DisplayPort Intel® Arria 10 FPGA IP Design Example User Guide

Download PDF
ID 683050
Date 11/12/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide 2. Parallel Loopback Design Examples 3. HDCP Over DisplayPort Design Example for Intel® Arria® 10 Devices 4. DisplayPort Intel® Arria® 10 FPGA IP Design Example User Guide Archives 5. Revision History for DisplayPort Intel® Arria® 10 FPGA IP Design Example User Guide
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide x
1.1. Directory Structure 1.2. Hardware and Software Requirements 1.3. Generating the Design 1.4. Simulating the Design 1.5. Compiling and Testing the Design 1.6. DisplayPort Intel® FPGA IP Design Example Parameters
1.5. Compiling and Testing the Design x
1.5.1. Regenerating ELF File
2. Parallel Loopback Design Examples x
2.1. Intel® Arria® 10 DisplayPort SST Parallel Loopback Design Features 2.2. Intel® Arria® 10 DisplayPort MST Parallel Loopback Design Features 2.3. Enabling Adaptive Sync Support 2.4. Creating RX-Only or TX-Only Designs 2.5. Design Components 2.6. Clocking Scheme 2.7. Interface Signals and Parameters 2.8. Hardware Setup 2.9. Simulation Testbench 2.10. DisplayPort Transceiver Reconfiguration Flow 2.11. Transceiver Lane Configurations
3. HDCP Over DisplayPort Design Example for Intel® Arria® 10 Devices x
3.1. High-bandwidth Digital Content Protection (HDCP) 3.2. HDCP Over DisplayPort Design Example Architecture 3.3. Nios II Processor Software Flow 3.4. Design Walkthrough 3.5. Protection of Encryption Key Embedded in FPGA Design 3.6. Debug Guidelines
3.4. Design Walkthrough x
3.4.1. Set Up the Hardware 3.4.2. Generate the Design 3.4.3. Include HDCP Production Keys 3.4.4. Compile the Design 3.4.5. View the Results
3.4.3. Include HDCP Production Keys x
3.4.3.1. Store plain HDCP production keys in the FPGA (Support HDCP Key Management = 0) 3.4.3.2. Store encrypted HDCP production keys in the external flash memory or EEPROM (Support HDCP Key Management = 1)
3.4.3.1. Store plain HDCP production keys in the FPGA (Support HDCP Key Management = 0) x
3.4.3.1.1. HDCP Key Mapping from DCP Key Files 3.4.3.1.2. hdcp1x_tx_kmem.v and hdcp1x_rx_kmem.v files 3.4.3.1.3. hdcp2x_rx_kmem.v file 3.4.3.1.4. hdcp2x_tx_kmem.v file
3.4.3.2. Store encrypted HDCP production keys in the external flash memory or EEPROM (Support HDCP Key Management = 1) x
3.4.3.2.1. Intel KEYENC 3.4.3.2.2. Key Programmer
3.4.5. View the Results x
3.4.5.1. LED Functions
3.5. Protection of Encryption Key Embedded in FPGA Design x
3.5.1. Security Considerations
3.6. Debug Guidelines x
3.6.1. HDCP Status Signals 3.6.2. Modifying HDCP Software Parameters 3.6.3. Frequently Asked Questions (FAQ)
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide
2. Parallel Loopback Design Examples
3. HDCP Over DisplayPort Design Example for Intel® Arria® 10 Devices
4. DisplayPort Intel® Arria® 10 FPGA IP Design Example User Guide Archives
5. Revision History for DisplayPort Intel® Arria® 10 FPGA IP Design Example User Guide

2.3. Enabling Adaptive Sync Support

To enable support for the Adaptive Sync feature in the design examples without PCR, you need to edit the MSA_TIMING_PAR_IGNORED bit of the DPCD 00007h register and the MSA_TIMING_PAR_IGNORE_EN bit of the DPCD 00107h register in the rx_utils.c file in the software folder.
Note: The Adaptive Sync feature is applicable only when you turn on the Enable GPU control parameter.
To edit the bits:
  1. Locate data[7] = 0x80; // DPCD_ADDR_DOWN_STREAM_PORT_COUNT.
  2. Change 0x80 to 0xC0.
  3. Locate data[7] = 0x00; // DPCD_ADDR_DOWNSPREAD_CTRL
  4. Change 0x00 to 0x80.
  5. Regenerate the ELF file, refer to Regenerating ELF File.
  6. After programming the SOF file into the FPGA, program the updated ELF file into the FPGA.
Level Two Title