DisplayPort Intel® Arria 10 FPGA IP Design Example User Guide

Download PDF
ID 683050
Date 11/12/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide 2. Parallel Loopback Design Examples 3. HDCP Over DisplayPort Design Example for Intel® Arria® 10 Devices 4. DisplayPort Intel® Arria® 10 FPGA IP Design Example User Guide Archives 5. Revision History for DisplayPort Intel® Arria® 10 FPGA IP Design Example User Guide
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide x
1.1. Directory Structure 1.2. Hardware and Software Requirements 1.3. Generating the Design 1.4. Simulating the Design 1.5. Compiling and Testing the Design 1.6. DisplayPort Intel® FPGA IP Design Example Parameters
1.5. Compiling and Testing the Design x
1.5.1. Regenerating ELF File
2. Parallel Loopback Design Examples x
2.1. Intel® Arria® 10 DisplayPort SST Parallel Loopback Design Features 2.2. Intel® Arria® 10 DisplayPort MST Parallel Loopback Design Features 2.3. Enabling Adaptive Sync Support 2.4. Creating RX-Only or TX-Only Designs 2.5. Design Components 2.6. Clocking Scheme 2.7. Interface Signals and Parameters 2.8. Hardware Setup 2.9. Simulation Testbench 2.10. DisplayPort Transceiver Reconfiguration Flow 2.11. Transceiver Lane Configurations
3. HDCP Over DisplayPort Design Example for Intel® Arria® 10 Devices x
3.1. High-bandwidth Digital Content Protection (HDCP) 3.2. HDCP Over DisplayPort Design Example Architecture 3.3. Nios II Processor Software Flow 3.4. Design Walkthrough 3.5. Protection of Encryption Key Embedded in FPGA Design 3.6. Debug Guidelines
3.4. Design Walkthrough x
3.4.1. Set Up the Hardware 3.4.2. Generate the Design 3.4.3. Include HDCP Production Keys 3.4.4. Compile the Design 3.4.5. View the Results
3.4.3. Include HDCP Production Keys x
3.4.3.1. Store plain HDCP production keys in the FPGA (Support HDCP Key Management = 0) 3.4.3.2. Store encrypted HDCP production keys in the external flash memory or EEPROM (Support HDCP Key Management = 1)
3.4.3.1. Store plain HDCP production keys in the FPGA (Support HDCP Key Management = 0) x
3.4.3.1.1. HDCP Key Mapping from DCP Key Files 3.4.3.1.2. hdcp1x_tx_kmem.v and hdcp1x_rx_kmem.v files 3.4.3.1.3. hdcp2x_rx_kmem.v file 3.4.3.1.4. hdcp2x_tx_kmem.v file
3.4.3.2. Store encrypted HDCP production keys in the external flash memory or EEPROM (Support HDCP Key Management = 1) x
3.4.3.2.1. Intel KEYENC 3.4.3.2.2. Key Programmer
3.4.5. View the Results x
3.4.5.1. LED Functions
3.5. Protection of Encryption Key Embedded in FPGA Design x
3.5.1. Security Considerations
3.6. Debug Guidelines x
3.6.1. HDCP Status Signals 3.6.2. Modifying HDCP Software Parameters 3.6.3. Frequently Asked Questions (FAQ)
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide
2. Parallel Loopback Design Examples
3. HDCP Over DisplayPort Design Example for Intel® Arria® 10 Devices
4. DisplayPort Intel® Arria® 10 FPGA IP Design Example User Guide Archives
5. Revision History for DisplayPort Intel® Arria® 10 FPGA IP Design Example User Guide

1.4. Simulating the Design

The DisplayPort Intel® FPGA IP design example testbench simulates a serial loopback design from a TX instance to an RX instance. An internal video pattern generator module drives the DisplayPort TX instance and the RX instance video output connects to CRC checkers in the testbench.
Figure 4. Design Simulation Flow
  1. Navigate to the simulation folder of your choice.
  2. Run the simulation script for the supported simulator. The script compiles and runs the testbench in the simulator.
  3. Analyze the results.
    Table 3.  Steps to Run Simulation
    Simulator Working Directory Instructions
    Riviera-PRO* /simulation/aldec
    In the command line, type 
    vsim -c -do aldec.do
    ModelSim* /simulation/mentor
    In the command line, type 
    vsim -c -do mentor.do
    Xcelium* /simulation/xcelium
    In the command line, type 
    source xcelium.sh
    VCS* /simulation/synopsys/vcs
    In the command line, type 
    source vcs_sim.sh
    VCS* MX /simulation/synopsys/vcsmx
    In the command line, type 
    source vcsmx_sim.sh
    A successful simulation ends with the following message: 
    # SINK CRC_R = ac9c, CRC_G = ac9c, CRC_B = ac9c,
# SOURCE CRC_R = ac9c, CRC_G = ac9c, CRC_B = ac9c,
# Pass: Test Completed
Level Two Title