n[0]
    BC3 fmca_dp_c2m_p[3] fmca_dp_c2m_p[1] fmca_dp_c2m_p[0]
    BC4 fmca_dp_c2m_n[3] fmca_dp_c2m_n[1] fmca_dp_c2m_n[0]
    Sink AW7 fmca_dp_m2c_p[0] fmca_dp_m2c_p[0] fmca_dp_m2c_p[0]
    AW8 fmca_dp_m2c_n[0] fmca_dp_m2c_n[0] fmca_dp_m2c_n[0]
    BA7 fmca_dp_m2c_p[1] fmca_dp_m2c_p[1] Not applicable
    BA8 fmca_dp_m2c_n[1] fmca_dp_m2c_n[1]
    AY5 fmca_dp_m2c_p[2] Not applicable
    AY6 fmca_dp_m2c_n[2]
    AV5 fmca_dp_m2c_p[3]
    AV6 fmca_dp_m2c_n[3]
    Transceiver Avalon® Memory-Mapped Interface Group XCVR_RECONFIG_GROUP Enable Disable Disable
    Table 27.  Pin Assignments for Bitec FMC Revision 10
    DisplayPort Pin Location ( Intel® Arria® 10 Development Kit) Four Lanes Two Lanes One lane
    Source BC7 fmca_dp_c2m_p[0] fmca_dp_c2m_p[0] fmca_dp_c2m_p[0]
    BC8 fmca_dp_c2m_n[0] fmca_dp_c2m_n[0] fmca_dp_c2m_n[0]
    BD5 fmca_dp_c2m_p[1] fmca_dp_c2m_p[1] Not Applicable
    BD6 fmca_dp_c2m_n[1] fmca_dp_c2m_n[1]
    BB5 fmca_dp_c2m_p[2] Not Applicable
    BB6 fmca_dp_c2m_n[2]
    BC3 fmca_dp_c2m_p[3]
    BC4 fmca_dp_c2m_n[3]
    Sink AW7 fmca_dp_m2c_p[0] fmca_dp_m2c_p[0] fmca_dp_m2c_p[0]
    AW8 fmca_dp_m2c_n[0] fmca_dp_m2c_n[0] fmca_dp_m2c_n[0]
    BA7 fmca_dp_m2c_p[1] fmca_dp_m2c_p[1] Not Applicable
    BA8 fmca_dp_m2c_n[1] fmca_dp_m2c_n[1]
    AY5 fmca_dp_m2c_p[2] Not Applicable
    AY6 fmca_dp_m2c_n[2]
    AV5 fmca_dp_m2c_p[3]
    AV6 fmca_dp_m2c_n[3]
    Merging of Reconfiguration Interfaces XCVR_RECONFIG_GROUP Enable Enable Enable
    Table 28.  Pin Assignments for Bitec FMC Revision 11
    DisplayPort Pin Location

    ( Intel® Arria® 10 Development Kit)

    		Four Lanes Two Lanes One Lane
    Source BC7 fmca_dp_c2m_p[0] fmca_dp_c2m_p[0] fmca_dp_c2m_p[0]
    BC8 fmca_dp_c2m_n[0] fmca_dp_c2m_n[0] fmca_dp_c2m_n[0]
    BD5 fmca_dp_c2m_p[1] fmca_dp_c2m_p[1] Not applicable
    BD6 fmca_dp_c2m_n[1] fmca_dp_c2m_n[1]
    BB5 fmca_dp_c2m_p[2] Not applicable
    BB6 fmca_dp_c2m_n[2]
    BC3 fmca_dp_c2m_p[3]
    BC4 fmca_dp_c2m_n[3]
    Sink AW7 fmca_dp_m2c_p[0] Not applicable Not applicable
    AW8 fmca_dp_m2c_n[0]
    BA7 fmca_dp_m2c_p[1]
    BA8 fmca_dp_m2c_n[1]
    AY5 fmca_dp_m2c_p[2] fmca_dp_m2c_p[0]
    AY6 fmca_dp_m2c_n[2] fmca_dp_m2c_n[0]
    AV5 fmca_dp_m2c_p[3] fmca_dp_m2c_p[1] fmca_dp_m2c_p[0]
    AV6 fmca_dp_m2c_n[3] fmca_dp_m2c_n[1] fmca_dp_m2c_n[0]
    Transceiver Avalon® Memory-Mapped Interface Group XCVR_RECONFIG_GROUP Enable Disable Disable
    Note: You can disable the non-applicable pin assignments in the Assignment Editor.
Level Two Title